<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" dtd-version="3.0">
  <front>
    <journal-meta>
<journal-id journal-id-type="publisher">TC</journal-id>
<journal-title-group>
<journal-title>The Cryosphere</journal-title>
<abbrev-journal-title abbrev-type="publisher">TC</abbrev-journal-title>
<abbrev-journal-title abbrev-type="nlm-ta">The Cryosphere</abbrev-journal-title>
</journal-title-group>
<issn pub-type="epub">1994-0424</issn>
<publisher><publisher-name>Copernicus GmbH</publisher-name>
<publisher-loc>Göttingen, Germany</publisher-loc>
</publisher>
</journal-meta>

    <article-meta>
      <article-id pub-id-type="doi">10.5194/tc-9-1427-2015</article-id><title-group><article-title>Assimilation of Antarctic velocity observations provides evidence for uncharted pinning points</article-title>
      </title-group><?xmltex \runningtitle{Evidence for pinning points}?><?xmltex \runningauthor{J.~J.~F\"{u}rst et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1 aff2">
          <name><surname>Fürst</surname><given-names>J. J.</given-names></name>
          <email>johannes.fuerst@lgge.obs.ujf-grenoble.fr</email>
        <ext-link>https://orcid.org/0000-0003-3988-5849</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2">
          <name><surname>Durand</surname><given-names>G.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2">
          <name><surname>Gillet-Chaulet</surname><given-names>F.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2">
          <name><surname>Merino</surname><given-names>N.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2">
          <name><surname>Tavard</surname><given-names>L.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Mouginot</surname><given-names>J.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff4">
          <name><surname>Gourmelen</surname><given-names>N.</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1 aff2 aff5">
          <name><surname>Gagliardini</surname><given-names>O.</given-names></name>
          
        <ext-link>https://orcid.org/0000-0001-9162-3518</ext-link></contrib>
        <aff id="aff1"><label>1</label><institution>CNRS, Laboratoire de Glaciologie et Géophysique de l'Environnement (LGGE), Grenoble, France</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>Université Grenoble Alpes, LGGE, Grenoble, France</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>University of California, Department of Earth System Science, Irvine, USA</institution>
        </aff>
        <aff id="aff4"><label>4</label><institution>The University of Edinburgh, School of GeoSciences, Edinburgh, UK</institution>
        </aff>
        <aff id="aff5"><label>5</label><institution>Institut Universitaire de France, Paris, France</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">J. J. Fürst (johannes.fuerst@lgge.obs.ujf-grenoble.fr)</corresp></author-notes><pub-date><day>4</day><month>August</month><year>2015</year></pub-date>
      
      <volume>9</volume>
      <issue>4</issue>
      <fpage>1427</fpage><lpage>1443</lpage>
      <history>
        <date date-type="received"><day>16</day><month>February</month><year>2015</year></date>
           <date date-type="rev-request"><day>5</day><month>March</month><year>2015</year></date>
           <date date-type="rev-recd"><day>25</day><month>May</month><year>2015</year></date>
           <date date-type="accepted"><day>18</day><month>June</month><year>2015</year></date>
      </history>
      <permissions>
<license license-type="open-access">
<license-p>This work is licensed under a Creative Commons Attribution 3.0 Unported License. To view a copy of this license, visit <ext-link ext-link-type="uri" xlink:href="http://creativecommons.org/licenses/by/3.0/">http://creativecommons.org/licenses/by/3.0/</ext-link></license-p>
</license>
</permissions><self-uri xlink:href="https://tc.copernicus.org/articles/.html">This article is available from https://tc.copernicus.org/articles/.html</self-uri>
<self-uri xlink:href="https://tc.copernicus.org/articles/.pdf">The full text article is available as a PDF file from https://tc.copernicus.org/articles/.pdf</self-uri>


      <abstract>
    <p>In ice flow modelling, the use of control methods to assimilate the dynamic
and geometric state of an ice body has become common practice. These methods
have primarily focussed on inverting for one of the two least known
properties in glaciology, namely the basal friction coefficient or the ice
viscosity parameter. Here, we present an approach to infer both properties
simultaneously for the whole of the Antarctic ice sheet. After the
assimilation, the root-mean-square deviation between modelled and observed
surface velocities attains 8.7 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for the entire domain, with
a slightly higher value of 14.0 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for the ice shelves. An
exception in terms of the velocity mismatch is the Thwaites Glacier Ice
Shelf, where the RMS value is almost 70 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. The reason is that
the underlying Bedmap2 geometry ignores the presence of an ice rise, which
exerts major control on the dynamics of the eastern part of the ice shelf. On
these grounds, we suggest an approach to account for pinning points not
included in Bedmap2 by locally allowing an optimisation of basal friction
during the inversion. In this way, the velocity mismatch on the ice shelf of
Thwaites Glacier is more than halved. A characteristic velocity mismatch
pattern emerges for unaccounted pinning points close to the marine shelf
front. This pattern is exploited to manually identify seven uncharted features
around Antarctica that exert significant resistance to the shelf flow.
Potential pinning points are detected on Fimbul, West, Shackleton, Nickerson
and Venable ice shelves. As pinning points can provide substantial resistance
to shelf flow, with considerable consequences if they became ungrounded in
the future, the model community is in need of detailed bathymetry there. Our
data assimilation points to some of these dynamically important features not
present in Bedmap2 and implicitly quantifies their relevance.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p>More than 60 % of the grounded parts of
the Antarctic ice sheet extends into a distinct floating ice shelf
<xref ref-type="bibr" rid="bib1.bibx14" id="paren.1"/>. A minority of these shelves can be
considered to be mostly unconfined, which implies that their influence on the
upstream ice flow is limited <xref ref-type="bibr" rid="bib1.bibx55" id="paren.2"><named-content content-type="pre">e.g.</named-content></xref>. The vast
majority are however confined and exert control on the upstream ice flow and
by extension on the ice discharge from the grounded ice sheet. Ice discharge
is the flux over the grounding line
<xref ref-type="bibr" rid="bib1.bibx56 bib1.bibx12 bib1.bibx51" id="paren.3"><named-content content-type="pre">e.g.</named-content></xref>,
which itself is the delineation of where the ice body starts to float on its
way to the ice-sheet margin. Changes in ice discharge rates quantify the
dynamic contribution of the ice sheet to sea level
<xref ref-type="bibr" rid="bib1.bibx48" id="paren.4"/>, because it is there where the ice overburden
is no longer supported by an underlying bed. As most shelves are well
confined, a reduction or even a loss in the resistance provided by these
confinements is expected to trigger an abrupt increase in ice discharge and
thus in rates of sea-level contribution <xref ref-type="bibr" rid="bib1.bibx13" id="paren.5"/>.</p>
      <p>An ice-shelf confinement can simply be an embayment formed either by
promontories or by ridges with grounded ice protruding from the ice sheet. In
such a setup, the shelf experiences high lateral resistance
<xref ref-type="bibr" rid="bib1.bibx57" id="paren.6"/>. This resistance is directly identifiable from
pronounced cross-flow gradients in the observed surface velocities. Other
confinements are embedded within floating ice shelves and are thus
disconnected from the hinterland. For these pinning points, the ice shelf
locally runs aground and the bed contact provides friction at the basal
interface. Pinning points often give rise to longitudinal resistance, i.e.
a pressure acting on a plane perpendicular to the ice flow. Any form of
resistance imposed on the membrane-like flow regime of an ice shelf is often
referred to as buttressing <xref ref-type="bibr" rid="bib1.bibx21 bib1.bibx55" id="paren.7"/>. In
general, there are three distinct classes of pinning points
<xref ref-type="bibr" rid="bib1.bibx1 bib1.bibx57" id="paren.8"><named-content content-type="pre">e.g.</named-content></xref>: ice rises, ice
rumples and ephemeral ice rumples. Ice rises show a rather strong basal
contact and they are characterised by a locally defined flow regime which is
normally well expressed in the surface topography. For ice rumples, the
contact is weaker and thus the flow regime is primarily determined
non-locally by the dynamic state of the surrounding ice shelf. Ice rumples
are called ephemeral if there is evidence that the weak bed contact is not
permanent. Ocean tides, for instance, give rise to such intermittent contact.
In any case, pinning points do not necessarily require a large horizontal
extent to significantly alter the large-scale shelf flow.</p>
      <p>When assimilating observations on the geometric and dynamic state of an ice
sheet with a flow model, attention has to be paid to pinning points as their
influence on the shelf dynamics can reach far. In glaciological modelling,
data assimilation often takes the observed geometry for granted and tries to
optimise unknown model parameters to minimise the mismatch to other
observations <xref ref-type="bibr" rid="bib1.bibx38" id="paren.9"><named-content content-type="pre">e.g.</named-content></xref>. For this purpose, inverse
methods or control methods have been suggested that aim at minimising
differences between observed and modelled surface velocities under a given
geometry <xref ref-type="bibr" rid="bib1.bibx38" id="paren.10"/>. Based on Antarctic-wide compilations of
ice geometry and surface velocities
<xref ref-type="bibr" rid="bib1.bibx50 bib1.bibx14" id="paren.11"/>,
<xref ref-type="bibr" rid="bib1.bibx41" id="text.12"/> and <xref ref-type="bibr" rid="bib1.bibx4" id="text.13"/> have
shown that inverse methods are feasible at the continental scale. Both studies
use a state-of-the-art ice flow model to infer the largely unknown basal
friction beneath the grounded part of the Antarctic ice sheet. They find that
low friction is widespread and can indeed reach far inland along tributary
glaciers and ice streams. Here, we want to pursue a similar approach to
assimilate velocity observations but we aim at a better quantification and
understanding of remaining velocity differences.</p>
      <p>In principle, remaining velocity differences can arise from three main
sources during the data assimilation. They can originate from the
optimisation procedure, the ice flow model or the actual measurements. In the
first case, the optimisation might suffer from a bad choice of the cost
function or an excessive regularisation term. Moreover, convergence has to be
guaranteed. Second discrepancies can arise from the underlying flow model.
This can imply that the model physics is not appropriate to describe the
observed flow behaviour. In this case, the model might rely on approximations
not suitable for a particular flow regime or might ignore essential
processes. Another point is that the model resolution chosen has to be
compatible with the observations. Finally, remaining discrepancies might be
linked to the observational input. Measurements come with
uncertainties, which intrinsically impedes their reproduction. In order to capture the spatial variability
of observed surface velocities, the resolution of the geometry input has to
be sufficiently fine. In large data compilations, any inconsistencies among
different data sources or simple local incompleteness might also give reason
to biases. In regions where fast changes are observed, acquisition dates of
ice flow and geometry should be as contemporaneous as possible.</p>
      <p>In this study, we apply control methods on the recent data sets for
Antarctic-wide ice geometry and surface velocities (Sect. <xref ref-type="sec" rid="Ch1.S2"/>).
The aim is to assess the origin of remaining differences between the observed
and modelled velocities (Sect. <xref ref-type="sec" rid="Ch1.S3"/>). It is found that
mismatches are most expressed on the ice shelves in areas where pinning
points are missing in the Bedmap2 data set (Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS1"/>). We
suggest an approach to account for complementary information on grounding in
the inversion (Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS2"/>) and use a characteristic mismatch
pattern to identify, to this day, uncharted pinning points
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS3"/>).</p>
</sec>
<sec id="Ch1.S2">
  <title>Model description</title>
<sec id="Ch1.S2.SS1">
  <title>Ice flow model</title>
      <p>Elmer/Ice is an open-source 3-D thermomechanically coupled ice flow model
<xref ref-type="bibr" rid="bib1.bibx15 bib1.bibx17 bib1.bibx16" id="paren.14"/>
and the glaciological extension of the Elmer finite element software
developed at the Center for Science in Finland
( CSC-IT, <uri>http://www.csc.fi/elmer/</uri>). It is an efficient, state-of-the-art tool
to solve the full complexity of the underlying force balance equations.</p>
      <p>As we put the focus on the floating parts of the ice sheet, a model variant
is applied that solves the shallow-shelf approximation <xref ref-type="bibr" rid="bib1.bibx37" id="paren.15"><named-content content-type="pre">SSA;
e.g.</named-content></xref>. In this approximation, gravitational driving is
balanced by basal friction and by an overall adjustment of the stress regime,
which is communicated by gradients in membrane stresses
<xref ref-type="bibr" rid="bib1.bibx21" id="paren.16"/>. Basal friction is considered negligible for floating
ice shelves. There, the membrane stress effect exclusively depends on the
effective viscosity <inline-formula><mml:math display="inline"><mml:mi mathvariant="italic">η</mml:mi></mml:math></inline-formula> of the material. The effective viscosity comprises
the non-linearity in the constitutive equation, which links the deviatoric
stress field <inline-formula><mml:math display="inline"><mml:mi mathvariant="bold-italic">τ</mml:mi></mml:math></inline-formula> to rates of strain or ice deformation.

                <disp-formula id="Ch1.E1" content-type="numbered"><mml:math display="block"><mml:mrow><mml:mi mathvariant="italic">η</mml:mi><mml:mo>=</mml:mo><mml:mfrac><mml:mn mathvariant="normal">1</mml:mn><mml:mn mathvariant="normal">2</mml:mn></mml:mfrac><mml:mo>⋅</mml:mo><mml:mi>B</mml:mi><mml:mo>⋅</mml:mo><mml:msubsup><mml:mi mathvariant="italic">ε</mml:mi><mml:mi mathvariant="normal">e</mml:mi><mml:mrow><mml:mo>(</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>-</mml:mo><mml:mi>n</mml:mi><mml:mo>)</mml:mo><mml:mo>/</mml:mo><mml:mi>n</mml:mi></mml:mrow></mml:msubsup></mml:mrow></mml:math></disp-formula>

          Here, <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">ε</mml:mi><mml:mi mathvariant="normal">e</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:msqrt><mml:mrow><mml:msub><mml:mi mathvariant="italic">ε</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mi>j</mml:mi></mml:mrow></mml:msub><mml:mo>⋅</mml:mo><mml:msub><mml:mi mathvariant="italic">ε</mml:mi><mml:mrow><mml:mi>i</mml:mi><mml:mi>j</mml:mi></mml:mrow></mml:msub><mml:mo>/</mml:mo><mml:mn mathvariant="normal">2</mml:mn></mml:mrow></mml:msqrt></mml:mrow></mml:math></inline-formula> is the second invariant of the strain rate tensor
<inline-formula><mml:math display="inline"><mml:mi mathvariant="bold-italic">ε</mml:mi></mml:math></inline-formula>. We assume isotropic material properties and a flow
exponent of <inline-formula><mml:math display="inline"><mml:mrow><mml:mi>n</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula>. For shelf dynamics, <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> is sometimes referred to as ice
rigidity <xref ref-type="bibr" rid="bib1.bibx8 bib1.bibx34" id="paren.17"><named-content content-type="pre">e.g.</named-content></xref>. However,
terms such as rigidity and stiffness are strictly associated with elastic
deformation. As <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> determines the readiness of the viscous material to
deform under a given stress, <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> is here referred to as the viscosity
parameter <xref ref-type="bibr" rid="bib1.bibx60" id="paren.18"/>. To facilitate readability, we will
likewise refer to it as the ice viscosity, though this is only the case for
linearity in the constitutive equation, i.e. a Newtonian fluid.</p>
      <p>At the ice–bedrock interface, a Coulomb-like friction law is applied
<xref ref-type="bibr" rid="bib1.bibx43" id="paren.19"/>:

                <disp-formula id="Ch1.E2" content-type="numbered"><mml:math display="block"><mml:mrow><mml:msub><mml:mi mathvariant="bold-italic">τ</mml:mi><mml:mi mathvariant="normal">b</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>⋅</mml:mo><mml:msub><mml:mi mathvariant="bold-italic">v</mml:mi><mml:mi mathvariant="normal">b</mml:mi></mml:msub><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="bold-italic">τ</mml:mi><mml:mi mathvariant="normal">b</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="bold-italic">v</mml:mi><mml:mi mathvariant="normal">b</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> are vectors tangential
to the glacier base for basal shear stress and ice velocity respectively.
<inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> denotes the positively defined basal friction coefficient.</p>
</sec>
<sec id="Ch1.S2.SS2">
  <title>Mesh</title>
      <p>The analysis presented here will focus on ice shelves, ice streams and fast
outlet glaciers. Anisotropic mesh adaptation allows us to refine the grid in
these regions <xref ref-type="bibr" rid="bib1.bibx40 bib1.bibx17" id="paren.20"/>.
First we distinguish between floating and grounded parts of the ice sheet,
for which the target resolutions are respectively 1.2 and 50 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>. The
lower bound is imposed by computational limitations. For any location away
from the grounding line, the final grid shows a nominal resolution close to
these values. The decrease in resolution takes place upstream of the
grounding line and spans a band of roughly 100 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>. In addition to
this, the grid is refined in areas where flow magnitudes exceed
10 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. There, the refinement follows the Hessian matrix of the
observed velocities
<xref ref-type="bibr" rid="bib1.bibx40 bib1.bibx17" id="paren.21"/>. In this way,
maximum resolution is ensured for both the floating fringes of Antarctica and
the main tributaries.</p>
</sec>
<sec id="Ch1.S2.SS3">
  <title>Control method</title>
      <p>On the basis of the SSA equations, we simultaneously infer basal friction
<inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> and ice viscosity <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> using control methods building on the
approach described in <xref ref-type="bibr" rid="bib1.bibx17" id="text.22"/> and
<xref ref-type="bibr" rid="bib1.bibx16" id="text.23"/>. In contrast to their methodology, we
conduct a dual inversion as
introduced by <xref ref-type="bibr" rid="bib1.bibx3" id="text.24"/> and applied on Antarctic
scales by <xref ref-type="bibr" rid="bib1.bibx4" id="text.25"/>. Additionally, we adjust the cost
function and start from a physically based initial guess for the two
inversion variables. Convergence of the optimisation is assumed to be reached
after 950 iterations. Then, the cost function decrease saturates and the
overall root-mean-square (RMS) mismatch compares to the error in the velocity
observations <xref ref-type="bibr" rid="bib1.bibx26 bib1.bibx50" id="paren.26"/>. Any further
convergence is considered to entail overfitting.</p>
      <p>The total cost function <inline-formula><mml:math display="inline"><mml:mi>J</mml:mi></mml:math></inline-formula> comprises the velocity mismatch and two
regularisation terms.

                <disp-formula id="Ch1.E3" content-type="numbered"><mml:math display="block"><mml:mrow><mml:mi>J</mml:mi><mml:mo>=</mml:mo><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mo>+</mml:mo><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub><mml:mo>⋅</mml:mo><mml:msubsup><mml:mi>J</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow><mml:mtext>reg</mml:mtext></mml:msubsup><mml:mo>+</mml:mo><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>B</mml:mi></mml:msub><mml:mo>⋅</mml:mo><mml:msubsup><mml:mi>J</mml:mi><mml:mi>B</mml:mi><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></disp-formula>

          The mismatch between modelled and observed velocities is comprised in the
first cost term <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>. Here, we use the original form suggested in
<xref ref-type="bibr" rid="bib1.bibx38" id="text.27"/> that accounts for differences in both horizontal
velocity components. <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> is
a discrete sum evaluated at all data locations. During the inversion, we
actually optimise multiplier fields <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>m</mml:mi><mml:mi>B</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> of the form <inline-formula><mml:math display="inline"><mml:mrow><mml:mi>B</mml:mi><mml:mo>=</mml:mo><mml:msubsup><mml:mi>m</mml:mi><mml:mi>B</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msubsup><mml:mo>⋅</mml:mo><mml:msub><mml:mi>B</mml:mi><mml:mtext>ini</mml:mtext></mml:msub></mml:mrow></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx17" id="paren.28"><named-content content-type="pre">also see</named-content></xref>. The applied
regularisation in turn penalises first spatial derivatives in the respective
multiplier fields <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>m</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>m</mml:mi><mml:mi>B</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. The two additional terms
<inline-formula><mml:math display="inline"><mml:mrow><mml:msubsup><mml:mi>J</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:msubsup><mml:mi>J</mml:mi><mml:mi>B</mml:mi><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> are added to the total cost
<inline-formula><mml:math display="inline"><mml:mi>J</mml:mi></mml:math></inline-formula>. They improve the conditioning of the underlying problem by suppressing
overfitting of the velocity observations.</p>
      <p>Since there is an interdependence when inverting for two variables
simultaneously, the inferred fields are dependent on the initial guess
<xref ref-type="bibr" rid="bib1.bibx3" id="paren.29"/>. To guarantee that the inferred
variables remain in a physical range, the initial fields have to be
selected with care. The initial guess for <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> is found by
assuming that basal drag equals the local driving stress. From another
inversion of basal friction on Antarctica
<xref ref-type="bibr" rid="bib1.bibx41" id="paren.30"/>, we know that over most of the ice
sheet interior these two are nearly equal. There, the initialisation
of <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> is expected to strongly facilitate the convergence of our
optimisation. In regions where the ice flow becomes channelised and
the large-scale character of ice-sheet dynamics is violated, this
initialisation is less appropriate.</p>
      <p>The initial field for the ice viscosity parameter <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> is calculated from an
ice temperature reconstruction <xref ref-type="bibr" rid="bib1.bibx61" id="paren.31"/>. Ice-shelf
temperatures are inferred from assuming a local balance of surface
accumulation and basal melt, as described in <xref ref-type="bibr" rid="bib1.bibx44" id="text.32"/>. The 3-D
temperature information is translated into an ice
viscosity using a standard
Arrhenius relation <xref ref-type="bibr" rid="bib1.bibx43" id="paren.33"/>. Viscosity values are thereafter
vertically averaged. Underlying temperatures come, however, with a certain
uncertainty of several degrees Celsius
<xref ref-type="bibr" rid="bib1.bibx59 bib1.bibx44 bib1.bibx61" id="paren.34"/>. To test
whether the inversion is sensitive to the initial temperature-based (TB)
guess, we employ two options to replace these values on the ice shelves
following <xref ref-type="bibr" rid="bib1.bibx8" id="text.35"/>. Avoiding their formal usage of
flow-line theory, <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> is determined by equating the horizontal force exerted
in flow direction by ice deformation (the latter known from strain rates)
with the vertically integrated hydrostatic back pressure. Apart from a
different choice for the direction (namely perpendicular to the grounding
line), Eqs. (6) and (8) in <xref ref-type="bibr" rid="bib1.bibx19" id="text.36"/> determine the two
required pressure terms while <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> becomes accessible using the model-specific constitutive
equation (as Eq. 20). The new <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> field is referred to as the hydrostatically
balanced (HB) viscosity. In its original form, <xref ref-type="bibr" rid="bib1.bibx8" id="text.37"/>
exclusively used this HB viscosity where values are lower than the TB field.
As this correction is motivated from identifying the state of ice damage on
floating shelves, we refer to this initial <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> field as the damage-corrected
(DC) viscosity.</p>
</sec>
<sec id="Ch1.S2.SS4">
  <title>Observational input</title>
<sec id="Ch1.S2.SS4.SSS1">
  <title>Ice sheet geometry</title>
      <p>The ice sheet geometry is based on the recent Bedmap2 data compilation,
presented at 1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> resolution <xref ref-type="bibr" rid="bib1.bibx14" id="paren.38"/>. The
Bedmap2 thickness map is inferred from roughly 25 million measurements, with
about 2.5 % of crossover information. Analysis of all crossovers
indicates that 50 % of the measurement differences fall in a 5 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
window around the median at <inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. As data were collected over
several decades, this agreement seems to justify the assumption that changes
in the ice sheet geometry through time are comparably small with respect to
the measurement uncertainty. However, the standard deviation in the
crossover differences is stated with 50 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, suggesting that
a non-negligible number of data either come at higher measurement
uncertainty, are biased by the mission-specific methodology or simply suffer
from geometric changes over time. In the Amundsen Sea embayment, the upper
ice surface was observed to have decreased a lot during the observational
record <xref ref-type="bibr" rid="bib1.bibx45 bib1.bibx46" id="paren.39"/>. In
the frontal area of Pine Island Glacier (PIG), a 2011 survey had to be
excluded from Bedmap2, as thinning reached 40 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> with respect to more
extensive earlier surveys conducted in 2004/05
<xref ref-type="bibr" rid="bib1.bibx62 bib1.bibx22" id="paren.40"/>. Near the grounding
line, the Bedmap2 geometry might be less reliable because of large
uncertainties in firn density and thickness, violation of the flotation
assumption and a data interpolation that aims at providing continuity across
the grounding line
<xref ref-type="bibr" rid="bib1.bibx18 bib1.bibx14 bib1.bibx12" id="paren.41"/>.</p>
      <p>The Bedmap2 surface elevation, bedrock elevation, ice thickness and a given
mask, for whether ice is grounded or afloat, are interpolated onto the model
grid. For the Antarctic ice shelves, flotation needs to be assured in the
model. The reason is that otherwise a bias is introduced on the hydrostatic
back pressure propagating into the inversion. In any prognostic application,
the geometry would immediately be put afloat in the flow model. The most
direct option is to locally adjust the density of the ice column according to
flotation (case abbreviated with <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>). This option has the advantage
that no changes have to be applied to the Bedmap2 geometry product. If one
accepts prior changes, three geometry fields of the Bedmap2 could be
readjusted, i.e. the upper and lower ice-shelf surfaces and the ice
thickness. Prescribing one of them, the other two follow from the standard
model densities for sea water and ice respectively at 1028 and
917 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. The three options are thus the prescription of either
the thickness (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula>), the upper surface (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula>) or the lower
surface (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>) from observations. All these options were implemented
under the condition that the ice base did not exceed the bedrock topography.
Independent of these geometric changes, the original Bedmap2 mask is used to
delineate the area where no basal friction is applied. For completeness, we
want to present another, more physically based, approach to guarantee
flotation, not pursued here. It relies on the sparse information on the firn
density and firn thickness distribution over ice shelves
<xref ref-type="bibr" rid="bib1.bibx30 bib1.bibx31" id="paren.42"/>. In this approach,
the upper surface is a priori lowered on the basis of the assumed firn
properties before inferring the ice thickness from hydrostatic equilibrium.</p>
      <p>Following option <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>, a spatially variable density field with
a shelf average of 865 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> is obtained. The derived density
field shows, however, areas in which values exceed the density of most compact
marine ice 940 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx11" id="paren.43"><named-content content-type="pre">e.g</named-content></xref> or
fall below typical values for dense firn of 700 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. Either
way, these values are beyond the physical range as they are representative
for the entire ice column. The standard model density lies at
917 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">kg</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and is thus higher than the inferred average, which
results in a general lowering of the surface elevation by 15 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> for
adjusting the geometry according to option <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula>. If the upper
(<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula>) or lower surface (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>) is prescribed, the shelf
thickness is either increased or decreased by comparable values.</p>
</sec>
<sec id="Ch1.S2.SS4.SSS2">
  <title>Surface velocities</title>
      <p>Information on the dynamic state of the entire Antarctic ice sheet was
recently brought together and presented in a single database by
<xref ref-type="bibr" rid="bib1.bibx50" id="text.44"/>. Surface velocity magnitudes were inferred
from synthetic aperture radar (SAR) imagery acquired between 1996 and 2009
with five different satellite-mounted sensors. The coverage of this velocity
mosaic is almost complete and errors in the inferred flow field fall below
10 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> over most of Antarctica. We do not use the later
released high-resolution data but base ourselves on the earlier product with
a 900 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> sample spacing, because the inversion is limited by the
1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> grid of the Bedmap2 geometry. The velocity observations are not
interpolated onto the model grid, because the underlying finite element
approach intrinsically allows us to compute the velocity solution at any
location. During the minimisation of the cost function, differences between
modelled and observed flow speeds are calculated at the data locations in the
velocity mosaic.</p>
</sec>
<sec id="Ch1.S2.SS4.SSS3">
  <title>Complementary grounding line information</title>
      <p>As a complement to the Bedmap2 product, independent snapshot information on
grounding line positions all around Antarctica between 1994 and 2009 from
differential satellite SAR interferometry (dInSAR) was consulted
<xref ref-type="bibr" rid="bib1.bibx49" id="paren.45"/>. This complementary information is of
particular interest where pinning points on ice shelves are missing in
Bedmap2. Though already identified in 2001
<xref ref-type="bibr" rid="bib1.bibx47 bib1.bibx52" id="paren.46"/>, a large ice rise on the
eastern ice shelf of Thwaites Glacier (TWG) does not appear in Bedmap2 due to
a lack of bathymetry data in this region. The friction this ice rise exerts
at the shelf base is well imprinted in the surface velocity field, as flow
speeds there are extremely low. A delineation of this ice rise, as in
<xref ref-type="bibr" rid="bib1.bibx52" id="text.47"/>, was available. Not as influential, but also
missing in Bedmap2 and <xref ref-type="bibr" rid="bib1.bibx49" id="text.48"/>, Bawden Ice Rise (BIR)
is situated on the northeastern marine front of Larsen C (LC) Ice Shelf
<xref ref-type="bibr" rid="bib1.bibx8" id="paren.49"/>. We manually delineated the BIR using
ALOS/PALSAR imagery.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S3">
  <title>Results</title>
      <p>In Sects. <xref ref-type="sec" rid="Ch1.S3.SS1"/> and <xref ref-type="sec" rid="Ch1.S3.SS2"/>, results are
exclusively based on the Bedmap2 geometry without consulting other sources of
information. First, two technical choices on the regularisation
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS1.SSS1"/>) and the parameter initialisation
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS1.SSS2"/>) are presented. Thereafter, different options
to impose flotation on the model geometry are assessed
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS1.SSS3"/>). For this comparison, the well-studied LC
shelf is chosen. Subsequently, we pursue an assessment of the velocity
mismatch after the inversion (Sect. <xref ref-type="sec" rid="Ch1.S3.SS2"/>) for the whole of the ice
sheet and individual ice shelves. As the bathymetry beneath ice shelves is
widely unknown, the Bedmap2 geometry ignores many pinning points.
Complementary information on grounded ice is used to locate these areas,
which allows us to discern a characteristic pattern in the velocity mismatch
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS1"/>). We then assimilate this complementary
information in our inversion by allowing a local optimisation of the friction
coefficient (Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS2"/>). In a final step, we identify other
potential pinning points not included in the data sets at hand
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS3.SSS3"/>).</p>
<sec id="Ch1.S3.SS1">
  <title>A priori decisions</title>
<sec id="Ch1.S3.SS1.SSS1">
  <title>Regularisation</title>
      <p>During the iterative optimisation of the cost function, its initial value is
decreased by more than 3 orders of magnitude. This primarily reduces the
mismatch between modelled and observed velocities (Fig. <xref ref-type="fig" rid="Ch1.F1"/>). The
simultaneous inversion of two parameters seems sufficiently well conditioned,
by the applied regularisation and the fact that on the ice shelves only one
parameter, namely the viscosity parameter <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula>, is inferred.</p>
      <p>In order to retrieve an appropriate parameter combination for
<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>B</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, we rely on the L curve method
<xref ref-type="bibr" rid="bib1.bibx20 bib1.bibx24 bib1.bibx41" id="paren.50"><named-content content-type="pre">e.g.</named-content><named-content content-type="post">and references
therein</named-content></xref>. The
L curve gives a means to find a trade-off between fitting a target quantity
while keeping a certain smoothness in the optimised variable. In our case, we
define an L surface by quantifying
the mismatch between observed and modelled velocities <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> as a function of
the two regularisation terms <inline-formula><mml:math display="inline"><mml:mrow><mml:msubsup><mml:mi>J</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math display="inline"><mml:mrow><mml:msubsup><mml:mi>J</mml:mi><mml:mi>B</mml:mi><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> (Fig. <xref ref-type="fig" rid="Ch1.F2"/>). Each position on this plot is
associated with one parameter combination and the sampling is equally spaced
in a logarithmic sense. The L surface allows the identification of an area in
parameter space avoiding two extremes: either overfitting of the velocity
observations or excessive regularisation that dominates the cost function
<inline-formula><mml:math display="inline"><mml:mi>J</mml:mi></mml:math></inline-formula>. The exact parameter choice depends on the later purpose of the inverted
fields. As our interest is in the velocity mismatch, which is correlated to
<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, we choose the combination for which <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>J</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> passes through a first local
minimum when decreasing <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>B</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>. This local
minimum is attained for <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mo>=</mml:mo><mml:msup><mml:mn> 10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> and
<inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">λ</mml:mi><mml:mi>B</mml:mi></mml:msub><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mo>=</mml:mo><mml:msup><mml:mn> 10</mml:mn><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1" specific-use="star"><caption><p>Difference of ice velocity magnitudes (simulated minus observed)
over the Antarctic ice sheet. The result is based on the
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> geometry accounting for complementary information on pinning
points. White areas over ice-covered areas indicate regions without velocity
information. Pink squares indicate observed grounding line locations not
included in Bedmap2 and further away than 5 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> from grounded areas in
Bedmap2 (PIN5). The black contour line delineates the floating shelves. Black
rectangles indicate locations of insets.</p></caption>
            <?xmltex \igopts{width=478.006299pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f01.jpg"/>

          </fig>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1" specific-use="star"><caption><p>RMS deviation between simulated and observed velocity components for
different regions. For the inversion, different option to ensure flotation on
the ice shelves are assessed. As a reference, the input geometry is kept
while assuming a constant ice density (Bedmap2). A second option is to
locally adjust the density field on the ice shelves according to flotation
(<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>). Otherwise, an a priori adjustment of the geometry is
necessary, keeping either the upper surface (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula>), the lower surface
(<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>) or the thickness of the ice shelves (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula>) from
Bedmap2. For initialising the viscosity parameter on the shelves, three
options are assessed based  on inferred ice temperatures (TB),
a local hydrostatic balance (HB) or a compromise of both used to identify
damaged ice (DC). Complementary information on pinning points
(Sect. <xref ref-type="sec" rid="Ch1.S2.SS4.SSS3"/>) is accounted for in the inversion dependent on
their distance from the Bedmap2 grounding line. Data are included if the
distance is larger than either 1, 5 or 10 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>, referred to as setup
PIN1, PIN5 and PIN10 respectively.</p></caption><oasis:table frame="topbot"><?xmltex \begin{scaleboxenv}{.95}[.95]?><oasis:tgroup cols="12">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:colspec colnum="8" colname="col8" align="right"/>
     <oasis:colspec colnum="9" colname="col9" align="right"/>
     <oasis:colspec colnum="10" colname="col10" align="right"/>
     <oasis:colspec colnum="11" colname="col11" align="right"/>
     <oasis:colspec colnum="12" colname="col12" align="right"/>
     <oasis:thead>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">Ice geometry</oasis:entry>  
         <oasis:entry colname="col3">Bedmap2</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col8"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col9"><inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> shelf</oasis:entry>  
         <oasis:entry colname="col10">PIN1</oasis:entry>  
         <oasis:entry colname="col11">PIN5</oasis:entry>  
         <oasis:entry colname="col12">PIN10</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">Initial viscosity</oasis:entry>  
         <oasis:entry colname="col3">TB</oasis:entry>  
         <oasis:entry colname="col4">TB</oasis:entry>  
         <oasis:entry colname="col5">TB</oasis:entry>  
         <oasis:entry colname="col6">TB</oasis:entry>  
         <oasis:entry colname="col7">TB</oasis:entry>  
         <oasis:entry colname="col8">DC</oasis:entry>  
         <oasis:entry colname="col9">HB</oasis:entry>  
         <oasis:entry colname="col10">TB</oasis:entry>  
         <oasis:entry colname="col11">TB</oasis:entry>  
         <oasis:entry colname="col12">TB</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1">Region</oasis:entry>  
         <oasis:entry colname="col2"/>  
         <oasis:entry colname="col3"/>  
         <oasis:entry colname="col4"/>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>  
         <oasis:entry colname="col8"/>  
         <oasis:entry colname="col9"/>  
         <oasis:entry colname="col10"/>  
         <oasis:entry colname="col11"/>  
         <oasis:entry colname="col12"/>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Ross Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">9.3</oasis:entry>  
         <oasis:entry colname="col4">8.9</oasis:entry>  
         <oasis:entry colname="col5">12.4</oasis:entry>  
         <oasis:entry colname="col6">14.0</oasis:entry>  
         <oasis:entry colname="col7">10.6</oasis:entry>  
         <oasis:entry colname="col8">10.5</oasis:entry>  
         <oasis:entry colname="col9">10.4</oasis:entry>  
         <oasis:entry colname="col10">10.3</oasis:entry>  
         <oasis:entry colname="col11">10.0</oasis:entry>  
         <oasis:entry colname="col12">10.3</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Filchner–Ronne Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">11.6</oasis:entry>  
         <oasis:entry colname="col4">11.8</oasis:entry>  
         <oasis:entry colname="col5">14.9</oasis:entry>  
         <oasis:entry colname="col6">18.4</oasis:entry>  
         <oasis:entry colname="col7">14.0</oasis:entry>  
         <oasis:entry colname="col8">13.9</oasis:entry>  
         <oasis:entry colname="col9">13.8</oasis:entry>  
         <oasis:entry colname="col10">13.7</oasis:entry>  
         <oasis:entry colname="col11">13.5</oasis:entry>  
         <oasis:entry colname="col12">13.8</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Brunt/Stancomb-Wills Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">16.0</oasis:entry>  
         <oasis:entry colname="col4">15.8</oasis:entry>  
         <oasis:entry colname="col5">18.4</oasis:entry>  
         <oasis:entry colname="col6">19.3</oasis:entry>  
         <oasis:entry colname="col7">16.4</oasis:entry>  
         <oasis:entry colname="col8">16.1</oasis:entry>  
         <oasis:entry colname="col9">16.2</oasis:entry>  
         <oasis:entry colname="col10">15.9</oasis:entry>  
         <oasis:entry colname="col11">15.7</oasis:entry>  
         <oasis:entry colname="col12">16.1</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Shackleton Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">24.0</oasis:entry>  
         <oasis:entry colname="col4">26.8</oasis:entry>  
         <oasis:entry colname="col5">30.9</oasis:entry>  
         <oasis:entry colname="col6">32.8</oasis:entry>  
         <oasis:entry colname="col7">27.6</oasis:entry>  
         <oasis:entry colname="col8">27.2</oasis:entry>  
         <oasis:entry colname="col9">27.2</oasis:entry>  
         <oasis:entry colname="col10">22.4</oasis:entry>  
         <oasis:entry colname="col11">23.1</oasis:entry>  
         <oasis:entry colname="col12">22.9</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Amery Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">7.3</oasis:entry>  
         <oasis:entry colname="col4">7.2</oasis:entry>  
         <oasis:entry colname="col5">9.7</oasis:entry>  
         <oasis:entry colname="col6">29.2</oasis:entry>  
         <oasis:entry colname="col7">9.3</oasis:entry>  
         <oasis:entry colname="col8">9.1</oasis:entry>  
         <oasis:entry colname="col9">9.1</oasis:entry>  
         <oasis:entry colname="col10">9.0</oasis:entry>  
         <oasis:entry colname="col11">8.7</oasis:entry>  
         <oasis:entry colname="col12">9.1</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Larsen C </oasis:entry>  
         <oasis:entry colname="col3">9.5</oasis:entry>  
         <oasis:entry colname="col4">9.4</oasis:entry>  
         <oasis:entry colname="col5">11.6</oasis:entry>  
         <oasis:entry colname="col6">12.1</oasis:entry>  
         <oasis:entry colname="col7">10.6</oasis:entry>  
         <oasis:entry colname="col8">10.5</oasis:entry>  
         <oasis:entry colname="col9">10.4</oasis:entry>  
         <oasis:entry colname="col10">9.5</oasis:entry>  
         <oasis:entry colname="col11">9.4</oasis:entry>  
         <oasis:entry colname="col12">9.7</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Dotson Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">24.3</oasis:entry>  
         <oasis:entry colname="col4">23.3</oasis:entry>  
         <oasis:entry colname="col5">30.3</oasis:entry>  
         <oasis:entry colname="col6">24.9</oasis:entry>  
         <oasis:entry colname="col7">27.4</oasis:entry>  
         <oasis:entry colname="col8">27.1</oasis:entry>  
         <oasis:entry colname="col9">27.0</oasis:entry>  
         <oasis:entry colname="col10">26.8</oasis:entry>  
         <oasis:entry colname="col11">26.1</oasis:entry>  
         <oasis:entry colname="col12">26.8</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Crosson Ice Shelf </oasis:entry>  
         <oasis:entry colname="col3">15.8</oasis:entry>  
         <oasis:entry colname="col4">15.5</oasis:entry>  
         <oasis:entry colname="col5">19.0</oasis:entry>  
         <oasis:entry colname="col6">24.9</oasis:entry>  
         <oasis:entry colname="col7">17.9</oasis:entry>  
         <oasis:entry colname="col8">17.7</oasis:entry>  
         <oasis:entry colname="col9">17.5</oasis:entry>  
         <oasis:entry colname="col10">17.4</oasis:entry>  
         <oasis:entry colname="col11">17.0</oasis:entry>  
         <oasis:entry colname="col12">17.4</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Thwaites Glacier shelf </oasis:entry>  
         <oasis:entry colname="col3">57.9</oasis:entry>  
         <oasis:entry colname="col4">57.5</oasis:entry>  
         <oasis:entry colname="col5">85.7</oasis:entry>  
         <oasis:entry colname="col6">76.2</oasis:entry>  
         <oasis:entry colname="col7">67.8</oasis:entry>  
         <oasis:entry colname="col8">68.1</oasis:entry>  
         <oasis:entry colname="col9">66.0</oasis:entry>  
         <oasis:entry colname="col10">28.9</oasis:entry>  
         <oasis:entry colname="col11">31.1</oasis:entry>  
         <oasis:entry colname="col12">29.3</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry namest="col1" nameend="col2">Pine Island Glacier shelf </oasis:entry>  
         <oasis:entry colname="col3">31.4</oasis:entry>  
         <oasis:entry colname="col4">30.9</oasis:entry>  
         <oasis:entry colname="col5">37.3</oasis:entry>  
         <oasis:entry colname="col6">67.2</oasis:entry>  
         <oasis:entry colname="col7">34.0</oasis:entry>  
         <oasis:entry colname="col8">33.6</oasis:entry>  
         <oasis:entry colname="col9">33.6</oasis:entry>  
         <oasis:entry colname="col10">33.4</oasis:entry>  
         <oasis:entry colname="col11">32.9</oasis:entry>  
         <oasis:entry colname="col12">33.5</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Grounded part </oasis:entry>  
         <oasis:entry colname="col3">7.6</oasis:entry>  
         <oasis:entry colname="col4">7.6</oasis:entry>  
         <oasis:entry colname="col5">8.0</oasis:entry>  
         <oasis:entry colname="col6">24.0</oasis:entry>  
         <oasis:entry colname="col7">7.9</oasis:entry>  
         <oasis:entry colname="col8">7.8</oasis:entry>  
         <oasis:entry colname="col9">7.8</oasis:entry>  
         <oasis:entry colname="col10">7.8</oasis:entry>  
         <oasis:entry colname="col11">7.8</oasis:entry>  
         <oasis:entry colname="col12">7.9</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Floating part </oasis:entry>  
         <oasis:entry colname="col3">12.8</oasis:entry>  
         <oasis:entry colname="col4">12.9</oasis:entry>  
         <oasis:entry colname="col5">16.6</oasis:entry>  
         <oasis:entry colname="col6">20.6</oasis:entry>  
         <oasis:entry colname="col7">15.2</oasis:entry>  
         <oasis:entry colname="col8">14.9</oasis:entry>  
         <oasis:entry colname="col9">14.8</oasis:entry>  
         <oasis:entry colname="col10">14.2</oasis:entry>  
         <oasis:entry colname="col11">14.0</oasis:entry>  
         <oasis:entry colname="col12">14.3</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry namest="col1" nameend="col2">Antarctica </oasis:entry>  
         <oasis:entry colname="col3">8.4</oasis:entry>  
         <oasis:entry colname="col4">8.4</oasis:entry>  
         <oasis:entry colname="col5">9.5</oasis:entry>  
         <oasis:entry colname="col6">23.7</oasis:entry>  
         <oasis:entry colname="col7">9.1</oasis:entry>  
         <oasis:entry colname="col8">9.0</oasis:entry>  
         <oasis:entry colname="col9">9.0</oasis:entry>  
         <oasis:entry colname="col10">8.8</oasis:entry>  
         <oasis:entry colname="col11">8.7</oasis:entry>  
         <oasis:entry colname="col12">8.9</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup><?xmltex \end{scaleboxenv}?></oasis:table></table-wrap>

      <?xmltex \floatpos{p}?><fig id="Ch1.F2"><caption><p>L surface obtained for the simultaneous optimisation of two
variables as a function of the respective regularisation terms.</p></caption>
            <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f02.png"/>

          </fig>

</sec>
<sec id="Ch1.S3.SS1.SSS2">
  <title>Parameter initialisation</title>
      <p>As our later assessment will focus on the performance of the inversion on the
ice shelves, the sensitivity of the inferred viscosity is assessed under
three initial fields that differ only on the floating parts
(Sect. <xref ref-type="sec" rid="Ch1.S2.SS3"/>). The final pattern and magnitude of the viscosity
<inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> compare well, independent of the initially chosen fields. They result in similar RMS deviation values for
single shelves and the entire ice sheet (Table <xref ref-type="table" rid="Ch1.T1"/>). Locally, where
the DC and the HB option prescribe a very low initial <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> value, the inferred
viscosity field remains low after the regularised inversion. In general,
however, the inversion is robust under different initial fields. For the
latter results, we choose the TB initialisation because it is readily
implemented and has a physical meaning for floating and grounded ice.</p>
      <p>After the inversion, the multiplier for the friction field <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>m</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula> is
characterised by values close to unity for most of the ice sheet interior.
Along regions of fast ice flow,  however, the inversion finds very low values,
as confirmed by an earlier inversion on the continental scale
<xref ref-type="bibr" rid="bib1.bibx41 bib1.bibx4" id="paren.51"/>. The
multiplier field <inline-formula><mml:math display="inline"><mml:mrow><mml:msub><mml:mi>m</mml:mi><mml:mi>B</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> for the ice viscosity generally falls into the range
of 0.1 and 10. The low variability suggests that both initial fields are well
chosen in view of this dual inversion.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p>Ice viscosity parameter <bold>(a–c)</bold> as inferred by the control
method for the Larsen C Ice Shelf. Velocity difference <bold>(d–f)</bold> as in
Fig. <xref ref-type="fig" rid="Ch1.F1"/>. Panels <bold>(a, d)</bold> show results based on the actual
Bedmap2 geometry, while panels <bold>(b, e)</bold> show results after flotation
is guaranteed using the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> method. Inversion results on Larsen C
for the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> geometry accounting for friction beneath pinning points
not included in Bedmap2 <bold>(c, f)</bold>. Grey shading indicates observed
velocity magnitude on grounded parts of the ice sheet. The Bedmap2 shelf
extent is indicated by a black contour line. On the shelf, black
dashed and white lines indicate observed and modelled streamlines
respectively. The black dashed line on the grounded areas gives the
100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> isoline of the observed surface velocities. Locations
of pinning points (PIN5) not in Bedmap2 are indicated with pink squares in
panel <bold>(e)</bold>.</p></caption>
            <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f03.jpg"/>

          </fig>

</sec>
<sec id="Ch1.S3.SS1.SSS3">
  <title>Geometry at flotation</title>
      <p>In general, any option for imposing flotation on the shelf geometry in the
model results in lower ice viscosity from the inversion as compared to the
unadjusted case (Fig. <xref ref-type="fig" rid="Ch1.F3"/>a and b). The reasoning depends on the
details of how flotation is imposed. For case <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula> the shelf density
is lower, resulting in less gravitational forcing, which is compensated by
a small viscosity decrease in order to balance the same hydrostatic back
pressure. In case <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> the ice-shelf volume beneath sea level is
higher than in the original Bedmap2 geometry, resulting in an increased
hydrostatic back pressure, compensated by lowering <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula>. When the bottom shelf
surface is prescribed <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>, the back pressure is the same as for the
original Bedmap2 data set. However, the shelf thickness and with it the
driving stress are reduced, compensated in our inversion by a decrease in the
viscosity parameter. The last case <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula> is a combination of
increasing both the driving stress and the back pressure simultaneously by
thickening the shelf ice. As this results in the lowest <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> values, the
influence of the increased water back pressure seems dominant. In cases
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> and <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>, the pursued adaptations of the shelf geometry
also result in steeper surface gradients. Their influence seems secondary compared to the
simultaneous effect from increasing back pressure by surface lowering in
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> or decreasing driving stress by thinning in <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>.</p>
      <p><?xmltex \hack{\newpage}?>Judging from the RMS deviation between observed and modelled surface
velocities (Table <xref ref-type="table" rid="Ch1.T1"/>), the choice on how to impose flotation
affects the performance of the inversion. RMS values for the entire ice sheet
indicate that the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula> geometry is least preferable. The other
options show more comparable RMS values. The best agreement with observations
is obtained with the unadjusted Bedmap2 geometry without and with the
density corrections (<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>). This good agreement is confirmed on the
floating and grounded parts separately as well as on the level of individual
ice shelves. For a further assessment, we consult the inferred viscosity
parameter <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula>. An average viscosity value for LC is 0.48 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">MPa</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>
for the unadjusted Bedmap2 geometry without density corrections. In this
case, <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> is biased towards high values as the geometry is not in balance
with the flotation criterion in the model (Fig. <xref ref-type="fig" rid="Ch1.F3"/>a). The four
options to guarantee flotation, <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> and
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula>, result in average ice-shelf viscosities of 0.46, 0.42, 0.37 and
0.31 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">MPa</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> respectively. As compared to the un-adjusted case,
all shelf-average values are reduced but no preference can be given to either
case. <xref ref-type="bibr" rid="bib1.bibx23" id="text.52"/> forwarded an optimal value of
<inline-formula><mml:math display="inline"><mml:mn>0.44</mml:mn></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">MPa</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> when minimising the velocity mismatch with a
uniform viscosity parameter. This value is, on view, confirmed by another
inversion study on Larsen C <xref ref-type="bibr" rid="bib1.bibx31" id="paren.53"/>. Also in terms
of the velocity RMS deviation, the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula>, <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula> and
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> options result in similar values. A decision can therefore not
been taken considering only a single quantity.</p>
      <p>The <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">D</mml:mi></mml:math></inline-formula> option performs best in terms of RMS deviation and the
resultant viscosity average compares well with other studies. However, issues
arise for initialisation to prognostic modelling. Forward modelling is faced
with advecting this density field while the underlying flow model comprises
no processes that would cause spatial variability in the first place. The
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">U</mml:mi></mml:math></inline-formula> geometry would be a good compromise in terms of RMS and
viscosity average, yet the general increase of the ice-shelf thickness lacks
a physical justification and violates the bathymetric information in places.
From the remaining two options, the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">L</mml:mi></mml:math></inline-formula> option clearly performs
worse in terms of RMS and shows the lowest viscosity average. Option
<inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> remains and has the advantage that ice thickness and thus ice
volume is preserved from Bedmap2. The thickness is also the quantity which
has originally been inferred on a physical basis for the Bedmap2 product
<xref ref-type="bibr" rid="bib1.bibx18 bib1.bibx14" id="normal.54"/>.</p>
</sec>
</sec>
<sec id="Ch1.S3.SS2">
  <title>General performance</title>
      <p>In general, the inferred velocity field is in good agreement with
observations (Fig. <xref ref-type="fig" rid="Ch1.F1"/>). The RMS differences between observed and
modelled velocities reaches 8.7 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for the whole of the
Antarctic ice sheet (Table <xref ref-type="table" rid="Ch1.T1"/>). Remaining discrepancies are either
spatially confined or, if widespread, small in magnitude. A similar inversion
for the whole of Antarctica shows a saturation of the bulk RMS deviation at
<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>40</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> <xref ref-type="bibr" rid="bib1.bibx4" id="paren.55"/>. As they
constrain the inversion not only by observations on surface velocities but
also on accumulation rates and surface elevation changes, it is natural that
the velocity RMS deviation is more reduced for our inversion. Here we did not
follow their suggestions, as we do not want to initialise the flow model for
transient simulations. The aim is to identify locations where the model is
not able to reproduce observed ice flow.</p>
      <p>The velocity mismatch on the grounded part of the ice sheet is smaller than
on the floating parts, with RMS values of respectively 7.9 and
15.2 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> (Table <xref ref-type="table" rid="Ch1.T1"/>). In large parts of the ice sheet
interior, differences become very small (Fig. <xref ref-type="fig" rid="Ch1.F1"/>), justifying the
choice for a coarse grid. However, the coarse resolution becomes insufficient
for some channelised flow features. The velocity
observations come at 900 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
sample spacing and they are directly used in the optimisation. Therefore,
a general mismatch pattern emerges for such channelised flow: underestimation
of observed velocities in the centre of these channels and overestimation of
the lateral flow speeds. It is also apparent that where these channelised
features approach the grounding line, the mismatch decreases and often
vanishes as a direct consequence of the increasing resolution.</p>
      <p>The Filchner–Ronne (FR) Ice Shelf is the second largest distinct floating
unit of Antarctica. In an attempt to determine the complex rheology of the
larger Ronne section of this shelf, <xref ref-type="bibr" rid="bib1.bibx33" id="text.56"/> used
a similar inversion technique to determine <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula>. Having put the shelf geometry
afloat, they find values that vary between 0.3 and 0.9 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">MPa</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>,
confirming the range found here (Fig. <xref ref-type="fig" rid="Ch1.F4"/>). We also find soft ice in
the elongated shear bands at both lateral shelf margins. With the increasing
knowledge on ice velocities, our inversion is able to provide a viscosity map
much richer in small-scale features. Turning towards
differences between observed and
modelled velocities, the early study reported an average mismatch of
50 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. Here, we find a RMS value of 15 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for
the entire FR Ice Shelf. Though this might suggest a threefold reduction, a
direct comparison is impeded because the input geometry and velocity
observations differ.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4" specific-use="star"><caption><p>Ice viscosity parameter <bold>(a)</bold> and the difference between
simulated and observed ice velocity magnitudes <bold>(b)</bold> on
Filchner–Ronne Ice Shelf (as in Fig. <xref ref-type="fig" rid="Ch1.F1"/>). Shading and contour lines
as in Fig. <xref ref-type="fig" rid="Ch1.F3"/>. Results are based on the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> geometry without
complementary information on pinning points. White areas indicate regions
without velocity information.</p></caption>
          <?xmltex \igopts{width=355.659449pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f04.png"/>

        </fig>

      <p>After the disintegration of Larsen B in 2002
<xref ref-type="bibr" rid="bib1.bibx39" id="paren.57"/>, many studies were directed towards
assessing the dynamic conditions preceding this event or monitoring the
consequences for the tributary glaciers
<xref ref-type="bibr" rid="bib1.bibx54 bib1.bibx63 bib1.bibx64 bib1.bibx29 bib1.bibx53 bib1.bibx6" id="paren.58"/>.
In addition, the LC Ice Shelf received some attention, being the next ice
shelf in line just south of Larsen B
<xref ref-type="bibr" rid="bib1.bibx23 bib1.bibx31 bib1.bibx8 bib1.bibx32" id="paren.59"/>.
Prescribing a constant viscosity for the entire shelf,
<xref ref-type="bibr" rid="bib1.bibx23" id="text.60"/> succeed in reproducing the general pattern and
magnitude of the velocity field. The match is convincing in the central part
of the ice sheet, and a general tendency to underestimate observed velocities
becomes only apparent in the southern parts of the shelf. As the viscosity
parameter is spatially optimised, our inversion is free of such a regional
bias (Fig. <xref ref-type="fig" rid="Ch1.F3"/>e). In fact, regions where ice velocities are either
over- or underestimated cover a similar area with 59 and 42% of the total
ice-shelf surface respectively. In addition, the bulk RMS deviation is
9.4 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> and thus lies lower than the average mismatch for all
Antarctic shelves (Table <xref ref-type="table" rid="Ch1.T1"/>). In a more recent study, the LC
viscosity parameter was inferred with the aim to identify regions of damaged
ice <xref ref-type="bibr" rid="bib1.bibx31 bib1.bibx8" id="paren.61"/>. In general,
comparable <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> fields are obtained (Fig. <xref ref-type="fig" rid="Ch1.F3"/>b). On
Brunt/Stancomb-Wills Ice Shelf, inferred viscosity values are also comparable to a
recent regional model study <xref ref-type="bibr" rid="bib1.bibx34" id="paren.62"/>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5" specific-use="star"><caption><p>Velocity differences as in Fig. <xref ref-type="fig" rid="Ch1.F4"/> for the ice shelves in
the Amundsen Sea embayment. Results are based on the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> geometry
for the cases that complementary information on pinning points (pink
rectangles, PIN5) is not accounted for <bold>(a)</bold> or accounted for
<bold>(b)</bold> in the inversion. Shading, contour lines and markers as in
Fig. <xref ref-type="fig" rid="Ch1.F3"/>.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f05.png"/>

        </fig>

      <p>Highest surface velocities beyond 3000 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> are observed
in the Amundsen Sea sector (ASS) and more specifically for PIG and TWG. For the central part of the
PIG Ice Shelf, differences between simulated and observed flow
velocities are efficiently reduced (Fig. <xref ref-type="fig" rid="Ch1.F5"/>). However, for the
lateral shear margins, the mismatch exceeds 100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>, with
different sign on each side of the fast-flow unit of the ice shelf. As this alternating
pattern is identified for several other fast outlet glacier all around
Antarctica, it is symptomatic and might indicate resolution issues,
a regional under-convergence or a systematic minimum in the cost
function for such setups. Another reason might be that the flow model
is limited by the assumption of a continuous material, which might be
violated in these areas of high crevassing. Turning to the ice
viscosity, the inferred map shows two bands of very low values along
these shear margins (not shown). Using a similar approach,
<xref ref-type="bibr" rid="bib1.bibx27" id="text.63"/> inverted comparable zones of weak ice in
these areas.</p>
      <p>On the ice shelf of TWG, a strong across-flow gradient in
surface velocities is observed. Despite this gradient, our inversion
finds no pronounced band of low viscosity. However, we infer
untypically high viscosity <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> for the central eastern part of the ice shelf,
where values readily exceed 2.00 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">MPa</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mn mathvariant="normal">1</mml:mn><mml:mo>/</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. In addition,
the <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>80</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> shelf-wide RMS velocity deviation is
exceptionally elevated, with highest differences in this eastern
region. At the source of these extreme values is a unconsidered contact
between the bottom ice surface and the bathymetry (Sect. <xref ref-type="sec" rid="Ch1.S2.SS4.SSS3"/>).</p>
</sec>
<sec id="Ch1.S3.SS3">
  <title>Pinning point locations</title>
<sec id="Ch1.S3.SS3.SSS1">
  <title>Characteristic Bedmap2-based mismatch pattern</title>
      <p>The presented inversion is capable of adequately reproducing observed
ice velocities for the majority of ice sheet. Pronounced remaining
differences are spatially very confined and some features were
attributed to a lack in model physics or coarse model resolution
(Sect. <xref ref-type="sec" rid="Ch1.S3.SS2"/>). For floating ice away from the grounding line,
the SSA is an appropriate
description for ice dynamics. There, remaining differences between
modelled and observed velocities likely arise from observational
inconsistencies. In this section, we will characterise
a prominent pattern in the velocity mismatch where Bedmap2 ignores
the presence of pinning points known from complementary information (Sect. <xref ref-type="sec" rid="Ch1.S2.SS4.SSS3"/>).</p>
      <p>It is obvious from surface velocity observations that the eastern ice
shelf of TWG moves at much lower rates than the western parts. Towards
the ice margin, observed flow magnitudes decrease significantly and
the flow directions are deviated zonally. Flow resistance there
arises from an ice rise near the marine shelf front
<xref ref-type="bibr" rid="bib1.bibx47 bib1.bibx52" id="paren.64"/>. Since this ice rise
is absent in Bedmap2, it gives an explanation for the high RMS
deviation between observed and modelled surface velocities on this
shelf (Table <xref ref-type="table" rid="Ch1.T1"/>, Fig. <xref ref-type="fig" rid="Ch1.F5"/>). Nowhere else on
Antarctica do we find widespread and high differences largely
exceeding 100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. Near the ice-shelf front, velocities are
overestimated, while upstream of this narrow zone, inferred velocities
are too low. As observed and modelled velocities cannot be
conciliated, we consider that this ice rise has an important influence
on ice dynamics of the entire eastern ice shelf and the upstream
grounded ice flow. For other, less influential, pinning points not
included in Bedmap2, we expect a much less pronounced mismatch
pattern.</p>
      <p>For the BIR on the northern part of the LC ice shelf, Bedmap2 shows no
contact between the ice and the bathymetry (Fig. <xref ref-type="fig" rid="Ch1.F3"/>). Similar to the
TWG setup, this pinning point is located close to the marine ice front. As
basal friction there is kept zero
during our inversion, the model overestimated ice velocities in its vicinity
by more than 100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. The spatial extent of this velocity
mismatch reaches some 50 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> upstream. Further upstream, no distinct
pattern for underestimation emerges. In this context, it is striking that the
effect on the viscosity parameter <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> reaches much further upstream. This
might suggest that pinning points could be identified more directly from <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula>.
For the whole of Antarctica; however, we find that elevated viscosity values,
as found in this region on LC, are not necessarily associated with pinning
points but rather point to meteoric origins and little shearing of this ice.
Overestimated flow speeds are found to be characteristic for pinning points
absent in Bedmap2. For instance, near the McDonald Ice Rumples on
Brunt/Stancomb-Wills Ice Shelf, the mismatch also exceeds
100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> near the ice-shelf front (Fig. <xref ref-type="fig" rid="Ch1.F1"/>). Magnitudes
and pattern of this characteristic mismatch near unaccounted pinning points
are comparable for all options on how to impose flotation. This can partly be
inferred from the comparison of different geometry choices on Larsen C near
Bawden Ice Rise (Fig. <xref ref-type="fig" rid="Ch1.F3"/>a–c).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6" specific-use="star"><caption><p>Velocity differences as in Fig. <xref ref-type="fig" rid="Ch1.F4"/> for different ice shelves
around Antarctica: Fimbul <bold>(a)</bold>, Mushketov <bold>(b)</bold>,
West <bold>(c)</bold>, Shackleton <bold>(d)</bold>, Nickerson <bold>(e)</bold> and
Venable <bold>(f)</bold>. Results are based on the <inline-formula><mml:math display="inline"><mml:mi mathvariant="double-struck">T</mml:mi></mml:math></inline-formula> geometry when
accounting for complementary information on pinning points (PIN5) in the
inversion. Shading, contour lines and markers as in Fig. <xref ref-type="fig" rid="Ch1.F3"/>. Dark red
squares give the positions of the seven potential pinning points identified in
this study (Table <xref ref-type="table" rid="Ch1.T2"/>).</p></caption>
            <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f06.png"/>

          </fig>

      <p>Away from the close vicinity of the ice-sheet grounding line, the majority of
the pinning points identified in <xref ref-type="bibr" rid="bib1.bibx49" id="normal.65"/> are located
near the shelf fronts (Fig. <xref ref-type="fig" rid="Ch1.F1"/>). However, there are many pinning
points away from the marine fronts. For these points, we generally find that
the remaining velocity mismatch is comparable to or falls below typical shelf
RMS values (Figs. <xref ref-type="fig" rid="Ch1.F3"/>, <xref ref-type="fig" rid="Ch1.F5"/>, <xref ref-type="fig" rid="Ch1.F6"/> and Table <xref ref-type="table" rid="Ch1.T1"/>).
Therefore, it is difficult to discern these features from the mismatch map.
This indicates that either they are not as decisive for shelf
dynamics or our flow model can account for their effect in a different way.
Further inland, shelf ice generally experiences more resistance; thus ice
motion is slower and any model mismatch will be less expressed. It is also
more likely that multiple sources provide resistance to a certain location on
the ice shelf. Consequently, this
superposition gives the inversion a possibility to conceal a missing pinning
point by adjusting the weighting of various resistance sources via the
viscosity parameter.</p>
</sec>
<sec id="Ch1.S3.SS3.SSS2">
  <title>Accounting for complementary information</title>
      <p>In this section, the Bedmap2 product is supplemented using complementary
information on the location of shelf pinning from various sources
(Sect. <xref ref-type="sec" rid="Ch1.S2.SS4.SSS3"/>). These sources hold the location but
not the bathymetry of these pinning points. These locations are
stored in a mask which allows a local optimisation of the basal friction
coefficient, even though Bedmap2 shows floating ice.</p>
      <p>The dInSAR data from <xref ref-type="bibr" rid="bib1.bibx49" id="text.66"/> hold accurate pinning
point locations with a spatial spacing below the Bedmap2 grid spacing. The
Bedmap2 geometry was primarily gridded and processed on 5 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>
resolution and only rendered at 1 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> for its final release. The
majority of the complementary dInSAR data points are not more than
5 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> away from grounded areas in Bedmap2. Our interest is not in
sub-kilometre grounding line migration over the observational period but in
pinning points away from the main grounded ice body. Therefore we consider
points within a certain radius to grounded areas in Bedmap2 as redundant
information. Three radii are chosen to remove data points, namely 1, 5 and
10 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>, referred to as PIN1, PIN5 and PIN10 respectively. In order to
provide a mask that enters the inversion, the points in the Bedmap2 grid
closest
to the actual pinning point locations are classified as being grounded.
During the inversion, this mask defines extra locations where the basal
friction coefficient <inline-formula><mml:math display="inline"><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> is optimised though the Bedmap2 geometry
indicates flotation. It is important to not account for these locations in
the regularisation (<inline-formula><mml:math display="inline"><mml:mrow><mml:msubsup><mml:mi>J</mml:mi><mml:mrow><mml:msup><mml:mi mathvariant="italic">β</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow><mml:mtext>reg</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> in Eq. <xref ref-type="disp-formula" rid="Ch1.E3"/>) because
they introduce large spatial differences.</p>
      <p>Introducing ice rises in this way, the bulk velocity RMS deviation on the ice
shelves is not necessarily improved (Table <xref ref-type="table" rid="Ch1.T1"/>). It depends on the
selected radius and only PIN5 shows a clear global and shelf-to-shelf
improvement. Introducing friction on many shelf locations just a few
kilometres downstream of the Bedmap2 grounding line (PIN1) is not conducive
to the overall RMS performance of the inversion, as many of these points are
potential artefacts from the interpolated Bedmap2 geometry
<xref ref-type="bibr" rid="bib1.bibx14" id="paren.67"/>. PIN5 is largely free of such erratic
friction points as most pinning points lie far out on the ice shelves.</p>
      <p>On individual ice shelves clear improvements are observed. The RMS deviation
on the TWG Ice Shelf is reduced by a factor of <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> and a zone of
erroneously high viscosities is removed (not shown). In fact, the
introduction of friction beneath the ice rise of TWG alters the flow field on
the eastern part of the ice shelf significantly (Fig. <xref ref-type="fig" rid="Ch1.F5"/>a and b). As
ice flow is inhibited, flow lines get more aligned with observations and turn
away from the basal obstacle. We conclude that the ice rise in this region
has an important influence on the shelf dynamics of the eastern region. Also
on LC, the mismatch upstream of BIR is virtually removed (Fig. <xref ref-type="fig" rid="Ch1.F3"/>e
and f). In addition, the inferred viscosity parameter is regionally lowered
and hence more consistent with surrounding ice (Fig. <xref ref-type="fig" rid="Ch1.F3"/>b and c). On
the Brunt Ice Shelf, a similar improvement in the velocity mismatch is seen
upstream of the McDonald Ice Rumples. Though the <inline-formula><mml:math display="inline"><mml:mi>B</mml:mi></mml:math></inline-formula> field is somewhat
lowered, values were and are in a physically reasonable range both when
accounting for friction at the ice rumples and when not.</p>
      <p>Despite the strong improvement seen in these regions, the inversion is hardly
facilitated at many other locations where there is evidence for a pinning
point (Fig. <xref ref-type="fig" rid="Ch1.F6"/>). One obvious reason for no improvement is that the
mismatch was already small before accounting for friction there. This might
either indicate a weak basal contact or local overfitting unsuppressed by
the chosen regularisation. Moreover, many pinning features have a rather
small spatial extent, which is more or less well resolved depending on where
the model grid points fall. Another reason is that the inversion might not
be sufficiently converged, such that these small-scale features would become
relevant in the optimisation.</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T2" specific-use="star"><caption><p>Decimal longitudinal and latitudinal range where we find evidence
for potential pinning points (PPP). Also given are the respective shelf
names. The ice shelf east of Verblyud Island has no name. As
its main tributary is Mushketov Glacier, we refer to it as Mushketov Ice Shelf. If a peak in
the Bedmap2 surface elevation is discernible, its height is manually
estimated with respect to the surrounding shelf surface. If no peak is
identifiable, no number is given (“–”).</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="7">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:colspec colnum="3" colname="col3" align="left"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="left"/>
     <oasis:colspec colnum="7" colname="col7" align="left"/>
     <oasis:thead>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">Northern</oasis:entry>  
         <oasis:entry colname="col3">Southern</oasis:entry>  
         <oasis:entry colname="col4">Western</oasis:entry>  
         <oasis:entry colname="col5">Eastern</oasis:entry>  
         <oasis:entry colname="col6">Respective</oasis:entry>  
         <oasis:entry colname="col7">Height of topographic</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">boundary</oasis:entry>  
         <oasis:entry colname="col3">boundary</oasis:entry>  
         <oasis:entry colname="col4">boundary</oasis:entry>  
         <oasis:entry colname="col5">boundary</oasis:entry>  
         <oasis:entry colname="col6">ice-shelf name</oasis:entry>  
         <oasis:entry colname="col7">rise in Bedmap2</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">PPP1</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>70.12</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>70.19</oasis:entry>  
         <oasis:entry colname="col4">2.26</oasis:entry>  
         <oasis:entry colname="col5">2.50</oasis:entry>  
         <oasis:entry colname="col6">Fimbul</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP2</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>69.73</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>69.77</oasis:entry>  
         <oasis:entry colname="col4">17.27</oasis:entry>  
         <oasis:entry colname="col5">17.42</oasis:entry>  
         <oasis:entry colname="col6">Mushketov</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP3</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>69.70</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>69.74</oasis:entry>  
         <oasis:entry colname="col4">17.52</oasis:entry>  
         <oasis:entry colname="col5">17.71</oasis:entry>  
         <oasis:entry colname="col6">Mushketov</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">4</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP4</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>67.35</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>67.54</oasis:entry>  
         <oasis:entry colname="col4">81.39</oasis:entry>  
         <oasis:entry colname="col5">81.80</oasis:entry>  
         <oasis:entry colname="col6">West</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>15</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP5</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>66.20</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>66.27</oasis:entry>  
         <oasis:entry colname="col4">95.36</oasis:entry>  
         <oasis:entry colname="col5">95.60</oasis:entry>  
         <oasis:entry colname="col6">Shackleton</oasis:entry>  
         <oasis:entry colname="col7">–</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP6</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>75.36</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>75.47</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>145.20</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>144.73</oasis:entry>  
         <oasis:entry colname="col6">Nickerson</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">PPP7</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>72.92</oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>72.97</oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>86.66</oasis:entry>  
         <oasis:entry colname="col5"><inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>86.43</oasis:entry>  
         <oasis:entry colname="col6">Venable</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>10</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula></oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

</sec>
<sec id="Ch1.S3.SS3.SSS3">
  <title>Identification of uncharted basal contact</title>
      <p>The aim of this section is to use the velocity mismatch map to identify other
potential pinning points. Here, we limit our analysis to pinning points close
to the ice-shelf fronts, where our
approach tends to produce a characteristic signal in the difference map of
modelled and observed velocities. There, the signal is also expected to be
most pronounced. In addition to the mismatch information, we verify that
observed surface velocities actually decrease gradually towards the
respective ice front. The
identification is performed manually because there are some features that
clearly arise from concatenating the velocity mosaic. A good example is Brunt/Stancomb-Wills Ice
Shelf (Fig. <xref ref-type="fig" rid="Ch1.F1"/>), where the mismatch map shows an erratic alternation
near the northern shelf front that is traced back to different sensors and
acquisition dates. A similar artificial pattern is found close to the front
of Ross Ice Shelf, east of Roosevelt Island.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7"><caption><p>RAMP imagery for Fimbul <bold>(a)</bold>, Mushketov <bold>(b)</bold>,
Venable <bold>(c)</bold> and West Ice Shelf <bold>(d)</bold>. Blue rectangles
encircle the locations of the identified PPPs (Table <xref ref-type="table" rid="Ch1.T2"/>). Insets
show closeups of these locations with satellite imagery from LIMA. Orange
lines delineate multi-year grounding line positions by
<xref ref-type="bibr" rid="bib1.bibx49" id="text.68"/>.</p></caption>
            <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://tc.copernicus.org/articles/9/1427/2015/tc-9-1427-2015-f07.jpg"/>

          </fig>

      <p>We identify seven locations around Antarctica (Table <xref ref-type="table" rid="Ch1.T2"/>,
Figure <xref ref-type="fig" rid="Ch1.F6"/>), where there is strong evidence for resistance to the
ice-shelf flow and thus for a potential
pinning point (PPP). Unfortunately, none of these features is directly
crossed by Operation IceBridge flight lines. They are also not found to
be consistently attributed to geographic names.
The first feature, PPP1, is located at the eastern part of the marine front
of Fimbul Ice Shelf (Queen Maud Land), north of Tsiolkovskiy and Kroshka
islands (<ext-link xlink:href="https://www1.data.antarctica.gov.au/aadc/gaz/scar/">SCAR
Gazetteer</ext-link>, <ext-link xlink:href="http://geonames.usgs.gov/">US Board on Geographic Names</ext-link>).
SCAR Gazetteer actually comprises an ice dome at this location called Avrora Kupol, giving first evidence
of a topographic expression of this object. As surface expressions
can be detected from
satellite imagery, data from the RADARSAT-1 Antarctic Mapping Project
<xref ref-type="bibr" rid="bib1.bibx25" id="paren.69"><named-content content-type="pre"><ext-link xlink:href="http://nsidc.org/data/docs/daac/nsidc0103_ramp_mosaic.gd.html">RAMP</ext-link>,</named-content></xref>
and the Landsat Image Mosaic of Antarctica
<xref ref-type="bibr" rid="bib1.bibx7" id="paren.70"><named-content content-type="pre"><ext-link xlink:href="http://lima.usgs.gov/index.php">LIMA</ext-link>,</named-content></xref>
are consulted (Fig. <xref ref-type="fig" rid="Ch1.F7"/>). On Fimbul Ice Shelf, the imagery highlights
several surface features where we observe maximum velocity mismatch after the
inversion. As these features are close to each other, we cannot discern
whether one of them is dominant for the upstream ice-shelf flow. The two PPPs
on Mushketov Ice Shelf are further apart (<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">5</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>) and are both
well imprinted in the velocity mismatch map. On Venable Ice Shelf, the
satellite image shows a very gradual imprint of PPP7, while on West Ice Shelf
the surface is highly crevassed near PPP4. These differences in the surface
expression of pinning points pose a challenge when satellite imagery alone
was used for their identification. In fact, the surface elevation product of
Bedmap2 already holds a rise of <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> above PPP1
(Table <xref ref-type="table" rid="Ch1.T2"/>). Except for PPP5 on Shackleton Ice Shelf, we confirm
similar topographic rises in Bedmap2 at the locations of all the other
features.</p>
      <p>We find additional confirmation for this interpretation in a recent
International Bathymetric Chart of the Southern Ocean
<xref ref-type="bibr" rid="bib1.bibx2" id="paren.71"><named-content content-type="pre">IBCSO:</named-content></xref>. It is a comprehensive compilation of
bathymetric data around Antarctica. Its sub-shelf bathymetry is, however,
inherited from Bedmap2. On the ocean side of Fimbul Ice Shelf front, the map
shows a bathemetric rise just offshore of PPP1 reaching up to
<inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>190 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> below present sea level. The lower surface of the Bedmap2
ice shelf reaches down to <inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>210 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. Turning to PPP2 and PPP3, the
Bedmap2 ocean is very shallow (<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>&lt;</mml:mo><mml:mo>-</mml:mo></mml:mrow></mml:math></inline-formula>100 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>). The IBCSO bathymetry is
significantly deeper there, often by more than 200 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, showing two
distinct rises reaching about <inline-formula><mml:math display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>190 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> in close vicinity of PPP3.
Also at other PPP locations, IBCSO indicates offshore rises in the bathymetry
that are underestimated or ignored in Bedmap2.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S4" sec-type="conclusions">
  <title>Summary and conclusions</title>
      <p>We present a data
assimilation approach for the Antarctic ice sheet, inferring two variables
simultaneously, namely the basal friction coefficient and the ice viscosity
parameter. After convergence, the underlying cost function is reduced by more
than 3 orders of magnitude. For the whole of Antarctica, the RMS deviation in
the velocity components attains <inline-formula><mml:math display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>9.0 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. The match is
better on the grounded parts of the ice sheet, while it reaches an average of
<inline-formula><mml:math display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>15.2 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> for all ice shelves. In other studies, similar
inversions were conducted to infer the viscosity field of individual shelves
<xref ref-type="bibr" rid="bib1.bibx33 bib1.bibx8 bib1.bibx34" id="paren.72"/>.
The general pattern of our inferred viscosity maps agrees well with these
regional studies. In addition, the inversion problem is sufficiently
conditioned by a dual regularisation and a well-founded initial guess for the
two variables. On the ice shelves, the final viscosity map is mostly
unaffected by three variants for initialising the parameter field.</p>
      <p>As any model application on observed geometries requires an assumption on the
ice density, we present several options to guarantee flotation of the shelf
geometry in the model. In terms of minimising the velocity RMS deviation,
adjusting the ice density to guarantee flotation for the unadjusted Bedmap2
geometry is preferential. However, as a spatially variable density field
entails problems in forward modelling, the Bedmap2 thickness field is taken
and adjusted to flotation according to model densities for ice and ocean
water. If the Bedmap2 geometry is directly taken and not adjusted for
flotation, the inferred shelf viscosity is systematically biased. In our
case, putting the ice shelves afloat involves a general lowering of the upper
surface and, after inversion, less viscous shelf ice.</p>
      <p>Remaining velocity differences exhibit uncommonly high magnitudes for the ice
shelf of TWG, resulting in a bulk RMS mismatch of <inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>70</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. Large differences are actually limited to the eastern
part of this ice shelf, where values typically exceed 100 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>.
The differences there arise from an ice rise
<xref ref-type="bibr" rid="bib1.bibx52" id="paren.73"/> not included in Bedmap2 and thus
unaccounted for in our inversion. As the mismatch is particularly pronounced
in this region, this ice rise certainly exerts strong control on the upstream
shelf dynamics and, by extension, on the flow of the grounded ice sheet.
Therefore, an approach is forwarded that can account for pinning points not
present in Bedmap2 during the inversion without adapting the geometry.
Applying this approach, the bulk RMS for the TWG Ice Shelf is reduced to
<inline-formula><mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>30</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. For other shelves, the improvement is not as
expressed but still local mismatches are efficiently removed. Prominent
examples are the Bawden Ice Rise on Larsen C and the McDonald Ice Rumples on
Brunt Ice Shelf. For the whole of Antarctica, the RMS deviation is only
moderately reduced to 8.7 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> with most improvement on the ice
shelves (14.0 <inline-formula><mml:math display="inline"><mml:mrow><mml:mi mathvariant="normal">m</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">a</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>).</p>
      <p>We are also able to identify a characteristic pattern in the velocity
mismatch where the Bedmap2 geometry ignores the presence of pinning points
close to the marine shelf front. This information is used in a final step to
identify potential pinning points not included in the data sources at hand.
We locate seven features around Antarctica that provide prominent flow
resistance. Though the identification could be done on the sole basis of the
velocities observations or even directly from RADARSAT imagery, our approach
implicitly quantifies the effect of these pinning points on ice dynamics.
However, our identification does not claim to be complete. It should rather
serve to highlight locations relevant for shelf dynamics. Our identification
will miss out on ephemeral features that only appear in velocity observations
if data acquisition falls into periods of actual ice/bed contact. In
addition, our method is less efficient for pinning points away from the
ice-shelf front because there ice flow is more likely experiencing multiple
sources of resistance that reduce the signal amplitude.</p>
      <p>The interpretation of the seven features as pinning points is substantiated by
the Bedmap2 surface topography that indicates topographic rises of several
metres for six of them. Their surface expressions are also visible in RAMP and
LIMA satellite imagery. For further evidence, these features could be
delineated by means of dInSAR data <xref ref-type="bibr" rid="bib1.bibx49" id="paren.74"><named-content content-type="pre">e.g.</named-content></xref>.
If the bed contact was confirmed, only direct measurements, either in situ or
airborne, could answer to what extent these pinning points pierce the ice
body. Yet, such measurements are sparse in Antarctica, meaning that the
bathymetry of the ocean cavities beneath the ice shelves is just not known in
many places. The Bedmap2 sub-shelf bathymetry is mostly inherited from the
original BEDMAP data set <xref ref-type="bibr" rid="bib1.bibx36" id="paren.75"/> and is based on an
simple interpolation between the ice thickness at the grounding line and the
seabed near the ice-shelf front. This interpolation regularly spans
100 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>. Actual measurements from seismic soundings were limited to
Filchner–Ronne, Ross, Amery and the Larsen shelves. For the majority of the
ice shelves, this original bathymetry was kept in Bedmap2 but excavated by
20 <inline-formula><mml:math display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> in places where flotation was violated, as suggested by
<xref ref-type="bibr" rid="bib1.bibx35" id="text.76"/>. In the meantime,
<ext-link xlink:href="http://www.nasa.gov/mission_pages/icebridge/index.html#.VNyXksa8CWY">Operation
  Ice Bridge</ext-link> collected free-air gravimetry data, primarily in West
Antarctica, from which the bathymetry beneath entire shelves was inferred
<xref ref-type="bibr" rid="bib1.bibx58 bib1.bibx10" id="paren.77"/>. Large areas could be
covered with this airborne sensor. As the accuracy of this technique is low
for bathymetry <xref ref-type="bibr" rid="bib1.bibx9" id="paren.78"/>, on-site seismic
measurements should complement this data for the most prominent pinning
points.</p>
      <p>Finally, we want to acknowledge the many years and decades of data
acquisition on Antarctica, which are a prerequisite to this study. Data
compilation products for ice geometry and ice velocities are now available on
comparable resolution
<xref ref-type="bibr" rid="bib1.bibx40 bib1.bibx50 bib1.bibx14" id="paren.79"/>,
which triggered ice-sheet-wide assimilations necessary to determine poorly
constrained parameters in ice flow models
<xref ref-type="bibr" rid="bib1.bibx17 bib1.bibx41 bib1.bibx4" id="paren.80"><named-content content-type="pre">e.g.</named-content></xref>.
The data assimilation presented here has reached a quality such that it can
serve to identify inconsistencies in and between the velocity and geometry
data sets. As the optimisation primarily addresses velocity differences, our
assimilation reveals inhomogeneities in the surface velocity mosaic. However,
more importantly it points towards regions where observed ice flow is not
reconcilable with the geometric database. This is especially the case for
pinning points which can alter the dynamics of a larger area. Consequently,
ice flow models require the location and extent of these pinning areas as
input in order to be able to reproduce observed velocities. Only then could
realistic stress distributions be inferred, which would make it possible to
quantify the resistance that ice shelves exert on the upstream flow. For
reliable model projections of pinned ice shelves and their upstream
tributaries, the exact bathymetry of the bed contact is a prerequisite, as it
determines the timing of a potential future ungrounding.
This is exemplified by the TWG setup. Despite our good knowledge
on the spatial extent of this ice rise
<xref ref-type="bibr" rid="bib1.bibx47 bib1.bibx52" id="paren.81"/>, we have hardly any
information on how much it actually protrudes the ice shelf. For now, any
approach to model its future response is controversial to say the least. Once
the shelves become ungrounded, we expect a significant acceleration reaching
up to the grounded ice sheet and, consequently, a retreat of the grounding
line <xref ref-type="bibr" rid="bib1.bibx13" id="paren.82"/>. For TWG and many other glaciers in
the ASS, grounding lines often retreated
<xref ref-type="bibr" rid="bib1.bibx42 bib1.bibx52" id="paren.83"/> into deeper
bathymetry, which facilitates increasing ice export over the grounding line
<xref ref-type="bibr" rid="bib1.bibx55" id="paren.84"><named-content content-type="pre">e.g.</named-content></xref>. This provides a positive feedback on further
acceleration and retreat, often associated with an inherent instability of
the entire West Antarctic ice sheet
<xref ref-type="bibr" rid="bib1.bibx5 bib1.bibx28" id="paren.85"/>. In this light, we want
to put forward an appeal for a coordinated effort to produce
a contemporaneous high-resolution data set for ice geometry, ice dynamics and
sub-shelf bathymetry in this region. Additionally, observations on the exact
geometry of the pinning points, which are not in Bedmap2, are highly
anticipated by the model community, because these features can affect the
dynamics of entire ice shelves. Priority should be given to the pinning
points that give rise to a large velocity mismatch when not accounted for in
the presented data assimilation.</p>
</sec>

      
      </body>
    <back><ack><title>Acknowledgements</title><p>This study was funded by the French National Research Agency (ANR) under the
SUMER (Blanc SIMI 6) 2012 project referenced as ANR-12-BS06-0018. Results
presented in this publications are based on numerical simulation performed on
two platforms for scientific computing. Part of the simulations were
conducted using the Froggy platform of the
<ext-link xlink:href="https://ciment.ujf-grenoble.fr">CIMENT</ext-link> (Calcul Intensif/Modélisation/Expérimentation Numérique et Technologique)
infrastructure, which is supported by the Rhône-Alpes region (grant
<inline-formula><mml:math display="inline"><mml:mrow><mml:mi>C</mml:mi><mml:mi>P</mml:mi><mml:mi>E</mml:mi><mml:mi>R</mml:mi><mml:msub><mml:mn>07</mml:mn><mml:mn mathvariant="normal">1</mml:mn></mml:msub><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:math></inline-formula> <ext-link xlink:href="http://www.ci-ra.org/">CIRA</ext-link>), the OSUG@2020 labex
(reference ANR10 LABX56) and the Equip@Meso project (reference
ANR-10-EQPX-29-01) of the programme Investissements d'Avenir supervised by
the Agence Nationale pour la Recherche. The other part of the simulations
were conducted at the <ext-link xlink:href="https://www.cines.fr/">CINES</ext-link> (Centre
Informatique National de l'Enseignement Supérieur) computing centre
under allocation 2015-016066 from <ext-link xlink:href="http://www.genci.fr/fr">GENCI</ext-link> (Grand
Equipement National de Calcul Intensif). Results presented here also received
support and benefited from the development team at the
<ext-link xlink:href="https://www.csc.fi/en">CSC-IT</ext-link> Center for Science Ltd.
(Finland).<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?>
Edited by: G. H. Gudmundsson</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bibx1"><label>Armstrong et al.(1977)Armstrong, Roberts, and
Swithinbank</label><mixed-citation>
Armstrong, T., Roberts, B., and Swithinbank, C.: Proposed new terms and
definitions for snow and ice features, Polar Rec., 18, 501–502, 1977.</mixed-citation></ref>
      <ref id="bib1.bibx2"><label>Arndt et al.(2013)Arndt, Schenke, Jakobsson, Nitsche, Buys,
Goleby, Rebesco, Bohoyo, Hong, Black, Greku, Udintsev, Barrios,
Reynoso-Peralta, Taisei, and Wigley</label><mixed-citation>Arndt, J., Schenke, H., Jakobsson, M., Nitsche, F., Buys, G., Goleby, B.,
Rebesco, M., Bohoyo, F., Hong, J., Black, J., Greku, R., Udintsev, G.,
Barrios, F., Reynoso-Peralta, W., Taisei, M., and Wigley, R.: The
International Bathymetric Chart of the Southern Ocean (IBCSO) version 1.0: a
new bathymetric compilation covering circum-Antarctic waters, Geophys. Res.
Lett., 40, 3111–3117, <ext-link xlink:href="http://dx.doi.org/10.1002/grl.50413" ext-link-type="DOI">10.1002/grl.50413</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx3"><label>Arthern and
Gudmundsson(2010)</label><mixed-citation>Arthern, R. and Gudmundsson, G.: Initialization of ice-sheet forecasts viewed
as an inverse Robin problem, J. Glaciol., 56, 527–533,
<ext-link xlink:href="http://dx.doi.org/10.3189/002214310792447699" ext-link-type="DOI">10.3189/002214310792447699</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx4"><label>Arthern et al.(2015)Arthern, Hindmarsh, and
Wilams</label><mixed-citation>Arthern, R. J., Hindmarsh, R. C. A., and Wilams, C. R.: Initialization of
ice-sheet forecasts viewed as an inverse Robin problem, J. Geophys. Res.,
<ext-link xlink:href="http://dx.doi.org/10.1002/2014JF003239" ext-link-type="DOI">10.1002/2014JF003239</ext-link>, online first, 2015.</mixed-citation></ref>
      <ref id="bib1.bibx5"><label>Bamber et al.(2009)Bamber, Riva, Vermeersen, and
LeBrocq</label><mixed-citation>Bamber, J., Riva, R., Vermeersen, B., and LeBrocq, A.: Reassessment of the
potential sea-level rise from a collapse of the West Antarctic Ice Sheet,
Science, 324, 901–903, <ext-link xlink:href="http://dx.doi.org/10.1126/science.1169335" ext-link-type="DOI">10.1126/science.1169335</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx6"><label>Berthier et al.(2012)Berthier, Scambos, and
Shuman</label><mixed-citation>Berthier, E., Scambos, T., and Shuman, C.: Mass loss of Larsen B tributary
glaciers (Antarctic Peninsula) unabated since 2002, Geophys. Res. Lett., 39,
L13501, <ext-link xlink:href="http://dx.doi.org/10.1029/2012GL051755" ext-link-type="DOI">10.1029/2012GL051755</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx7"><label>Bindschadler et al.(2008)Bindschadler, Vornberger, Fleming,
Fox, Mullins, Binnie, Paulsen, Granneman, and
Gorodetzky</label><mixed-citation>Bindschadler, R., Vornberger, P., Fleming, A., Fox, A., Mullins, J., Binnie,
D., Paulsen, S., Granneman, B., and Gorodetzky, D.: The Landsat image mosaic
of Antarctica, Remote Sens. Environ., 112, 4214–4226,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.rse.2008.07.006" ext-link-type="DOI">10.1016/j.rse.2008.07.006</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx8"><label>Borstad et al.(2013)Borstad, Rignot, Mouginot, and
Schodlok</label><mixed-citation>Borstad, C. P., Rignot, E., Mouginot, J., and Schodlok, M. P.: Creep
deformation and buttressing capacity of damaged ice shelves: theory and
application to Larsen C ice shelf, The Cryosphere, 7, 1931–1947,
<ext-link xlink:href="http://dx.doi.org/10.5194/tc-7-1931-2013" ext-link-type="DOI">10.5194/tc-7-1931-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx9"><label>Brisbourne et al.(2014)Brisbourne, Smith, King, Nicholls,
Holland, and Makinson</label><mixed-citation>Brisbourne, A. M., Smith, A. M., King, E. C., Nicholls, K. W., Holland,
P. R., and Makinson, K.: Seabed topography beneath Larsen C Ice Shelf from
seismic soundings, The Cryosphere, 8, 1–13, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-8-1-2014" ext-link-type="DOI">10.5194/tc-8-1-2014</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx10"><label>Cochran and Bell(2012)</label><mixed-citation>Cochran, J. and Bell, R.: Inversion of IceBridge gravity data for continental
shelf bathymetry beneath the Larsen Ice Shelf, Antarctica, J. Glaciol., 58,
540–552, <ext-link xlink:href="http://dx.doi.org/10.3189/2012JoG11J033" ext-link-type="DOI">10.3189/2012JoG11J033</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx11"><label>Craven et al.(2009)Craven, Allison, Fricker, and
Warner</label><mixed-citation>
Craven, M., Allison, I., Fricker, H., and Warner, R.: Properties of a marine
ice layer under the Amery Ice Shelf, East Antarctica, J. Glaciol., 55,
717–728, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx12"><label>Depoorter et al.(2013)Depoorter, Bamber, Griggs, Lenaerts,
Ligtenberg, van den Broeke, and Moholdt</label><mixed-citation>Depoorter, M., Bamber, J., Griggs, J., Lenaerts, J., Ligtenberg, S., van den
Broeke, M., and Moholdt, G.: Calving fluxes and basal melt rates of Antarctic
ice shelves, Nature, 502, 89–93, <ext-link xlink:href="http://dx.doi.org/10.1038/nature12567" ext-link-type="DOI">10.1038/nature12567</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx13"><label>Favier et al.(2012)Favier, Gagliardini, Durand, and
Zwinger</label><mixed-citation>Favier, L., Gagliardini, O., Durand, G., and Zwinger, T.: A three-dimensional
full Stokes model of the grounding line dynamics: effect of a pinning point
beneath the ice shelf, The Cryosphere, 6, 101–112,
<ext-link xlink:href="http://dx.doi.org/10.5194/tc-6-101-2012" ext-link-type="DOI">10.5194/tc-6-101-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx14"><label>Fretwell et al.(2013)Fretwell, Pritchard, Vaughan, Bamber,
Barrand, Bell, Bianchi, Bingham, Blankenship, Casassa, Catania,
Callens, Conway, Cook, Corr, Damaske, Damm, Ferraccioli, Forsberg,
Fujita, Gim, Gogineni, Griggs, Hindmarsh, Holmlund, Holt, Jacobel,
Jenkins, Jokat, Jordan, King, Kohler, Krabill, Riger-Kusk,
Langley, Leitchenkov, Leuschen, Luyendyk, Matsuoka, Mouginot,
Nitsche, Nogi, Nost, Popov, Rignot, Rippin, Rivera, Roberts, Ross,
Siegert, Smith, Steinhage, Studinger, Sun, Tinto, Welch, Wilson,
Young, Xiangbin, and Zirizzotti</label><mixed-citation>Fretwell, P., Pritchard, H. D., Vaughan, D. G., Bamber, J. L., Barrand,
N. E., Bell, R., Bianchi, C., Bingham, R. G., Blankenship, D. D., Casassa,
G., Catania, G., Callens, D., Conway, H., Cook, A. J., Corr, H. F. J.,
Damaske, D., Damm, V., Ferraccioli, F., Forsberg, R., Fujita, S., Gim, Y.,
Gogineni, P., Griggs, J. A., Hindmarsh, R. C. A., Holmlund, P., Holt, J. W.,
Jacobel, R. W., Jenkins, A., Jokat, W., Jordan, T., King, E. C., Kohler, J.,
Krabill, W., Riger-Kusk, M., Langley, K. A., Leitchenkov, G., Leuschen, C.,
Luyendyk, B. P., Matsuoka, K., Mouginot, J., Nitsche, F. O., Nogi, Y., Nost,
O. A., Popov, S. V., Rignot, E., Rippin, D. M., Rivera, A., Roberts, J.,
Ross, N., Siegert, M. J., Smith, A. M., Steinhage, D., Studinger, M., Sun,
B., Tinto, B. K., Welch, B. C., Wilson, D., Young, D. A., Xiangbin, C., and
Zirizzotti, A.: Bedmap2: improved ice bed, surface and thickness datasets for
Antarctica, The Cryosphere, 7, 375–393, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-7-375-2013" ext-link-type="DOI">10.5194/tc-7-375-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx15"><label>Gagliardini and Zwinger(2008)</label><mixed-citation>Gagliardini, O. and Zwinger, T.: The ISMIP-HOM benchmark experiments
performed using the Finite-Element code Elmer, The Cryosphere, 2, 67–76,
<ext-link xlink:href="http://dx.doi.org/10.5194/tc-2-67-2008" ext-link-type="DOI">10.5194/tc-2-67-2008</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx16"><label>Gagliardini et al.(2013)Gagliardini, Zwinger,
Gillet-Chaulet, Durand, Favier, de Fleurian, Greve, Malinen,
Martín, Råback, Ruokolainen, Sacchettini, Schäfer, Seddik,
and Thies</label><mixed-citation>Gagliardini, O., Zwinger, T., Gillet-Chaulet, F., Durand, G., Favier, L.,
de Fleurian, B., Greve, R., Malinen, M., Martín, C., Råback, P.,
Ruokolainen, J., Sacchettini, M., Schäfer, M., Seddik, H., and Thies, J.:
Capabilities and performance of Elmer/Ice, a new-generation ice sheet model,
Geosci. Model Dev., 6, 1299–1318, <ext-link xlink:href="http://dx.doi.org/10.5194/gmd-6-1299-2013" ext-link-type="DOI">10.5194/gmd-6-1299-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx17"><label>Gillet-Chaulet et al.(2012)Gillet-Chaulet,
Gagliardini, Seddik, Nodet, Durand, Ritz, Zwinger, Greve, and
Vaughan</label><mixed-citation>Gillet-Chaulet, F., Gagliardini, O., Seddik, H., Nodet, M., Durand, G., Ritz,
C., Zwinger, T., Greve, R., and Vaughan, D. G.: Greenland ice sheet
contribution to sea-level rise from a new-generation ice-sheet model, The
Cryosphere, 6, 1561–1576, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-6-1561-2012" ext-link-type="DOI">10.5194/tc-6-1561-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx18"><label>Griggs and Bamber(2011)</label><mixed-citation>Griggs, J. and Bamber, J.: Antarctic ice-shelf thickness from satellite radar
altimetry, J. Glaciol., 57, 485–498, <ext-link xlink:href="http://dx.doi.org/10.3189/002214311796905659" ext-link-type="DOI">10.3189/002214311796905659</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx19"><label>Gudmundsson(2013)</label><mixed-citation>Gudmundsson, G. H.: Ice-shelf buttressing and the stability of marine ice
sheets, The Cryosphere, 7, 647–655, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-7-647-2013" ext-link-type="DOI">10.5194/tc-7-647-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx20"><label>Hansen(1992)</label><mixed-citation>Hansen, P.: Analysis of discrete ill-posed problems by means of the L-curve,
SIAM Rev., 34, 561–580, <ext-link xlink:href="http://dx.doi.org/10.1137/1034115" ext-link-type="DOI">10.1137/1034115</ext-link>, 1992.</mixed-citation></ref>
      <ref id="bib1.bibx21"><label>Hindmarsh(2006)</label><mixed-citation>Hindmarsh, R.: The role of membrane-like stresses in determining the
stability and sensitivity of the Antarctic ice sheets: back pressure and
grounding line motion, Philos. T. R. Soc. A, 364, 1733–1767,
<ext-link xlink:href="http://dx.doi.org/10.1098/rsta.2006.1797" ext-link-type="DOI">10.1098/rsta.2006.1797</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx22"><label>Holt et al.(2006)Holt, Blankenship, Morse, Young, Peters,
Kempf, Richter, Vaughan, and Corr</label><mixed-citation>Holt, J., Blankenship, D., Morse, D., Young, D., Peters, M., Kempf, S.,
Richter, T., Vaughan, D., and Corr, H.: New boundary conditions for the West
Antarctic Ice Sheet: subglacial topography of the Thwaites and Smith glacier
catchments, Geophys. Res. Lett., 33, L09502, <ext-link xlink:href="http://dx.doi.org/10.1029/2005GL025561" ext-link-type="DOI">10.1029/2005GL025561</ext-link>,
2006.</mixed-citation></ref>
      <ref id="bib1.bibx23"><label>Jansen et al.(2010)Jansen, Kulessa, Sammonds, Luckman,
King, and Glasser</label><mixed-citation>Jansen, D., Kulessa, B., Sammonds, P., Luckman, A., King, E., and Glasser,
N.: Present stability of the Larsen C Ice Shelf, Antarctic Peninsula, J.
Glaciol., 56, 593–600, <ext-link xlink:href="http://dx.doi.org/10.3189/002214310793146223" ext-link-type="DOI">10.3189/002214310793146223</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx24"><label>Jay-Allemand et al.(2011)Jay-Allemand, Gillet-Chaulet,
Gagliardini, and Nodet</label><mixed-citation>Jay-Allemand, M., Gillet-Chaulet, F., Gagliardini, O., and Nodet, M.:
Investigating changes in basal conditions of Variegated Glacier prior to and
during its 1982–1983 surge, The Cryosphere, 5, 659–672,
<ext-link xlink:href="http://dx.doi.org/10.5194/tc-5-659-2011" ext-link-type="DOI">10.5194/tc-5-659-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx25"><label>Jezek and RAMP Product Team(2002)</label><mixed-citation>
Jezek, K. and RAMP Product Team: RAMP AMM-1 SAR Image Mosaic of Antarctica.
Version 2, Alaska Satellite Facility, in association with the National Snow
and Ice Data Center, Boulder, CO, USA, 2002.</mixed-citation></ref>
      <ref id="bib1.bibx26"><label>Joughin(2002)</label><mixed-citation>Joughin, I.: Ice-sheet velocity mapping: a combined interferometric and
speckle-tracking approach, Ann. Glaciol., 34, 195–201,
<ext-link xlink:href="http://dx.doi.org/10.3189/172756402781817978" ext-link-type="DOI">10.3189/172756402781817978</ext-link>, 2002.</mixed-citation></ref>
      <ref id="bib1.bibx27"><label>Joughin et al.(2010)Joughin, Smith, and Holland</label><mixed-citation>Joughin, I., Smith, B., and Holland, D.: Sensitivity of 21st century sea
level to ocean-induced thinning of Pine Island Glacier, Antarctica, Geophys.
Res. Lett., 37, L20502, <ext-link xlink:href="http://dx.doi.org/10.1029/2010GL044819" ext-link-type="DOI">10.1029/2010GL044819</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx28"><label>Joughin et al.(2014)Joughin, Smith, and Medley</label><mixed-citation>Joughin, I., Smith, B., and Medley, B.: Marine ice sheet collapse potentially
under way for the Thwaites Glacier Basin, West Antarctica, Science, 344,
735–738, <ext-link xlink:href="http://dx.doi.org/10.1126/science.1249055" ext-link-type="DOI">10.1126/science.1249055</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx29"><label>Khazendar et al.(2007)Khazendar, Rignot, and
Larour</label><mixed-citation>Khazendar, A., Rignot, E., and Larour, E.: Larsen B Ice Shelf rheology
preceding its disintegration inferred by a control method, Geophys. Res.
Lett., 34, L19503, <ext-link xlink:href="http://dx.doi.org/10.1029/2007GL030980" ext-link-type="DOI">10.1029/2007GL030980</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx30"><label>Khazendar et al.(2009)Khazendar, Rignot, and
Larour</label><mixed-citation>Khazendar, A., Rignot, E., and Larour, E.: Roles of marine ice, rheology, and
fracture in the flow and stability of the Brunt/Stancomb-Wills Ice Shelf, J.
Geophys. Res., 114, F04007, <ext-link xlink:href="http://dx.doi.org/10.1029/2008JF001124" ext-link-type="DOI">10.1029/2008JF001124</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx31"><label>Khazendar et al.(2011)Khazendar, Rignot, and
Larour</label><mixed-citation>Khazendar, A., Rignot, E., and Larour, E.: Acceleration and spatial rheology
of Larsen C Ice Shelf, Antarctic Peninsula, Geophys. Res. Lett., 38, L09502,
<ext-link xlink:href="http://dx.doi.org/10.1029/2011GL046775" ext-link-type="DOI">10.1029/2011GL046775</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx32"><label>Kulessa et al.(2014)Kulessa, Jansen, Luckman, King, and
Sammonds</label><mixed-citation>Kulessa, B., Jansen, D., Luckman, A., King, E., and Sammonds, P.: Marine ice
regulates the future stability of a large Antarctic ice shelf, Nature
Communications, 5, 3707, <ext-link xlink:href="http://dx.doi.org/10.1038/ncomms4707" ext-link-type="DOI">10.1038/ncomms4707</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx33"><label>Larour et al.(2005)Larour, Rignot, Joughin, and
Aubry</label><mixed-citation>Larour, E., Rignot, E., Joughin, I., and Aubry, D.: Rheology of the Ronne Ice
Shelf, Antarctica, inferred from satellite radar interferometry data using an
inverse control method, Geophys. Res. Lett., 32, L05503,
<ext-link xlink:href="http://dx.doi.org/10.1029/2004GL021693" ext-link-type="DOI">10.1029/2004GL021693</ext-link>, 2005.</mixed-citation></ref>
      <ref id="bib1.bibx34"><label>Larour et al.(2014)Larour, Khazendar, Borstad, Seroussi,
Morlighem, and Rignot</label><mixed-citation>Larour, E., Khazendar, A., Borstad, C., Seroussi, H., Morlighem, M., and
Rignot, E.: Representation of sharp rifts and faults mechanics in modeling
ice shelf flow dynamics: application to Brunt/Stancomb-Wills Ice Shelf,
Antarctica, J. Geophys. Res., 119, 1918–1935, <ext-link xlink:href="http://dx.doi.org/10.1002/2014JF003157" ext-link-type="DOI">10.1002/2014JF003157</ext-link>,
2014.</mixed-citation></ref>
      <ref id="bib1.bibx35"><label>Le Brocq et al.(2010)Brocq, Payne, and
Vieli</label><mixed-citation>Le Brocq, A. M., Payne, A. J., and Vieli, A.: An improved Antarctic dataset
for high resolution numerical ice sheet models (ALBMAP v1), Earth Syst. Sci.
Data, 2, 247–260, <ext-link xlink:href="http://dx.doi.org/10.5194/essd-2-247-2010" ext-link-type="DOI">10.5194/essd-2-247-2010</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx36"><label>Lythe and Vaughan(2001)</label><mixed-citation>Lythe, M. B. and Vaughan, D. G.: BEDMAP: a new ice thickness and subglacial
topographic model of Antarctica, J. Geophys. Res., 106, 11335–11351,
<ext-link xlink:href="http://dx.doi.org/10.1029/2000JB900449" ext-link-type="DOI">10.1029/2000JB900449</ext-link>, 2001.</mixed-citation></ref>
      <ref id="bib1.bibx37"><label>MacAyeal(1989)</label><mixed-citation>MacAyeal, D.: Large-scale ice flow over a viscous basal sediment: theory and
application to ice stream B, Antarctica, J. Geophys. Res., 94, 4071–4087,
<ext-link xlink:href="http://dx.doi.org/10.1029/JB094iB04p04071" ext-link-type="DOI">10.1029/JB094iB04p04071</ext-link>, 1989.</mixed-citation></ref>
      <ref id="bib1.bibx38"><label>MacAyeal(1993)</label><mixed-citation>
MacAyeal, D.: A tutorial on the use of control methods in ice sheet
modelling, J. Glaciol., 39, 91–98, 1993.</mixed-citation></ref>
      <ref id="bib1.bibx39"><label>MacAyeal et al.(2003)</label><mixed-citation>MacAyeal, D., Scambos, T. A., Hulbe, C. L., and Fahnestock, M. A.:
Catastrophic ice-shelf break-up by an ice-shelf-fragment-capsize mechanism,
J. Glaciol., 49, 22–36, <ext-link xlink:href="http://dx.doi.org/10.3189/172756503781830863" ext-link-type="DOI">10.3189/172756503781830863</ext-link>, 2003.</mixed-citation></ref>
      <ref id="bib1.bibx40"><label>Morlighem et al.(2010)Morlighem, Rignot, Seroussi, Larour,
Ben Dhia, and Aubry</label><mixed-citation>Morlighem, M., Rignot, E., Seroussi, H., Larour, E., Ben Dhia, H., and Aubry,
D.: Spatial patterns of basal drag inferred using control methods from a
full-Stokes and simpler models for Pine Island Glacier, West Antarctica,
Geophys. Res. Lett., 37, L14502, <ext-link xlink:href="http://dx.doi.org/10.1029/2010GL043853" ext-link-type="DOI">10.1029/2010GL043853</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx41"><label>Morlighem et al.(2013)Morlighem, Seroussi, Larour, and
Rignot</label><mixed-citation>Morlighem, M., Seroussi, H., Larour, E., and Rignot, E.: Inversion of basal
friction in Antarctica using exact and incomplete adjoints of a higher-order
model, J. Geophys. Res., 118, 1746–1753, <ext-link xlink:href="http://dx.doi.org/10.1002/jgrf.20125" ext-link-type="DOI">10.1002/jgrf.20125</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx42"><label>Park et al.(2013)Park, Gourmelen, Shepherd, Kim,
Vaughan, and Wingham</label><mixed-citation>Park, J. W., Gourmelen, N., Shepherd, A., Kim, S. W., Vaughan, D. G., and
Wingham, D. J.: Sustained retreat of the Pine Island Glacier, Geophys. Res.
Lett., 40, 2137–2142, <ext-link xlink:href="http://dx.doi.org/10.1002/grl.50379" ext-link-type="DOI">10.1002/grl.50379</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx43"><label>Paterson(1994)</label><mixed-citation>
Paterson, W.: The Physics of Glaciers, Pergamon, Oxford, UK, 1994.</mixed-citation></ref>
      <ref id="bib1.bibx44"><label>Pattyn(2010)</label><mixed-citation>Pattyn, F.: Antarctic subglacial conditions inferred from a hybrid ice
sheet/ice stream model, Earth Planet. Sc. Lett., 295, 451–461,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.epsl.2010.04.025" ext-link-type="DOI">10.1016/j.epsl.2010.04.025</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bibx45"><label>Pritchard et al.(2009)Pritchard, Arthern, Vaughan, and
Edwards</label><mixed-citation>Pritchard, H., Arthern, R., Vaughan, D., and Edwards, L.: Extensive dynamic
thinning on the margins of the Greenland and Antarctic ice sheets, Nature,
461, 971–975, <ext-link xlink:href="http://dx.doi.org/10.1038/nature08471" ext-link-type="DOI">10.1038/nature08471</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bibx46"><label>Pritchard et al.(2012)Pritchard, Ligtenberg, Fricker, Vaughan,
van den Broeke, and Padman</label><mixed-citation>Pritchard, H., Ligtenberg, S., Fricker, H., Vaughan, D., van den Broeke, M.,
and Padman, L.: Antarctic ice-sheet loss driven by basal melting of ice
shelves, Nature, 484, 502–505, <ext-link xlink:href="http://dx.doi.org/10.1038/nature10968" ext-link-type="DOI">10.1038/nature10968</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx47"><label>Rignot(2001)</label><mixed-citation>Rignot, E.: Evidence for rapid retreat and mass loss of Thwaites Glacier,
West Antarctica, J. Glaciol., 47, 213–222, <ext-link xlink:href="http://dx.doi.org/10.3189/172756501781832340" ext-link-type="DOI">10.3189/172756501781832340</ext-link>,
2001.</mixed-citation></ref>
      <ref id="bib1.bibx48"><label>Rignot et al.(2008)Rignot, Bamber, van den Broeke, Davis,
Li, van de Berg, and van Meijgaard</label><mixed-citation>Rignot, E., Bamber, J., van den Broeke, M., Davis, C., Li, Y., van de Berg,
W., and van Meijgaard, E.: Recent Antarctic ice mass loss from radar
interferometry and regional climate modelling, Nat. Geosci., 1, 106–110,
<ext-link xlink:href="http://dx.doi.org/10.1038/ngeo102" ext-link-type="DOI">10.1038/ngeo102</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx49"><label>Rignot et al.(2011a)Rignot, Mouginot, and Scheuchl</label><mixed-citation>Rignot, E., Mouginot, J., and Scheuchl, B.: Antarctic grounding line mapping
from differential satellite radar interferometry, Geophys. Res. Lett., 38,
L10504, <ext-link xlink:href="http://dx.doi.org/10.1029/2011GL047109" ext-link-type="DOI">10.1029/2011GL047109</ext-link>, 2011a.</mixed-citation></ref>
      <ref id="bib1.bibx50"><label>Rignot et al.(2011b)Rignot, Mouginot, and Scheuchl</label><mixed-citation>Rignot, E., Mouginot, J., and Scheuchl, B.: Ice flow of the Antarctic Ice
Sheet, Science, 333, 1427–1430, <ext-link xlink:href="http://dx.doi.org/10.1126/science.1208336" ext-link-type="DOI">10.1126/science.1208336</ext-link>, 2011b.</mixed-citation></ref>
      <ref id="bib1.bibx51"><label>Rignot et al.(2013)Rignot, Jacobs, Mouginot, and
Scheuchl</label><mixed-citation>Rignot, E., Jacobs, S., Mouginot, J., and Scheuchl, B.: Ice-shelf melting
around Antarctica, Science, 341, 266–270, <ext-link xlink:href="http://dx.doi.org/10.1126/science.1235798" ext-link-type="DOI">10.1126/science.1235798</ext-link>,
2013.</mixed-citation></ref>
      <ref id="bib1.bibx52"><label>Rignot et al.(2014)Rignot, Mouginot, Morlighem, Seroussi,
and Scheuchl</label><mixed-citation>Rignot, E., Mouginot, J., Morlighem, M., Seroussi, H., and Scheuchl, B.:
Widespread, rapid grounding line retreat of Pine Island, Thwaites, Smith, and
Kohler glaciers, West Antarctica, from 1992 to 2011, Geophys. Res. Lett., 41,
3502–3509, <ext-link xlink:href="http://dx.doi.org/10.1002/2014GL060140" ext-link-type="DOI">10.1002/2014GL060140</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bibx53"><label>Rott et al.(2011)Rott, Müller, Nagler, and
Floricioiu</label><mixed-citation>Rott, H., Müller, F., Nagler, T., and Floricioiu, D.: The imbalance of
glaciers after disintegration of Larsen-B ice shelf, Antarctic Peninsula, The
Cryosphere, 5, 125–134, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-5-125-2011" ext-link-type="DOI">10.5194/tc-5-125-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bibx54"><label>Scambos et al.(2004)Scambos, Bohlander, Shuman, and
Skvarca</label><mixed-citation>Scambos, T., Bohlander, J., Shuman, C., and Skvarca, P.: Glacier acceleration
and thinning after ice shelf collapse in the Larsen B embayment, Antarctica,
Geophys. Res. Lett., 31, L18402, <ext-link xlink:href="http://dx.doi.org/10.1029/2004GL020670" ext-link-type="DOI">10.1029/2004GL020670</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bibx55"><label>Schoof(2007)</label><mixed-citation>Schoof, C.: Ice sheet grounding line dynamics: steady states, stability, and
hysteresis, J. Geophys. Res., 112, F03S28, <ext-link xlink:href="http://dx.doi.org/10.1029/2006JF000664" ext-link-type="DOI">10.1029/2006JF000664</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bibx56"><label>Shepherd et al.(2012)Shepherd, Ivins, Geruo, Barletta,
Bentley, Bettadpur, Briggs, Bromwich, Forsberg, Galin, Horwath,
Jacobs, Joughin, King, Lenaerts, Li, Ligtenberg, Luckman, Luthcke,
McMillan, Meister, Milne, Mouginot, Muir, Nicolas, Paden, Payne,
Pritchard, Rignot, Rott, Sørensen, Scambos, Scheuchl, Schrama,
Smith, Sundal, van Angelen, van de Berg, van den Broeke,
Vaughan, Velicogna, Wahr, Whitehouse, Wingham, Yi, Young, and
Zwally</label><mixed-citation>Shepherd, A., Ivins, E., Geruo, A., Barletta, V., Bentley, M., Bettadpur, S.,
Briggs, K., Bromwich, D., Forsberg, R., Galin, N., Horwath, M., Jacobs, S.,
Joughin, I., King, M., Lenaerts, J., Li, J., Ligtenberg, S., Luckman, A.,
Luthcke, S., McMillan, M., Meister, R., Milne, G., Mouginot, J., Muir, A.,
Nicolas, J., Paden, J., Payne, A., Pritchard, H., Rignot, E., Rott, H.,
Sørensen, L., Scambos, T., Scheuchl, B., Schrama, E., Smith, B., Sundal,
A., van Angelen, J., van de Berg, W., van den Broeke, M., Vaughan, D.,
Velicogna, I., Wahr, J., Whitehouse, P., Wingham, D., Yi, D., Young, D., and
Zwally, H.: A reconciled estimate of ice-sheet mass balance, Science, 338,
1183–1189, <ext-link xlink:href="http://dx.doi.org/10.1126/science.1228102" ext-link-type="DOI">10.1126/science.1228102</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bibx57"><label>Thomas(1979)</label><mixed-citation>
Thomas, R.: Ice shelves: a review, J. Glaciol., 24, 273–286, 1979.</mixed-citation></ref>
      <ref id="bib1.bibx58"><label>Tinto and Bell(2011)</label><mixed-citation>Tinto, K. and Bell, R.: Progressive unpinning of Thwaites Glacier from newly
identified offshore ridge: constraints from aerogravity, Geophys. Res. Lett.,
38, L20503, <ext-link xlink:href="http://dx.doi.org/10.1029/2011GL049026" ext-link-type="DOI">10.1029/2011GL049026</ext-link>, 2011.
</mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bibx59"><label>van den Broeke(2008)</label><mixed-citation>van den Broeke, M.: Depth and Density of the Antarctic Firn Layer, Arct.
Antarct. Alp. Res., 40, 432–438,
<ext-link xlink:href="http://dx.doi.org/10.1657/1523-0430(07-021)[BROEKE]2.0.CO;2" ext-link-type="DOI">10.1657/1523-0430(07-021)[BROEKE]2.0.CO;2</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bibx60"><label>Van Der Veen(1999)</label><mixed-citation>
Van Der Veen, C.: Fundamentals of Glacier Dynamics, Taylor &amp; Francis,
Rotterdam, the Netherlands, 1999.</mixed-citation></ref>
      <ref id="bib1.bibx61"><label>Van Liefferinge and Pattyn(2013)</label><mixed-citation>Van Liefferinge, B. and Pattyn, F.: Using ice-flow models to evaluate
potential sites of million year-old ice in Antarctica, Clim. Past, 9,
2335–2345, <ext-link xlink:href="http://dx.doi.org/10.5194/cp-9-2335-2013" ext-link-type="DOI">10.5194/cp-9-2335-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bibx62"><label>Vaughan et al.(2006)Vaughan, Corr, Ferraccioli, Frearson,
O'Hare, Mach, Holt, Blankenship, Morse, and Young</label><mixed-citation>Vaughan, D., Corr, H., Ferraccioli, F., Frearson, N., O'Hare, A., Mach, D.,
Holt, J., Blankenship, D., Morse, D., and Young, D.: New boundary conditions
for the West Antarctic ice sheet: subglacial topography beneath Pine Island
Glacier, Geophys. Res. Lett., 33, L09501, <ext-link xlink:href="http://dx.doi.org/10.1029/2005GL025588" ext-link-type="DOI">10.1029/2005GL025588</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx63"><label>Vieli et al.(2006)Vieli, Payne, Du, and Shepherd</label><mixed-citation>Vieli, A., Payne, A., Du, Z., and Shepherd, A.: Numerical modelling and data
assimilation of the Larsen B ice shelf, Antarctic Peninsula, Philos. T. R.
Soc. A, 364, 1815–1839, <ext-link xlink:href="http://dx.doi.org/10.1098/rsta.2006.1800" ext-link-type="DOI">10.1098/rsta.2006.1800</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bibx64"><label>Vieli et al.(2007)Vieli, Payne, Shepherd, and Du</label><mixed-citation>Vieli, A., Payne, A., Shepherd, A., and Du, Z.: Causes of pre-collapse
changes of the Larsen B Ice Shelf: numerical modelling and assimilation of
satellite observations, Earth Planet. Sc. Lett., 259, 297–306,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.epsl.2007.04.050" ext-link-type="DOI">10.1016/j.epsl.2007.04.050</ext-link>, 2007.</mixed-citation></ref>

  </ref-list><app-group content-type="float"><app><title/>

    </app></app-group></back>
    </article>
