<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" dtd-version="3.0"><?xmltex \makeatother\@nolinetrue\makeatletter?>
  <front>
    <journal-meta>
<journal-id journal-id-type="publisher">TC</journal-id>
<journal-title-group>
<journal-title>The Cryosphere</journal-title>
<abbrev-journal-title abbrev-type="publisher">TC</abbrev-journal-title>
<abbrev-journal-title abbrev-type="nlm-ta">The Cryosphere</abbrev-journal-title>
</journal-title-group>
<issn pub-type="epub">1994-0424</issn>
<publisher><publisher-name>Copernicus Publications</publisher-name>
<publisher-loc>Göttingen, Germany</publisher-loc>
</publisher>
</journal-meta>

    <article-meta>
      <article-id pub-id-type="doi">10.5194/tc-11-841-2017</article-id><title-group><article-title>Internal structure of two alpine rock glaciers investigated by quasi-3-D electrical resistivity imaging</article-title>
      </title-group><?xmltex \runningtitle{Internal structure of two alpine rock glaciers}?><?xmltex \runningauthor{A.~Emmert and C.~Kneisel}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>Emmert</surname><given-names>Adrian</given-names></name>
          <email>adrian.emmert@uni-wuerzburg.de</email>
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Kneisel</surname><given-names>Christof</given-names></name>
          
        </contrib>
        <aff id="aff1"><institution>Institute of Geography and Geology, University of Würzburg, 97074, Germany</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">Adrian Emmert (adrian.emmert@uni-wuerzburg.de)</corresp></author-notes><pub-date><day>30</day><month>March</month><year>2017</year></pub-date>
      
      <volume>11</volume>
      <issue>2</issue>
      <fpage>841</fpage><lpage>855</lpage>
      <history>
        <date date-type="received"><day>31</day><month>May</month><year>2016</year></date>
           <date date-type="rev-request"><day>4</day><month>July</month><year>2016</year></date>
           <date date-type="rev-recd"><day>30</day><month>November</month><year>2016</year></date>
           <date date-type="accepted"><day>2</day><month>December</month><year>2016</year></date>
      </history>
      <permissions>
<license license-type="open-access">
<license-p>This work is licensed under a Creative Commons Attribution 3.0 Unported License. To view a copy of this license, visit <ext-link ext-link-type="uri" xlink:href="http://creativecommons.org/licenses/by/3.0/">http://creativecommons.org/licenses/by/3.0/</ext-link></license-p>
</license>
</permissions><self-uri xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017.html">This article is available from https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017.html</self-uri>
<self-uri xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017.pdf">The full text article is available as a PDF file from https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017.pdf</self-uri>


      <abstract>
    <p>Interactions between different formative processes are reflected in the
internal structure of rock glaciers. Therefore, the detection of subsurface
conditions can help to enhance our understanding of landform development. For
an assessment of subsurface conditions, we present an analysis of the spatial
variability of active layer thickness, ground ice content and frost table
topography for two different rock glaciers in the Eastern Swiss Alps by means
of quasi-3-D electrical resistivity imaging (ERI). This approach enables an
extensive mapping of subsurface structures and a spatial overlay between
site-specific surface and subsurface characteristics. At Nair rock glacier,
we discovered a gradual descent of the frost table in a downslope direction
and a constant decrease of ice content which follows the observed surface
topography. This is attributed to ice formation by refreezing meltwater from
an embedded snow bank or from a subsurface ice patch which reshapes the
permafrost layer. The heterogeneous ground ice distribution at Uertsch rock
glacier indicates that multiple processes on different time domains were
involved in the development. Resistivity values which represent frozen
conditions vary within a wide range and indicate a successive formation which
includes several advances, past glacial overrides and creep processes on the
rock glacier surface. In combination with the observed topography, quasi-3-D
ERI enables us to delimit areas of extensive and compressive flow in close
proximity. Excellent data quality was provided by a good coupling of
electrodes to the ground in the pebbly material of the investigated rock
glaciers. Results show the value of the quasi-3-D ERI approach but advise the
application of complementary geophysical methods for interpreting the
results.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

      <?xmltex \hack{\newpage}?>
<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p>In areas of sporadic and discontinuous permafrost, subsurface
conditions (e.g. thickness of the active layer, frost table topography, ice
content) can be highly heterogeneous within small distances and can vary
within single landform units (Schneider et al., 2013; Langston et al., 2011;
Scapozza et al., 2011; Kneisel, 2010a). This is due to complex interactions
between small-scale surface conditions (e.g. grain size composition, snow
cover distribution), topographical attributes (e.g. aspect, slope) and
characteristics of the contributing area (e.g. source of debris, extent of
root zone) (see Monnier et al., 2013; Luetschg et al., 2004; Hanson and
Hoelzle, 2004; Harris and Pedersen, 1998) which influence the local ground
thermal regime during landform formation (Otto et al., 2012; Lambiel and
Pieracci, 2008). For a better understanding of the past and future
development of periglacial landforms in areas of sporadic and discontinuous
permafrost, which are particularly sensitive to climate change (Schneider et
al., 2012; Harris et al., 2009), an enhanced knowledge of these interactions
is needed. The detection and mapping of spatial variations within the
internal structure can be seen as a first step towards an identification of
linkages between surface and subsurface processes, which are key drivers in
landform development (Kääb et al., 2007; Haeberli et al., 2006). This
spatial information can be valuable in combination with thermal modelling or
process modelling approaches (Frehner et al., 2015; Scherler et al., 2013;
Luetschg et al., 2008) which are, due to the heterogeneous subsurface
conditions in alpine environments, often reduced to one or two dimensions.
Hence, a detailed knowledge of three-dimensional subsurface conditions
can support the interpretation of results from such models.</p>
      <p><?xmltex \hack{\newpage}?>Geophysical techniques such as electrical resistivity tomography (ERT),
seismic refraction tomography (SRT) or ground-penetrating radar (GPR) are
widely used today and provide a multi-dimensional investigation of
subsurface conditions in permafrost environments and corresponding
landforms. For rock glaciers and similar periglacial landforms, geophysical
investigations enable an assessment of the subsurface material composition
and to distinguish between frozen and unfrozen areas (e.g. Schneider et
al., 2013; Musil et al., 2006). This information can be used to investigate
inferences with creep velocities (Hausmann et al., 2012; Kneisel and
Kääb, 2007) or to reveal glacier–permafrost interactions during the
development of rock glaciers (see Dusik et al., 2015; Krainer et al., 2012;
Ribolini et al., 2010).</p>
      <p>In contrast to those numerous one- or two-dimensional field studies, in which
vertical and lateral variations of resistivity distribution could be
detected, three-dimensional investigations are sparse in the field of
periglacial geomorphology. Approaches were presented by Scapozza and Laigre
(2014) and Langston et al. (2011), who graphically combined results from 2-D
ERT surveys to three-dimensional fence diagrams. However, these approaches do
not take into account the actual three-dimensionality of the subsurface
resistivity distribution and the so-called “3-D effects”, which result from
small-scale heterogeneities (Loke et al., 2013). This is achieved by running
a 3-D inversion on a data set consisting of multiple intersecting 2-D data sets
(“quasi-3-D” approach), which enables a horizontal mapping of resistivity
variations, an assessment of the geometry of the detected structures and
consequently a more realistic characterisation of three-dimensional
subsurface conditions (Kneisel et al., 2014; Rödder and Kneisel, 2012).</p>
      <p>The objective of this paper is to describe the internal structure of two
morphologically different rock glaciers with regard to frost table variations,
active layer thickness (ALT), ice content and ground ice genesis. We
therefore analyse the three-dimensional subsurface resistivity distribution
which is modelled by quasi-3-D electrical resistivity imaging (ERI) and the results from additionally performed
comparative surveys of 2-D ERT and 2-D SRT. Ground truthing is achieved by
borehole temperature measurements. We present a qualitative assessment of
ground ice content which we presume is sufficient for interpreting the
results regarding rock glacier development. Quantitative assessments, as
presented e.g. by Pellet et al. (2016), Hausmann et al. (2012) or Hauck et
al. (2011), would additionally require a spatial assessment of porosity.</p>
</sec>
<sec id="Ch1.S2">
  <title>Study sites</title>
      <p>The investigated rock glaciers are located in the Eastern Swiss Alps, an area
which is well known for the occurrence of permafrost and numerous
rock glaciers. The nearby rock glaciers Murtèl and Muragl probably belong
to the best investigated rock glaciers in the European Alps (e.g. Maurer and
Hauck, 2007). For the presented study, two landforms described as “pebbly
rock glaciers” according to the relatively small grain size (dominant clast
size <inline-formula><mml:math id="M1" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 20 <inline-formula><mml:math id="M2" display="inline"><mml:mi mathvariant="normal">cm</mml:mi></mml:math></inline-formula>) of the surface debris (Matsuoka et al., 2005) were
chosen. The distance between the two sites is ca. 12 <inline-formula><mml:math id="M3" display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula>. In September
2014, one borehole with a depth of 10 <inline-formula><mml:math id="M4" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> was drilled at Uertsch
rock glacier and one borehole with the same depth was drilled at Nair
rock glacier. Both boreholes are instrumented with thermistor strings with
15 temperature sensors. The temperature sensors are located at the ground
surface and 0.2, 0.4, 0.8, 1.2, 1.6, 2, 3, 4, 5, 6, 7, 8, 9 and 10 <inline-formula><mml:math id="M5" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
below the surface. As a destructive drilling method was applied, no borehole
cores are available. Accuracy of the installed sensor type (Dallas,
Geoprecision) is <inline-formula><mml:math id="M6" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>0.25 <inline-formula><mml:math id="M7" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C and a temporal resolution of
1 <inline-formula><mml:math id="M8" display="inline"><mml:mi mathvariant="normal">h</mml:mi></mml:math></inline-formula> is provided.</p>
<sec id="Ch1.S2.SS1">
  <title>Nair rock glacier</title>
      <p>Nair rock glacier (46<inline-formula><mml:math id="M9" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>31<inline-formula><mml:math id="M10" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula> N, 9<inline-formula><mml:math id="M11" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>47<inline-formula><mml:math id="M12" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula> E; ca.
2845–2820 <inline-formula><mml:math id="M13" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> a.s.l.; Fig. 1a) is located at the southern slope of a
small high mountain valley near the city of Celerina, Upper Engadine. It is
part of a widespread rock glacier assembly at the valley slope and roots below
a steep talus cone (Figs. 1a, 2a). It is composed of debris material from the
sedimentary rocks of the Piz Nair summit area (mainly schist and marlstone).
The Alpine Permafrost Index Map (Boeckli et al., 2012) describes the spatial
distribution of permafrost in the area of the rock glacier as “permafrost in
nearly all conditions”. The investigated rock glacier consists of several
adjacent lobes, but our study concentrates on the uppermost eastern lobe,
which is about <inline-formula><mml:math id="M14" display="inline"><mml:mrow><mml:mn mathvariant="normal">90</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">80</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in size. The occurrence of
permanently frozen ground within this part of the rock glacier was reported by
Ikeda and Matsuoka (2006), who performed a seismic refraction sounding and one
2-D ERT measurement (specified therein as NN12). Their study describes the
rock glacier as “active”, but no flow velocity measurements were published.
A glaciation of the site during Little Ice Age (LIA) is not indicated by
morphological traces but surface ice is displayed on ancient topographical
maps from ca. 1917 to 1944 at the position of the present talus cones and at
the root zone of the rock glacier (Coaz et al., 1925, 1946).</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1"><caption><p>Site overview and measurement set-ups: <bold>(a)</bold> photo of Nair site;
<bold>(b, c)</bold> photos of Uertsch site; <bold>(d)</bold> quasi-3-D ERI set-up at Nair;
<bold>(e)</bold> quasi-3-D ERI set-up at Uertsch_01 (blue lines) and Uertsch_02
(red lines).</p></caption>
          <?xmltex \igopts{width=236.157874pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f01.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2" specific-use="star"><caption><p>Geomorphological setting: <bold>(a, b)</bold> Nair and <bold>(c, d)</bold>
Uertsch. Legend adapted from Kneisel et al. (1998).</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f02.png"/>

        </fig>

</sec>
<sec id="Ch1.S2.SS2">
  <title>Uertsch rock glacier</title>
      <p>Uertsch rock glacier (46<inline-formula><mml:math id="M15" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>36<inline-formula><mml:math id="M16" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula> N, 9<inline-formula><mml:math id="M17" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>51<inline-formula><mml:math id="M18" display="inline"><mml:msup><mml:mi/><mml:mo>′</mml:mo></mml:msup></mml:math></inline-formula> E; ca.
2570–2434 <inline-formula><mml:math id="M19" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> a.s.l.; Fig. 1b, c) is located at the head of a
north-striking valley near the city of Bergün, ca. 2 <inline-formula><mml:math id="M20" display="inline"><mml:mi mathvariant="normal">km</mml:mi></mml:math></inline-formula> north of
Albula Pass. It is tongue-shaped and about <inline-formula><mml:math id="M21" display="inline"><mml:mrow><mml:mn mathvariant="normal">500</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">100</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in size. It has a marked topography with arcuate ridges
contoured by deep furrows (vertical difference ca. 0.5–3 <inline-formula><mml:math id="M22" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, Fig. 2d)
at the rock glacier snout. A several metres high lateral moraine at the
western edge of the rock glacier next to a partly ice-filled depression
(<inline-formula><mml:math id="M23" display="inline"><mml:mrow><mml:mn mathvariant="normal">80</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">40</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>) at its proximal side indicates that an
extensive glaciation existed on the rock glacier (Fig. 2c). Surface ice is
displayed on a topographical map from 1878, but pictured there only slightly
larger than the extent of the recent ice patch (Coaz and Leuzinger, 1878). A
similar lateral moraine is lacking at the eastern edge. Small longitudinal
ridges occur in the central part of the rock glacier and several relict lobes
in front of the rock glacier indicate a successive formation (Figs. 1c, 2c).
On the surface, isolated pioneer plants indicate inactivity. The rock glacier
mostly consists of fine-grained schist from the mountain ridge between Piz
Üertsch and Piz Blaisun. The rooting zone is part of a wide
amphitheatre-like catchment area, where remnant ice from a former glaciation
and lateral moraines from the former glacier extent are visible (Figs. 1c,
2c). However, this part is a little cut off from the root zone of the
rock glacier. The Alpine Permafrost Index Map (Boeckli et al., 2012) describes
the occurrence of permafrost at the main part of the rock glacier as
“permafrost only in very favourable conditions”. Only the area of the
rooting zone of the rock glacier is described by the term “permafrost mostly
in cold conditions”. The borehole is located in the lower part of the
rock glacier, situated at the edge of one of the surface ridges. Some
morphometrical attributes (e.g. length, slope aspect, lithology) of the
rock glacier were presented by Ikeda and Matsuoka (2006) (specified therein as
A8), but no geophysical surveys were published.</p>
</sec>
</sec>
<sec id="Ch1.S3">
  <title>Methods</title>
      <p>The application of geophysical measurements for the detection of subsurface
conditions is common practice in permafrost research (e.g. Hauck, 2013;
Kneisel et al., 2008; Otto and Sass, 2006) and therefore only short
descriptions of the basic approaches are given here. As the ranges of
resistivity values for frozen and unfrozen conditions are partly overlapping,
the application of complementary methods for the detection of frozen
subsurface conditions is generally recommended (Schrott and Sass, 2008;
Ikeda, 2006).</p>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1" specific-use="star"><caption><p>Details on quasi-3-D ERI surveys.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="4">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:colspec colnum="3" colname="col3" align="left"/>
     <oasis:colspec colnum="4" colname="col4" align="left"/>
     <oasis:thead>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">NAIR</oasis:entry>  
         <oasis:entry colname="col3">UERTSCH_01</oasis:entry>  
         <oasis:entry colname="col4">UERTSCH_02</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">Acquisition dates</oasis:entry>  
         <oasis:entry colname="col2">12–14 August 2014</oasis:entry>  
         <oasis:entry colname="col3">11–13 September 2014</oasis:entry>  
         <oasis:entry colname="col4">26–31 July 2015</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Number of grid lines</oasis:entry>  
         <oasis:entry colname="col2">17 (9 <inline-formula><mml:math id="M24" display="inline"><mml:mi>X</mml:mi></mml:math></inline-formula>, 8 <inline-formula><mml:math id="M25" display="inline"><mml:mi>Y</mml:mi></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col3">17 (9 <inline-formula><mml:math id="M26" display="inline"><mml:mi>X</mml:mi></mml:math></inline-formula>, 8 <inline-formula><mml:math id="M27" display="inline"><mml:mi>Y</mml:mi></mml:math></inline-formula>)</oasis:entry>  
         <oasis:entry colname="col4">30 (17 <inline-formula><mml:math id="M28" display="inline"><mml:mi>X</mml:mi></mml:math></inline-formula>, 13 <inline-formula><mml:math id="M29" display="inline"><mml:mi>Y</mml:mi></mml:math></inline-formula>)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Outline of investigated area</oasis:entry>  
         <oasis:entry colname="col2"><inline-formula><mml:math id="M30" display="inline"><mml:mrow><mml:mn mathvariant="normal">70</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">105</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col3"><inline-formula><mml:math id="M31" display="inline"><mml:mrow><mml:mn mathvariant="normal">70</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">105</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col4"><inline-formula><mml:math id="M32" display="inline"><mml:mrow><mml:mn mathvariant="normal">74</mml:mn><mml:mspace linebreak="nobreak" width="0.125em"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">105</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Number of collated 2-D profiles</oasis:entry>  
         <oasis:entry colname="col2">17</oasis:entry>  
         <oasis:entry colname="col3">20</oasis:entry>  
         <oasis:entry colname="col4">60</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Array types for 2-D profiles</oasis:entry>  
         <oasis:entry colname="col2">17 DipDip</oasis:entry>  
         <oasis:entry colname="col3">17 DipDip <inline-formula><mml:math id="M33" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> 3 WenSl</oasis:entry>  
         <oasis:entry colname="col4">30 DipDip <inline-formula><mml:math id="M34" display="inline"><mml:mo>+</mml:mo></mml:math></inline-formula> 30 WenSl</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Number of data points for inversion</oasis:entry>  
         <oasis:entry colname="col2">6294 (of max. 6936)</oasis:entry>  
         <oasis:entry colname="col3">7372 (of max. 7800)</oasis:entry>  
         <oasis:entry colname="col4">20 523 (of max. 20 880)</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">Absolute error (iteration)</oasis:entry>  
         <oasis:entry colname="col2">7.77 (5)</oasis:entry>  
         <oasis:entry colname="col3">5.85 (5)</oasis:entry>  
         <oasis:entry colname="col4">8.86 (5)</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<sec id="Ch1.S3.SS1">
  <title>Electrical resistivity tomography and quasi-3-D electrical
resistivity imaging</title>
      <p>Geoelectrical measurements are based on the varying electrical conductivity
of different materials (e.g. minerals, sediments, air and water), which are
assumed to be heterogeneously distributed within the subsurface. Hence, the
detection of potential difference patterns can be used to derive information
on the geometry of structural heterogeneities and their electrical
properties. The wide range of resistivity values for most loose materials is
caused by their porosity, the varying water content and its state of matter.
This connection allows us to convert the image of resistivity distribution into
an image of subsurface conditions. Resistivity measurements are carried out
by injecting direct current into the ground via two current electrodes. Two
potential electrodes are then used to measure the resulting voltage
difference. The arrangement of these four electrodes is described by the
“electrode array”, which determines investigation depth and sensitivity
pattern of the measurement. For the quasi-3-D ERI approach (see Kneisel et
al., 2014, for more details) data points from a 2-D network of parallel and
perpendicular survey lines are merged and treated as one 3-D data set. Each of
our 2-D profiles uses 36 electrodes, connected to a multi-electrode
resistivity imaging system (Syscal Pro, IRIS Instruments). Inter-line
electrode spacings of 2 and 3 <inline-formula><mml:math id="M35" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> were used for profile lines in <inline-formula><mml:math id="M36" display="inline"><mml:mi>x</mml:mi></mml:math></inline-formula>
and <inline-formula><mml:math id="M37" display="inline"><mml:mi>y</mml:mi></mml:math></inline-formula> direction, respectively. Each datum point was measured between two
and four times and standard deviation between these reciprocal measurements
was saved for quality checks. Further specifications of the quasi-3-D ERI data
sets of this study are summarised in Table 1 and the networks of 2-D lines are
presented in Fig. 1d, e. Dipole–dipole (DipDip) electrode array was
performed preferably due to its high resolution in the shallow subsurface and
the provided time efficiency by our multi-channel device, but also
measurements with the more robust Wenner–Schlumberger (WenSl) array were
performed at all sites (and partly included into the 3-D data sets) to reach a
higher level of reliability. Where no complete rectangular-shaped grid could
be set up due to topographical reasons, the model sections are partly blanked
out. The measured apparent resistivity data sets were quality checked and bad
datum points (standard deviation between reciprocal measurements
<inline-formula><mml:math id="M38" display="inline"><mml:mo>&gt;</mml:mo></mml:math></inline-formula> 5 %) were deleted manually. The measured 2-D data sets were inverted
independently for 2-D interpretation and further quality checks following the
procedures proposed by Loke (2014) were performed. This includes an
elimination of datum points with root mean square errors of <inline-formula><mml:math id="M39" display="inline"><mml:mo>&gt;</mml:mo></mml:math></inline-formula> 100 % in a trial
inversion. The 2-D data sets were merged into one single 3-D file using the
software RES2DINVx64 (Geotomo Software). Topography (see Fig. 8) was measured
at each electrode using an RTK-GNSS system (Uertsch_02) or estimated
visually in the field (Nair, Uertsch_01). The estimated topography data
sets were corrected afterwards using digital elevation data. Topography was
incorporated into the merged 3-D data sets, which were inverted using the
software RES3DINVx64 Professional (Geotomo Software). We used the robust
inversion scheme (L1-norm) for the smoothness-constrained regularisation,
which tends to produce models with sharp boundaries (Loke and Barker, 1996).
The optimisation method tries to reduce the absolute difference between the
calculated and the measured apparent resistivity values by adjusting the
resistivity of the model blocks. These differences are quantified as a mean
absolute misfit error value (absolute error). The inversion continues until
acceptable convergence between the calculated and the measured data is
reached (see Rödder and Kneisel, 2012, for more details on inversion
settings). To investigate model reliability, a resolution matrix approach
(Hilbich et al., 2009; Wilkinson et al., 2006; Stummer et al., 2004) was
performed on all data sets. This approach provides a measure of the
information content of the model cells. It enables an assessment of the
independence of the modelled resistivity values from neighbouring cells or
inversion settings. We also used the approach to evaluate investigation
depth. In RES3DINV, the model resolution values are transferred into index
values, which additionally take into account the model discretization (Loke,
2015). We followed the suggested index value of 10 as a lower limit to rate
model cells as sufficiently resolved. For the conversion from resistivity
values to subsurface conditions, we applied qualitative attributions based on
direct observations by Ikeda and Matsuoka (2006) as their study was performed
in the same area, as well as appraisals from our own borehole measurements.</p>
</sec>
<sec id="Ch1.S3.SS2">
  <title>Seismic refraction tomography</title>
      <p>SRT is a suitable complementary method to
geoelectrical investigations as it is based on the independent parameter of
seismic <inline-formula><mml:math id="M40" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity (Kneisel et al., 2008). We used SRT to confirm the
occurrence of frozen ground and to derive a broad threshold value to
distinguish between frozen and unfrozen subsurface conditions (Seppi et
al., 2015). On each rock glacier, one SRT profile was performed. The 2-D SRT
survey lines were set up next to 2-D ERT survey lines and in close proximity
to the boreholes (Fig. 1d, e). Twenty-four geophones were used with an along-line
separation of 3 <inline-formula><mml:math id="M41" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. We used a Geode Seismograph (Geometrics Inc.) and a
sledge hammer as source of the seismic signal. Shot points were located
between the geophones at Nair rock glacier and between every second geophone
at Uertsch rock glacier. Additionally, offset shots outside the profile lines
were performed. We used the software package SeisImager 2-D (Geometrics Inc.)
for data processing and analyses. This included a detection of the first
onset of the seismic waves on the geophones and a reciprocity check of their
travel time between source and receiver location (Geometrics, 2009). A
tomographic inversion scheme with an initial model based on a prior time–term
inversion was used, as this method is well suited for the assumed heterogenic
subsurface conditions (Schrott and Hoffmann, 2008). Surveys of comparative
ERT and SRT were performed on 6 September 2015 (Nair) and 27 July 2015
(Uertsch), respectively.</p><?xmltex \hack{\newpage}?>
</sec>
</sec>
<sec id="Ch1.S4">
  <title>Results</title>
<sec id="Ch1.S4.SS1">
  <title>Frozen ground verification and characteristics</title>
      <p>A comparative analysis of single ERT and SRT profiles provides initial
two-dimensional information on the local subsurface characteristics. The
information of this comparative approach is valuable for interpreting the
quasi-3-D ERI models, which are solely based on resistivity data. Additionally
presented data from borehole temperature loggers give information on the
ground thermal regime and verify the permanently frozen state of the
subsurface of the investigated rock glaciers.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p>Comparative analysis of <bold>(a)</bold> 2-D ERT profile,
<bold>(b)</bold> 2-D SRT profile and <bold>(c)</bold> 1-D temperature, resistivity
and <inline-formula><mml:math id="M42" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity profiles at Nair rock glacier. Profiles of resistivity
and <inline-formula><mml:math id="M43" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity are extracted from the tomograms above at the marked borehole
position (black line).</p></caption>
          <?xmltex \igopts{width=358.504724pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f03.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4" specific-use="star"><caption><p>Comparative analysis of <bold>(a)</bold> 2-D ERT profile,
<bold>(b)</bold> 2-D SRT profile and <bold>(c)</bold> 1-D temperature, resistivity
and <inline-formula><mml:math id="M44" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity profiles at Uertsch rock glacier. Profiles of
resistivity and <inline-formula><mml:math id="M45" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity are extracted from the tomograms above at
the marked borehole position (black line).</p></caption>
          <?xmltex \igopts{width=358.504724pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f04.png"/>

        </fig>

<sec id="Ch1.S4.SS1.SSS1">
  <title>Nair rock glacier</title>
      <p>A boundary which reflects the characteristic sharp increase in both
resistivity and <inline-formula><mml:math id="M46" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity at the transition from unfrozen to frozen
subsurface conditions can be obtained through the complete profiles at Nair
rock glacier (Fig. 3a, b). Corresponding values for this boundary are around
7 <inline-formula><mml:math id="M47" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in the ERT profile and 2 <inline-formula><mml:math id="M48" display="inline"><mml:mrow><mml:mi mathvariant="normal">km</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">s</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula> in the SRT
profile, respectively. At the position of the borehole, the boundary reaches
a depth of 4 <inline-formula><mml:math id="M49" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, which is not in accordance with the depth at which
the temperature profile from the day of the geophysical measurements (daily
means) undercuts the 0 <inline-formula><mml:math id="M50" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C line (Fig. 3c). However, values from the
temperature sensors installed between depths of 3 and 5 <inline-formula><mml:math id="M51" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> vary
between <inline-formula><mml:math id="M52" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.07 and <inline-formula><mml:math id="M53" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.19 <inline-formula><mml:math id="M54" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C. This means that the difference from
the freezing point is below the accuracy range of the sensors
(<inline-formula><mml:math id="M55" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>0.25 <inline-formula><mml:math id="M56" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C). Year-round temperature logging (see exemplary plots
in Fig. 3c) shows that values of daily mean temperatures are consistently
negative below a depth of 3 <inline-formula><mml:math id="M57" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, but only the sensors at 9 and 10 m
depth show values that are consistently lower than <inline-formula><mml:math id="M58" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.25 <inline-formula><mml:math id="M59" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C and
hence confirm permafrost conditions. The upslope part of the profiles, where the geophysical
profiles are overlapping (<inline-formula><mml:math id="M60" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo></mml:mrow></mml:math></inline-formula> 10–25 <inline-formula><mml:math id="M61" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>), represents the steep
talus cone at the root zone of the rock glacier. Active layer thickness in
this part is 2 <inline-formula><mml:math id="M62" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. Resistivity values are around 4 <inline-formula><mml:math id="M63" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>
in the unfrozen active layer and vary between 7 and 20 <inline-formula><mml:math id="M64" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in
the frozen layer. The latter values are considerably lower than the maximum
values of the ERT model, which are in the range of several hundred
<inline-formula><mml:math id="M65" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in an area that is not included in the SRT profile. Only
the SRT model, not the shallower ERT model, shows a second boundary at a
depth of 12 <inline-formula><mml:math id="M66" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, where <inline-formula><mml:math id="M67" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity values rise from 3.6 to
4.6 <inline-formula><mml:math id="M68" display="inline"><mml:mrow><mml:mi mathvariant="normal">km</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">s</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. However, it must be noted that data coverage is low
in this part. The downslope following part of the profiles (<inline-formula><mml:math id="M69" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo></mml:mrow></mml:math></inline-formula> 25–65 <inline-formula><mml:math id="M70" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>) shows a steady increase of ALT from 3 to 5 <inline-formula><mml:math id="M71" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
with decreasing resistivity values from 5 to 2 <inline-formula><mml:math id="M72" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. This can
be linked to an increase in water content as runoff of unconfined water is
reduced in this less steep part of the survey line. Resistivity values in the
frozen layer are lower in this part of the model and vary between 12 and
8 <inline-formula><mml:math id="M73" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. The lower boundary, which is detected only from the SRT
model, descends and disappears at <inline-formula><mml:math id="M74" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">36</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M75" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. The dip angle of this
boundary is much steeper than the slope angle of the rock glacier surface at
this position. It therefore likely represents the depth of bedrock. The
permafrost layer is shaped in a slightly wavy form in both models, which
shows an undulating frost table topography. The courses of this boundary are
not fully synchronous between the models, but this variation can be explained
by the small parallel shift between the survey lines (Fig. 1d).</p>
</sec>
<sec id="Ch1.S4.SS1.SSS2">
  <title>Uertsch rock glacier</title>
      <p>Similarly shaped structures can be observed in the geophysical results from
Uertsch rock glacier (Fig. 4a, b), although the positions of the structures
seem to be slightly shifted between the profiles. At the position of the
borehole, results are in good agreement with the observed subsurface
temperatures from the day of the measurements (Fig. 4c). At a depth of
4 <inline-formula><mml:math id="M76" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, a sharp increase of resistivity and <inline-formula><mml:math id="M77" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity can be
observed. The vertical temperature profile (daily means) of the borehole from
the day of the geophysical surveys, reaches 0 <inline-formula><mml:math id="M78" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C at the same depth
and shows that the detected boundary represents the frost table. Results from
year-round temperature logging at the borehole (see exemplary plots in
Fig. 4c) show that down from a depth of 4 <inline-formula><mml:math id="M79" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> to the end of the
thermistor chain, maximum daily mean temperature values remain between 0 and
<inline-formula><mml:math id="M80" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.18 <inline-formula><mml:math id="M81" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C. This represents permanently frozen conditions but is
within the accuracy range of the sensors. In the permafrost layer of the ERT
models, resistivity values are
between 8 and 39 <inline-formula><mml:math id="M82" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. These values can be linked to strong
variations of ice content, which range between ice-cemented and
ice-supersaturated conditions (Ikeda and Matsuoka, 2006). <inline-formula><mml:math id="M83" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity
values of this layer are between 2 and 3.2 <inline-formula><mml:math id="M84" display="inline"><mml:mrow><mml:mi mathvariant="normal">km</mml:mi><mml:mspace linebreak="nobreak" width="0.125em"/><mml:msup><mml:mi mathvariant="normal">s</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>. An area of
maximum high <inline-formula><mml:math id="M85" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity and maximum high resistivity values, slightly
shifted upslope in the SRT profile, is visible around the borehole location.
Within the ERT profile, the detected permafrost layer ends at a depth of
11 <inline-formula><mml:math id="M86" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, where resistivity values decrease again. However, low model
resolution values in the bottom part of the model (not shown) indicate that
this lower boundary is not necessarily constrained by the measured data.
<inline-formula><mml:math id="M87" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity values in the SRT section show a further increase with
depth below the lower end of the thermistor chain, which indicates that the
frozen layer is underlain by unfrozen material with a high level of
compaction. As for the ERT profile, it must be noted that data coverage is
low in this deeper part of the model. Following the profile in a downslope
direction, the layer of high <inline-formula><mml:math id="M88" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity sharply descends in the SRT
model between <inline-formula><mml:math id="M89" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">45</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M90" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> and <inline-formula><mml:math id="M91" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">19</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M92" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. This coincides with
a decrease of resistivity values to below 5 <inline-formula><mml:math id="M93" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> and therefore
likely represents unfrozen conditions over the complete depth in this part of
the profile. The position of this unfrozen part corresponds to the end of the
surface ridge structure on which the borehole is placed. In the further
downslope part of the profile, the detected structures resemble again those
from the upslope part. Near the surface, low resistivity and low <inline-formula><mml:math id="M94" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave
velocity values indicate an ALT of 6 <inline-formula><mml:math id="M95" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, which is larger than the ALT
of the upslope part.</p>
</sec>
</sec>
<sec id="Ch1.S4.SS2">
  <title>3-D subsurface models</title>
<sec id="Ch1.S4.SS2.SSS1">
  <title>Nair rock glacier</title>
      <p>The 3-D model of subsurface resistivity distribution at Nair rock glacier
(Fig. 5) shows a strong and stepwise decrease of resistivity values in
<inline-formula><mml:math id="M96" display="inline"><mml:mi>y</mml:mi></mml:math></inline-formula> direction. The range of modelled resistivity values spans from
420 <inline-formula><mml:math id="M97" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in the part of the model which corresponds to the
talus cone (see Fig. 5, model slice 0.5–1 <inline-formula><mml:math id="M98" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>) to
<inline-formula><mml:math id="M99" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 1 <inline-formula><mml:math id="M100" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in the shallow subsurface of the downslope part of
the model. Variations in <inline-formula><mml:math id="M101" display="inline"><mml:mi>x</mml:mi></mml:math></inline-formula> direction are less pronounced and only show a
slight increase of resistivity values from the margin of the rock glacier
towards the centre of the rock glacier.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5"><caption><p>Selected depth slices of the quasi-3-D ERI model for Nair.</p></caption>
            <?xmltex \igopts{width=199.169291pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f05.png"/>

          </fig>

      <p>The highest resistivity values aggregate in a 15–25 m long and 40 m wide
structure where values between 200 and 400 <inline-formula><mml:math id="M102" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in its central
part indicate a frozen state. It is overlain by a 2 m thick layer of lower
resistivity values, which vary between 4 and 8 <inline-formula><mml:math id="M103" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>, and is
therefore regarded as the unfrozen active layer. The structure of high
resistivity is not shaped homogeneously but narrows slightly along the
<inline-formula><mml:math id="M104" display="inline"><mml:mi>x</mml:mi></mml:math></inline-formula> axis towards the blanked out part from <inline-formula><mml:math id="M105" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">42</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M106" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> to <inline-formula><mml:math id="M107" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">30</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M108" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. The vertical extent of the structure exceeds the maximum depth
of the model (15 <inline-formula><mml:math id="M109" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>).</p>
      <p>In a downslope direction, at the transition between talus cone and
rock glacier, the structure of very high resistivity values ends with a sharp
drop of resistivity to values between 20 and 12 <inline-formula><mml:math id="M110" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. These
values, although over 1 magnitude lower than the maximum values, also
represent frozen material as confirmed by the 2-D models but indicate a
different type of ice genesis and/or a lower ice content. The upper layer
with lower resistivity values increases in thickness in a downslope direction
and towards the lateral margin of this upslope part of the rock glacier (up to
4 m thickness), while it remains thin in the central upslope part of the
rock glacier near the transition zone (2–3 m thickness). Resistivity values
in the upper layers are also reduced in this part of the model and vary
between 4 and 6 <inline-formula><mml:math id="M111" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>, which corresponds to similar observations
from the 2-D models.</p>
      <p>The adjacent part, which corresponds to the main part of the rock glacier,
generally shows much lower resistivity values. Like the upslope parts of the
model, it can be divided vertically into two layers. An upper layer with
values from 1 to 3 <inline-formula><mml:math id="M112" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> can be delimited from deeper parts of
the model where resistivity values vary between 7 and 16 <inline-formula><mml:math id="M113" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>.
In <inline-formula><mml:math id="M114" display="inline"><mml:mi>y</mml:mi></mml:math></inline-formula> direction, the boundary between the two layers is descending to a
vertical difference of 4 <inline-formula><mml:math id="M115" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>. This forms a wedge-shaped outline of the
high-resistivity layer which penetrates into the rock glacier from the talus
cone.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><caption><p>Selected depth slices of the quasi-3-D ERI model for Uertsch_01.
Numbers refer to structures described in the text.</p></caption>
            <?xmltex \igopts{width=199.169291pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f06.png"/>

          </fig>

</sec>
<sec id="Ch1.S4.SS2.SSS2">
  <title>Uertsch rock glacier</title>
      <p>The resistivity model of the lower part of Uertsch rock glacier
(Uertsch_01, Fig. 6) shows a heterogeneous pattern of small units.
Extraordinary low resistivity values (up to 1.5 <inline-formula><mml:math id="M116" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>) aggregate
in a 10 m wide curved structure in the western part of the model. The areas
of the model which show high resistivity values can be divided into several
tongue-shaped structures which root in a common zone (marked as (C) in
Fig. 6). These structures (named (1) to (3) in the following, as marked in Fig. 6) can be
delimited by extrapolating the threshold value for frozen and unfrozen
conditions which was gained from the comparison of geophysical and
temperature data (the rock glacier is rather homogenous regarding debris size
composition). Down to a depth of 6 <inline-formula><mml:math id="M117" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, three of those structures are
visible at <inline-formula><mml:math id="M118" display="inline"><mml:mrow><mml:mi>X</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">12</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M119" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> (1a, b), <inline-formula><mml:math id="M120" display="inline"><mml:mrow><mml:mi>X</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">24</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M121" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> (2) and <inline-formula><mml:math id="M122" display="inline"><mml:mrow><mml:mi>X</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">38</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M123" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> (3a, b). They are outlined by a band of lower resistivity
values. Below a model depth of 6 <inline-formula><mml:math id="M124" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, the boundaries between the
tongue-shaped structures vanish, but some parts of the high-resistivity
structures remain.</p>
      <p>The first of the three structures is 60 m long and reaches a depth of
7 <inline-formula><mml:math id="M125" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> in the upslope part (1a). In the downslope part (1b), the lower
boundary could not be delimited within the model. Resistivity values vary
between 7 and 14 <inline-formula><mml:math id="M126" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. The layer above this structure is highly
variable in thickness. The second structure (2) is about 70 m long and 10 m
wide. This structure is penetrated by the borehole as marked in Fig. 6. High
resistivity values of up to 30 <inline-formula><mml:math id="M127" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> aggregate in a layer of
6–8 m thickness. A shallow covering layer of low resistivity values exists
only partly and shows values of up to 1.5 <inline-formula><mml:math id="M128" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. Below the layer
of high resistivity, values decrease again. Resistivity values of around
1–3 <inline-formula><mml:math id="M129" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> are reached in the front of the structure, where a
prominent U-shaped patch of lower resistivity values is visible (Fig. 6,
depth slices 3–4 and 4–5 <inline-formula><mml:math id="M130" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>). The third area of high resistivity
values is 70 m long and reaches to the northern boundary of the model. The
upslope part of the structure (3a) can be obtained in the first model slice,
while the downslope part (3b) can be obtained below a depth of 3 <inline-formula><mml:math id="M131" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
underneath a layer of resistivity values of around 5 <inline-formula><mml:math id="M132" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. A
lower boundary of the structure could not be delimited within the model
boundaries in the upslope part, while the downslope part can be detected down
to a depth of 9 <inline-formula><mml:math id="M133" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> (no depth slice displayed).</p>
      <p>The resistivity model of the upper part of Uertsch rock glacier
(Uertsch_02, Fig. 7) directly follows the Uertsch_01 model in an
upslope direction (see Figs. 1e, 2d). One dominant high-resistivity anomaly
occurs at the central western part of the model (4) (see Fig. 7 for structures (4) and (5)). It reaches
resistivity values from 35 to 250 <inline-formula><mml:math id="M134" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. While the upslope part
of the structure partly occurs directly below the surface in the first model
slice, the downslope part is only visible down from a depth of 2 <inline-formula><mml:math id="M135" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>
where the structure reaches its maximum spatial extent. It remains spatially
nearly constant down to a depth of 5 <inline-formula><mml:math id="M136" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> and decreases in extent and
resistivity further downwards.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7"><caption><p>Selected depth slices of the quasi-3-D ERI model for Uertsch_02.
Numbers refer to structures described in the text.</p></caption>
            <?xmltex \igopts{width=199.169291pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f07.png"/>

          </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F8" specific-use="star"><caption><p>Comparison between independently inverted 2-D (central row) and 3-D
(lower row) models. Upper row shows model representations as blocks and
positions of the selected slices.</p></caption>
            <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://tc.copernicus.org/articles/11/841/2017/tc-11-841-2017-f08.jpg"/>

          </fig>

      <p>A second, rather undefined, pattern of high resistivity values (5a, b) becomes
apparent as a spatial structure below a depth of 2 <inline-formula><mml:math id="M137" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, although some
model cells in the area already display high resistivity values in upper
depth slices. Attaching this structure to the resistivity distribution of the
Uertsch_01 model, reveals that this structure forms a precursor of the
three tongue-shaped high-resistivity structures in the lower part of the
rock glacier. In the shallow subsurface of the Uertsch_02 model, the
structure displays values from 7 to 18 <inline-formula><mml:math id="M138" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. At a depth of
6 <inline-formula><mml:math id="M139" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, it loses an elongated segment (5a) and is reduced in extent to
an area of <inline-formula><mml:math id="M140" display="inline"><mml:mrow><mml:mn mathvariant="normal">14</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi><mml:mo>×</mml:mo><mml:mn mathvariant="normal">30</mml:mn><mml:mspace width="0.125em" linebreak="nobreak"/><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>. It is detectable down to a
depth of 11 <inline-formula><mml:math id="M141" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>.</p>
      <p>The described resistivity distribution clearly reflects the observed surface
morphology (see Fig. 2d for morphological structures). It shows high
resistivity values within the arcuate (rock glacier snout) and longitudinal
ridges (upslope part of the rock glacier) and low resistivity values below the
interrupting furrows and surface depressions.</p>
</sec>
</sec>
</sec>
<sec id="Ch1.S5">
  <title>Discussion</title>
<sec id="Ch1.S5.SS1">
  <title>Methodological aspects</title>
      <p>A comparison between independently inverted 2-D models and corresponding 2-D
slices of the 3-D models (Fig. 8) shows differences between the results of
both approaches. This affects the modelled resistivity values as well as the
depths of the detected structures. At Nair rock glacier, resistivity
values in the centre of the longitudinal profile (between the perpendicular
profiles) are between 12 and 16 <inline-formula><mml:math id="M142" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in the 2-D model while they
are between 8 and 12 <inline-formula><mml:math id="M143" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> in the 3-D model. Greater differences
are shown in the upslope part of the longitudinal profile of Uertsch_01.
Around <inline-formula><mml:math id="M144" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:mn mathvariant="normal">90</mml:mn></mml:mrow></mml:math></inline-formula> <inline-formula><mml:math id="M145" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, the 3-D model shows a high-resistivity structure
which is displayed with much lower resistivity values by the independently
inverted 2-D data. The high-resistivity structure in the Uertsch_02 model
(referred to as (4) in Fig. 7) shows a shallow active layer in the results
of the 2-D approach, while it appears directly below the surface in the 3-D
model. Structures detected by the 3-D approach are more smoothly  shaped than the
same structures detected by the 2-D approach, which is likely the result of
diagonal filters and interpolation effects.</p>
      <p>The quality of quasi-3-D ERI models is influenced by the separation of the
survey grid lines. In our investigation, the chosen value of twice the
along-line electrode separation as distance between the <inline-formula><mml:math id="M146" display="inline"><mml:mi>Y</mml:mi></mml:math></inline-formula> lines of all
survey grids provides an adequate data coverage for investigations of the
shallow subsurface (Gharibi and Bentley, 2005). The separation factor of
<inline-formula><mml:math id="M147" display="inline"><mml:mi>X</mml:mi></mml:math></inline-formula> lines was adjusted due to site-specific reasons, like deep snow fields or
topographical obstacles and ranges between a factor of 3 and 6 of the
along-line electrode spacing. However, this is still assumed to be sufficient
as the application of perpendicular grid lines is not a mandatory requirement
for 3-D data acquisition but useful for the delimitation of small-scale
structures orthogonal to the survey line direction (Loke et al., 2013;
Rödder and Kneisel, 2012; Chambers et al., 2002). Despite the known
limitations of the DipDip electrode array under rough surface
conditions (rather low signal strength), its application as a basic electrode
array in this study provided very good results. This was likely promoted by
the pebbly debris material, which improved the coupling of the electrodes to
the ground.</p>
      <p>The suitability of the approach is shown by the excellent data quality (only
4 % of all data points were removed during processing; see Sect. 3.1 and
Table 1) and by a comparison between 3-D results from the independently
inverted DipDip data points and WenSl data points of the Uertsch_02 data
set, which provided similar results (not shown). Additionally, we observed
only a slight increase in misfit errors for the 3-D models compared to the
independently inverted 2-D models, which indicates a precise grid set-up. The
resolution matrix approach, which was performed to evaluate the information
content of the model cells and hence to assess model reliability and
penetration depth (see Sect. 3.1), shows that most parts of the 3-D models
are significantly resolved (not shown). Only those parts of the model layers
which are underneath the high-resistivity anomalies and furthermore deeper
than 9 <inline-formula><mml:math id="M148" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula> are weakly resolved and are hence interpreted carefully.
Results from the comparative 2-D SRT/2-D ERT surveys show good structural
accordance and validate the chosen approach.</p>
      <p>The detected structures from our geoelectrical investigations of Nair
rock glacier broadly resemble the structures which were detected by Ikeda and
Matsuoka (2006), who performed a single 2-D ERT survey on the same
rock glacier. The <inline-formula><mml:math id="M149" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity values from their study for a two-layered
subsurface (0.34 and 2.9 <inline-formula><mml:math id="M150" display="inline"><mml:mrow><mml:mi mathvariant="normal">km</mml:mi><mml:mspace width="0.125em" linebreak="nobreak"/><mml:msup><mml:mi mathvariant="normal">s</mml:mi><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math></inline-formula>) were also broadly reproduced in
our study. However, they observed an ALT of 2.2–2.4 <inline-formula><mml:math id="M151" display="inline"><mml:mi mathvariant="normal">m</mml:mi></mml:math></inline-formula>, which is lower
than what we observed in our results. This is likely caused by differences in
the methodological approach or in the acquisition geometry. However, the
impact of atmospheric warming during the last decade is also conceivable.</p>
</sec>
<sec id="Ch1.S5.SS2">
  <title>Range of resistivity values</title>
      <p>For most parts of the presented rock glacier models, the range of resistivity
values for frozen conditions is rather low compared to other rock glacier
sites (Seppi et al., 2015; Dusik et al., 2015; Kneisel, 2010b; Hilbich et
al., 2009; Maurer and Hauck, 2007) and is closer to those of landforms in
fine-grained environments (Lewkowicz et al., 2011; Farbrot et al., 2007;
Kneisel et al., 2007; Ross et al., 2007). Nevertheless, borehole temperature
measurements and comparative SRT surveys presented in this study indicate the
occurrence of permafrost, although <inline-formula><mml:math id="M152" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity values are in the
lowermost range for frozen ground (see compilation of Draebing, 2016). The
detected threshold values for a frozen state of around 7 <inline-formula><mml:math id="M153" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>
at Nair rock glacier and around 8 <inline-formula><mml:math id="M154" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> at Uertsch rock glacier
are plausible for the sites as Ikeda and Matsuoka (2006) found similar values
for frozen conditions at a similar rock glacier by a comparison between
direct observations in a pit and ERT. However, the extrapolation of a single
threshold value on a whole rock glacier can be problematic due to variations
of grain size and porosity. We think that the extrapolation is suitable at
the investigated sites, as such variations are not visible on the
surface. The low level of
resistivity values at the investigated sites can be explained by the small
grain size of the debris material, which is known to show much lower
resistivity values in a frozen state than ice-bearing bouldery materials.
This is caused by the physical properties of fine materials, which can store
a relatively high amount of liquid water at temperatures close to the melting
point or even at sub-zero temperatures, resulting in the observed low
resistivity values (e.g. Schneider et al., 2013). Additionally, the lower
pore space volume can generally lower the ground ice volume, which can
develop by freezing of unconfined water (Scapozza et al., 2011; Vonder
Mühll et al., 2000). The non-crystalline origin of the talus material can
be listed as another factor which influences the local resistivity regime
(Etzelmüller et al., 2006). A high proportion of unfrozen water can also
be a reason for the mismatch between the observed frost table depths in the
vertical profiles of resistivity, <inline-formula><mml:math id="M155" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity and temperature at Nair
rock glacier (Fig. 3c). As the geophysical approaches are affected by
material properties and not directly by temperature, the characteristic
increase of resistivity and <inline-formula><mml:math id="M156" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula>-wave velocity does not coincide with the
depth of the observed sub-zero temperatures (Pogliotti et al., 2015; Hauck,
2002). However, sensor accuracy must also be taken into account. Results from
ERT and SRT at Uertsch borehole do not show this mismatch phenomenon. This
might be linked to an unhindered drain of unconfined water into the adjacent
unfrozen part of the transect.</p>
</sec>
<sec id="Ch1.S5.SS3">
  <title>Structure of Nair rock glacier</title>
      <p>Ice content distribution at Nair rock glacier is probably determined by an ice
patch of sedimentary origin, buried under the steep talus cone. This is
indicated by resistivity values of up to 420 <inline-formula><mml:math id="M157" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> which display
highly ice-supersaturated conditions. The occurrence of such structures in
the root zone of rock glaciers is a well-known phenomenon which develops from
buried snow banks or ice patches which were incorporated into the subsurface,
e.g. by rockfall (Monnier et al., 2011; Lugon et al., 2004; Isaksen et
al., 2000; Haeberli and Vonder Mühll, 1996). A high geomorphological
activity is present at Nair rock glacier where frequent rockfall events were
observed during several field campaigns. The sharp drop in resistivity values
to 20 <inline-formula><mml:math id="M158" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula> shows that a clear distinction between the embedded
snow bank and the adjacent part is present. This may indicate a relatively
young age of incorporation on timescales of landform development, as this
contrast would probably diminish through time. A qualitatively similar drop
of resistivity values was observed by Ribolini et al. (2010) at Schiantala
rock glacier (French Maritime Alps), where it separates an area of
debris-covered sedimentary ice and an area of typical permafrost ice at the
margin of an LIA glaciation. However, linking the incorporation of
sedimentary ice into Nair rock glacier to the end of LIA, for which a
glaciation is displayed on ancient maps (Coaz and Leuzinger, 1878), is
speculative. The occurrence of ice of sedimentary origin below the talus cone
is also an adequate interpretation for the downslope following part of Nair
rock glacier which shows resistivity values typical for congelation ice and a
decrease from 20 to 12 <inline-formula><mml:math id="M159" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>.</p>
      <p>In this part of the rock glacier, the ability of the pebbly material to store
water and to reduce the speed of runoff (Ikeda et al., 2008) supports the
refreezing of the meltwater from the embedded sedimentary ice. This results
in a gradual decrease of ice content in a downslope direction and towards the
lateral margin of the rock glacier, which is less affected by meltwater flow
than the main part of the rock glacier. Thus, it can explain the observed
stepwise increase of ALT and forms the wedge-shaped structure. If we consider
the described processes as a current phenomenon, the ice-free parts at Nair
rock glacier are equal to the permafrost-free parts and vice versa. Stable
ground ice conditions at the rock glacier are indicated by the gradual shape
of the continuous frost table, the generally permafrost-favourable conditions
according to the Alpine Permafrost Index Map (Boeckli et al., 2012) and
the authors' own year-round measurements of ground surface temperatures (not
shown).</p>
</sec>
<sec id="Ch1.S5.SS4">
  <title>Structure of Uertsch rock glacier</title>
      <p>The observed resistivity variations of the Uertsch rock glacier models
indicate variations in ice content and show that different processes were
involved in rock glacier development. The investigated part of the rock glacier
lacks a continuous frost table and the strongly varying ALT indicates a
disturbed development. It likely reflects a disequilibrium between the modern
environmental conditions and those at the time of ground ice formation.</p>
      <p>The ice-free and hence probably unfrozen ridge at the western edge of the
rock glacier (extension of the lateral moraine) seems to be unconnected to the
more differentiated central part. The observed lateral moraine and the
surface ice patch suggest that interactions between glacial and periglacial
processes occurred, like they were assumed for multiple other rock glaciers
(Monnier et al., 2011; Ribolini et al., 2010; Berger et al., 2004; Lugon et
al., 2004). Glaciation during LIA, as illustrated on an ancient topographical
map from the 1870s, was only slightly more extensive than the recent surface
ice patch and remained upslope of the today ridge-affected part (see Fig. 2c;
Coaz and Leuzinger, 1878). However, like Monnier et al. (2013) pointed out for
Sachette rock glacier (French Alps), one of the several other glacier advances
during Holocene could have overridden the rock glacier.</p>
      <p>The occurrence of buried ice of sedimentary origin is conceivable only for
the well-defined structure in the central western part of Uertsch rock glacier
(Uertsch_02 model), which corresponds to the presumably glacial
depression. Next to a surface snow field which existed during the days of the
3-D survey within this depression, maximum resistivity values were detected
(250 <inline-formula><mml:math id="M160" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>). Although this is still not in the range of
sedimentary ice which typically reaches up to several <inline-formula><mml:math id="M161" display="inline"><mml:mrow><mml:mi mathvariant="normal">M</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>
(Haeberli and Vonder Mühll, 1996), a subsurface formation of congelation
ice by refreezing meltwater from sedimentary surface ice or an alteration of
remnant sedimentary ice by multiple freeze–thaw cycles seems possible,
especially in the case of a former glaciation. The occurrence of buried ice of
glacial origin within the rock glacier snout, as also frequently observed at
other sites, can be excluded by the range of the modelled resistivity values
(<inline-formula><mml:math id="M162" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 70 <inline-formula><mml:math id="M163" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>), which  indicates distinct patches of
congelation ice within the ridges by the three tongue-shaped structures of
high resistivity values. A similarly shaped elongated geometry of frozen
structures was mapped in the Dolomites by Seppi et al. (2015).</p>
      <p>The observed pattern of frozen conditions below the ridges and unfrozen
conditions below the furrows contrasts the commonly known distribution
pattern, which shows colder temperatures in the furrows due to topographic or
microclimatic effects (Hoelzle 1999; Harris and Pedersen, 1998). The formation
of the characteristic ridge–furrow topography on the rock glacier surface is
known to result from compressive processes (Frehner et al., 2015; Springman
et al., 2012; Kääb and Weber, 2004). At our study site, the model of
overthrusting lobes, as generally presented by Kääb and Weber (2004),
fits well to the observations. Ridge formation is assumed to induce a local
enrichment of ice content through a thickening of ice-saturated layers (Ikeda
and Matsuoka, 2006) and can therefore explain the relatively high ice content
within the transverse parts of the arcuate ridges in contrast to the lower
ice content of the upslope longitudinal ridges. A patchy occurrence of
relatively high ice content within the ridges may also explain the low
variation of borehole temperatures around the freezing point as much thermal
energy will likely be lost by phase transitions of water. A thickening of the
active layer as described by Haeberli and Vonder Mühll (1996) could only
be detected in the lowermost part of the ridges where the deformation is
strongest. The upslope central part of the rock glacier, where ridges are
shaped in longitudinal direction and show resistivity values from 8 to
20 <inline-formula><mml:math id="M164" display="inline"><mml:mrow><mml:mi mathvariant="normal">k</mml:mi><mml:mi mathvariant="normal">Ω</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:mrow></mml:math></inline-formula>, lacks this thickening, likely due to a reduced dynamic
forming. Regarding again the model of overthrusting processes, Kääb
and Weber (2004) presumed that those lateral ridges are the result of ridge
deformation by a decrease in speed at the margins of the flow area. This
former marginal position of the longitudinal ridges supports the concept of a
successive rock glacier development. We assume that ridge formation at Uertsch
rock glacier is connected to tongue-shaped areas of creep activity on the
rock glacier surface. The lower resistivity values of the extensive flow
structures are likely caused by freezing of ionically enriched water at the
permafrost base (Haeberli and Vonder Mühll, 1996). However, a glacial
formation of the ridges, e.g. as observed by Monnier et al. (2011) at Thabor
rock glacier, cannot be excluded because a general influence of surface ice on the
formation of Uertsch rock glacier is obvious.</p>
</sec>
</sec>
<sec id="Ch1.S6" sec-type="conclusions">
  <title>Conclusions</title>
      <p>The application of quasi-3-D ERI enables the detection and
mapping of permafrost conditions in a spatially extensive way. At Uertsch
rock glacier, the approach showed its value for the delimitation of several
small-scale frozen structures within heterogeneous subsurface conditions. The
rather homogenous subsurface layering at Nair rock glacier excludes the
occurrence of major structural anomalies and shows an undulating frost table
topography as well as a gradually decreasing ice content. An excellent data
quality was promoted by the pebbly grain size of the investigated
rock glaciers and permitted the extensive application of DipDip
electrode array. However, due to the specific conditions at pebbly
investigation sites, concerning e.g. the range of resistivity values and the
influence of grain size on the occurring processes, results should be
extrapolated to bouldery rock glaciers only carefully. Inversion
characteristics and additionally performed comparative surveys indicate
reliable results and emphasise the suitability of the approach. Our results
show that the following subsurface characteristics and their small-scale
spatial variations can be derived from quasi-3-D ERI and interpreted in
combination with geomorphological observations from the investigated
rock glaciers:
<list list-type="bullet"><list-item>
      <p>Quasi-3-D ERI results in combination with the observed surface ridge
structures show that areas of compressional and extensional flow occur in
close proximity and indicate a successive rock glacier development.</p></list-item><list-item>
      <p>Buried ice of sedimentary origin is a crucial factor for rock glacier
development as related processes (e.g. meltwater flow) can influence ground
ice content distribution and reflect past glacier–permafrost interactions.</p></list-item><list-item>
      <p>Meltwater can strongly increase ground ice content in downslope and less
inclined parts of rock glaciers and changes its distribution to a gradual
decrease which follows the observed rock glacier topography and results in a
wedge-shaped outline of the permafrost body.</p></list-item><list-item>
      <p>Mapping frost table topography and consistency allow us to infer the
occurrence of shaping processes and hence to assess whether a state of
equilibrium or disequilibrium to modern environmental conditions exists.</p></list-item></list></p>
      <p>To further improve our understanding of landform development, the additional
application of GPR and the set-up of a denser network of SRT profiles are
advised as these approaches are preferably used for the detection of layer
boundaries. The presented resistivity mapping further allows an overlay of
resistivity distribution with mapping of surface flow velocity and subsurface
porosity. This might be a next step towards an identification of
surface–subsurface process interactions.</p>
</sec>
<sec id="Ch1.S7">
  <title>Data availability</title>
      <p>Geophysical data are available upon request from the
authors.</p>
</sec>

      
      </body>
    <back><ack><title>Acknowledgements</title><p>The authors gratefully acknowledge the German Research Foundation (DFG) for
financial support (KN542/13-1) and the municipalities of Celerina and
Bergün for the permission to use their access roads. Thanks to Danilo
Fries and Carina Selbach for their assistance in the field. We would also
like to thank the editor, Christian Hauck, and two anonymous reviewers for
their constructive comments. This publication was funded by the German
Research Foundation (DFG) and the University of Würzburg in the funding
programme Open Access Publishing. <?xmltex \hack{\newline}?><?xmltex \hack{\newline}?>
Edited by: C. Hauck <?xmltex \hack{\newline}?>
Reviewed by: two anonymous referees</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bib1"><label>1</label><mixed-citation>Berger, J., Krainer, K., and Mostler, W.: Dynamics of an active rock glacier
(Ötztal Alps, Austria), Quarternary Res., 62, 233–242,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.yqres.2004.07.002" ext-link-type="DOI">10.1016/j.yqres.2004.07.002</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib2"><label>2</label><mixed-citation>Boeckli, L., Brenning, A., Gruber, S., and Noetzli, J.: Permafrost
distribution in the European Alps: calculation and evaluation of an index map
and summary statistics, The Cryosphere, 6, 807–820,
<ext-link xlink:href="http://dx.doi.org/10.5194/tc-6-807-2012" ext-link-type="DOI">10.5194/tc-6-807-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib3"><label>3</label><mixed-citation>Chambers, J. E., Ogilvy, R. D., Kuras, O., Cripps, J., and Meldrum, P. I.: 3D
electrical imaging of known targets at a controlled environmental test site,
Environ. Geol., 41, 690–704, <ext-link xlink:href="http://dx.doi.org/10.1007/s00254-001-0452-4" ext-link-type="DOI">10.1007/s00254-001-0452-4</ext-link>, 2002.</mixed-citation></ref>
      <ref id="bib1.bib4"><label>4</label><mixed-citation>
Coaz, J. W. F. and Leuzinger, R.: Bevers, Eidg. Stabsbureau, Bern, 1878.</mixed-citation></ref>
      <ref id="bib1.bib5"><label>5</label><mixed-citation>
Coaz, J. W. F., Leuzinger, R., and Held, L.: St. Moritz, Eidg. Stabsbureau
[i.e. Eidg. Landestopographie], Bern, Nachträge 1917, 1925.</mixed-citation></ref>
      <ref id="bib1.bib6"><label>6</label><mixed-citation>
Coaz, J. W. F., Leuzinger, R., and Held, L.: St. Moritz, Eidg.
Landestopographie, Bern, Nachträge 1944, 1946.</mixed-citation></ref>
      <ref id="bib1.bib7"><label>7</label><mixed-citation>
Draebing, D.: Application of refraction seismics in alpine permafrost
studies: A review, Earth-Sci. Rev., 155, 136–152, 2016.</mixed-citation></ref>
      <ref id="bib1.bib8"><label>8</label><mixed-citation>Dusik, J.-M., Leopold, M., Heckmann, T., Haas, F., Hilger, L., Morche, D.,
Neugirg, F., and Becht, M.: Influence of glacier advance on the development
of the multipart Riffeltal rock glacier, Central Austrian Alps, Earth Surf.
Proc. Land., 40, 965–980, <ext-link xlink:href="http://dx.doi.org/10.1002/esp.3695" ext-link-type="DOI">10.1002/esp.3695</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib9"><label>9</label><mixed-citation>Etzelmüller, B., Heggem, E. S. F., Sharkhuu, N., Frauenfelder, R.,
Kääb, A., and Goulden, C.: Mountain permafrost distribution modelling
using a multi-criteria approach in the Hövsgöl area, northern
Mongolia, Permafrost Periglac., 17, 91–104, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.554" ext-link-type="DOI">10.1002/ppp.554</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib10"><label>10</label><mixed-citation>Farbrot, H., Etzelmüller, B., Schuler, T. V., Guðmundsson, Á.,
Eiken, T., Humlum, O., and Björnsson, H.: Thermal characteristics and
impact of climate change on mountain permafrost in Iceland, J. Geophys. Res.,
112, F03S90, <ext-link xlink:href="http://dx.doi.org/10.1029/2006JF000541" ext-link-type="DOI">10.1029/2006JF000541</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib11"><label>11</label><mixed-citation>Frehner, M., Ling, A. H. M., and Gärtner-Roer, I.: Furrow-and-Ridge
Morphology on Rockglaciers Explained by Gravity-Driven Buckle Folding: A Case
Study From the Murtèl Rockglacier (Switzerland), Permafrost Periglac.,
26, 57–66, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.1831" ext-link-type="DOI">10.1002/ppp.1831</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib12"><label>12</label><mixed-citation>Geometrics: SeisImager/2D<sup>™</sup> Manual, Version
3.3, 2009.</mixed-citation></ref>
      <ref id="bib1.bib13"><label>13</label><mixed-citation>Gharibi, M. and Bentley, L. R.: Resolution of 3-D Electrical Resistivity
Images from Inversions of 2-D Orthogonal Lines, J. Environ. Eng. Geoph., 10,
339–349, <ext-link xlink:href="http://dx.doi.org/10.2113/JEEG10.4.339" ext-link-type="DOI">10.2113/JEEG10.4.339</ext-link>, 2005.</mixed-citation></ref>
      <ref id="bib1.bib14"><label>14</label><mixed-citation>
Haeberli, W. and Vonder Mühll, D. S.: On the characteristics and possible
origins of ice in rock glacier permafrost, Z. Geomorphol., Suppl.-Bd. 104,
43–57, 1996.</mixed-citation></ref>
      <ref id="bib1.bib15"><label>15</label><mixed-citation>Haeberli, W., Hallet, B., Arenson, L. U., Elconin, R., Humlum, O.,
Kääb, A., Kaufmann, V., Ladanyi, B., Matsuoka, N., Springman, S. M.,
and Vonder Mühll, D. S.: Permafrost creep and rock glacier dynamics,
Permafrost Periglac., 17, 189–214, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.561" ext-link-type="DOI">10.1002/ppp.561</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib16"><label>16</label><mixed-citation>Hanson, S. and Hoelzle, M.: The thermal regime of the active layer at the
Murtèl rock glacier based on data from 2002, Permafrost Periglac., 15,
273–282, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.499" ext-link-type="DOI">10.1002/ppp.499</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib17"><label>17</label><mixed-citation>Harris, C., Arenson, L. U., Christiansen, H. H., Etzelmüller, B.,
Frauenfelder, R., Gruber, S., Haeberli, W., Hauck, C., Hoelzle, M., Humlum,
O., Isaksen, K., Kääb, A., Kern-Lütschg, M. A., Lehning, M.,
Matsuoka, N., Murton, J. B., Nötzli, J., Phillips, M., Ross, N.,
Seppälä, M., Springman, S. M., and Vonder Mühll, D. S.:
Permafrost and climate in Europe: Monitoring and modelling thermal,
geomorphological and geotechnical responses, Earth-Sci. Rev., 92, 117–171,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.earscirev.2008.12.002" ext-link-type="DOI">10.1016/j.earscirev.2008.12.002</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bib18"><label>18</label><mixed-citation>Harris, S. A. and Pedersen, D. E.: Thermal regimes beneath coarse blocky
materials, Permafrost Periglac., 9, 107–120,
<ext-link xlink:href="http://dx.doi.org/10.1002/(SICI)1099-1530(199804/06)9:2&lt;107:AID-PPP277&gt;3.0.CO;2-G" ext-link-type="DOI">10.1002/(SICI)1099-1530(199804/06)9:2&lt;107:AID-PPP277&gt;3.0.CO;2-G</ext-link>,
1998.</mixed-citation></ref>
      <ref id="bib1.bib19"><label>19</label><mixed-citation>Hauck, C.: Frozen ground monitoring using DC resistivity tomography, Geophys.
Res. Lett., 29, 12-1–12-4, <ext-link xlink:href="http://dx.doi.org/10.1029/2002GL014995" ext-link-type="DOI">10.1029/2002GL014995</ext-link>, 2002.</mixed-citation></ref>
      <ref id="bib1.bib20"><label>20</label><mixed-citation>Hauck, C.: New Concepts in Geophysical Surveying and Data Interpretation for
Permafrost Terrain, Permafrost Periglac., 24, 131–137,
<ext-link xlink:href="http://dx.doi.org/10.1002/ppp.1774" ext-link-type="DOI">10.1002/ppp.1774</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib21"><label>21</label><mixed-citation>Hauck, C., Böttcher, M., and Maurer, H.: A new model for estimating
subsurface ice content based on combined electrical and seismic data sets,
The Cryosphere, 5, 453–468, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-5-453-2011" ext-link-type="DOI">10.5194/tc-5-453-2011</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib22"><label>22</label><mixed-citation>
Hausmann, H., Krainer, K., Brückl, E., and Ullrich, C.: Internal
structure, ice content and dynamics of Ölgrube and Kaiserberg rock
glaciers (Ötztal Alps, Austria) de-termined from geophysical surveys,
Austrian Journal of Earth Sciences, 105, 12–31, 2012.</mixed-citation></ref>
      <ref id="bib1.bib23"><label>23</label><mixed-citation>Hilbich, C., Marescot, L., Hauck, C., Loke, M. H., and Mäusbacher, R.:
Applicability of electrical resistivity tomography monitoring to coarse
blocky and ice-rich permafrost landforms, Permafrost Periglac., 20, 269–284,
<ext-link xlink:href="http://dx.doi.org/10.1002/ppp.652" ext-link-type="DOI">10.1002/ppp.652</ext-link>, 2009.</mixed-citation></ref>
      <ref id="bib1.bib24"><label>24</label><mixed-citation>Hoelzle, M., Wegmann, M., and Krummenacher, B.: Miniature temperature
dataloggers for mapping and monitoring of permafrost in high mountain areas:
First experience from the Swiss Alps, Permafrost Periglac., 10, 113–124,
<ext-link xlink:href="http://dx.doi.org/10.1002/(SICI)1099-1530(199904/06)10:2&lt;113:AID-PPP317&gt;3.0.CO;2-A" ext-link-type="DOI">10.1002/(SICI)1099-1530(199904/06)10:2&lt;113:AID-PPP317&gt;3.0.CO;2-A</ext-link>,
1999.</mixed-citation></ref>
      <ref id="bib1.bib25"><label>25</label><mixed-citation>Ikeda, A.: Combination of conventional geophysical methods for sounding the
composition of rock glaciers in the Swiss Alps, Permafrost Periglac., 17,
35–48, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.550" ext-link-type="DOI">10.1002/ppp.550</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib26"><label>26</label><mixed-citation>Ikeda, A. and Matsuoka, N.: Pebbly versus bouldery rock glaciers: Morphology,
structure and processes, Geomorphology, 73, 279–296,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2005.07.015" ext-link-type="DOI">10.1016/j.geomorph.2005.07.015</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib27"><label>27</label><mixed-citation>Ikeda, A., Matsuoka, N., and Kääb, A.: Fast deformation of
perennially frozen debris in a warm rock glacier in the Swiss Alps: An effect
of liquid water, J. Geophys. Res., 113, F01021, <ext-link xlink:href="http://dx.doi.org/10.1029/2007JF000859" ext-link-type="DOI">10.1029/2007JF000859</ext-link>,
2008.</mixed-citation></ref>
      <ref id="bib1.bib28"><label>28</label><mixed-citation>Isaksen, K., Ødegård, R. S., Eiken, T., and Sollid, J. L.:
Composition, flow and development of two tongue-shaped rock glaciers in the
permafrost of Svalbard, Permafrost Periglac., 11, 241–257,
<ext-link xlink:href="http://dx.doi.org/10.1002/1099-1530(200007/09)11:3&lt;241:AID-PPP358&gt;3.0.CO;2-A" ext-link-type="DOI">10.1002/1099-1530(200007/09)11:3&lt;241:AID-PPP358&gt;3.0.CO;2-A</ext-link>,
2000.</mixed-citation></ref>
      <ref id="bib1.bib29"><label>29</label><mixed-citation>Kääb, A. and Weber, M.: Development of transverse ridges on rock
glaciers: Field measurements and laboratory experiments, Permafrost
Periglac., 15, 379–391, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.506" ext-link-type="DOI">10.1002/ppp.506</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib30"><label>30</label><mixed-citation>Kääb, A., Frauenfelder, R., and Roer, I.: On the response of
rockglacier creep to surface temperature increase, Global Planet. Change, 56,
172–187, <ext-link xlink:href="http://dx.doi.org/10.1016/j.gloplacha.2006.07.005" ext-link-type="DOI">10.1016/j.gloplacha.2006.07.005</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib31"><label>31</label><mixed-citation>
Kneisel, C., Lehmkuhl, F., Winkler, S., Tressel, E., and Schröder, H.:
Legende für geomorphologische Kartierungen in Hochgebirgen (GMK
Hochgebirge), Geographische Gesellschaft, Trier, Trierer geographische
Studien, 18, 24 pp., 1998.</mixed-citation></ref>
      <ref id="bib1.bib32"><label>32</label><mixed-citation>Kneisel, C.: Frozen ground conditions in a subarctic mountain environment,
Northern Sweden, Geomorphology, 118, 80–92,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2009.12.010" ext-link-type="DOI">10.1016/j.geomorph.2009.12.010</ext-link>, 2010a.</mixed-citation></ref>
      <ref id="bib1.bib33"><label>33</label><mixed-citation>Kneisel, C.: The nature and dynamics of frozen ground in alpine and subarctic
periglacial environments, Holocene, 20, 423–445,
<ext-link xlink:href="http://dx.doi.org/10.1177/0959683609353432" ext-link-type="DOI">10.1177/0959683609353432</ext-link>, 2010b.</mixed-citation></ref>
      <ref id="bib1.bib34"><label>34</label><mixed-citation>Kneisel, C. and Kääb, A.: Mountain permafrost dynamics within a
recently exposed glacier forefield inferred by a combined geomorphological,
geophysical and photogrammetrical approach, Earth Surf. Proc. Land., 32,
1797–1810, <ext-link xlink:href="http://dx.doi.org/10.1002/esp.1488" ext-link-type="DOI">10.1002/esp.1488</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib35"><label>35</label><mixed-citation>Kneisel, C., Sæmundsson, Þ., and Beylich, A. A.: Reconnaissance
Surveys Of Contemporary Permafrost Environments In Central Iceland Using
Geoelectrical Methods: Implications For Permafrost Degradation And Sediment
Fluxes, Geogr. Ann. A, 89, 41–50, <ext-link xlink:href="http://dx.doi.org/10.1111/j.1468-0459.2007.00306.x" ext-link-type="DOI">10.1111/j.1468-0459.2007.00306.x</ext-link>,
2007.</mixed-citation></ref>
      <ref id="bib1.bib36"><label>36</label><mixed-citation>Kneisel, C., Hauck, C., Fortier, R., and Moorman, B.: Advances in geophysical
methods for permafrost investigations, Permafrost Periglac., 19, 157–178,
<ext-link xlink:href="http://dx.doi.org/10.1002/ppp.616" ext-link-type="DOI">10.1002/ppp.616</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib37"><label>37</label><mixed-citation>Kneisel, C., Emmert, A., and Kästl, J.: Application of 3D electrical
resistivity imaging for mapping frozen ground conditions exemplified by three
case studies, Geomorphology, 210, 71–82,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2013.12.022" ext-link-type="DOI">10.1016/j.geomorph.2013.12.022</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib38"><label>38</label><mixed-citation>
Krainer, K., Mussner, L., Behm, M., and Hausmann, H.: Multi-discipliary
investigation of an active rock glacier in the Sella Group (Dolomites;
Northern Italy), Austrian Journal of Earth Sciences, 105, 48–62, 2012.</mixed-citation></ref>
      <ref id="bib1.bib39"><label>39</label><mixed-citation>Lambiel, C. and Pieracci, K.: Permafrost distribution in talus slopes located
within the alpine periglacial belt, Swiss Alps, Permafrost Periglac., 19,
293–304, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.624" ext-link-type="DOI">10.1002/ppp.624</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib40"><label>40</label><mixed-citation>Langston, G., Bentley, L. R., Hayashi, M., McClymont, A., and Pidlisecky, A.:
Internal structure and hydrological functions of an alpine proglacial
moraine, Hydrol. Process., 2967–2982, <ext-link xlink:href="http://dx.doi.org/10.1002/hyp.8144" ext-link-type="DOI">10.1002/hyp.8144</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib41"><label>41</label><mixed-citation>Lewkowicz, A. G., Etzelmüller, B., and Smith, S. L.: Characteristics of
Discontinuous Permafrost based on Ground Temperature Measurements and
Electrical Resistivity Tomography, Southern Yukon, Canada, Permafrost
Periglac., 22, 320–342, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.703" ext-link-type="DOI">10.1002/ppp.703</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib42"><label>42</label><mixed-citation>
Loke, M. H.: Tutorial: 2D and 3D electrical imaging surveys, Geotomo
Software, Malaysia, 2014.</mixed-citation></ref>
      <ref id="bib1.bib43"><label>43</label><mixed-citation>
Loke, M. H.: Rapid 3-D Resistivity &amp; IP inversion using the least-squares
method (For 3-D surveys using the pole-pole, pole-dipole, dipole-dipole,
rectangular, Wenner, Wenner-Schlumberger and non-conventional arrays) On
land, aquatic, cross-borehole and time-lapse surveys, Geotomo Software,
Malaysia, 2015.</mixed-citation></ref>
      <ref id="bib1.bib44"><label>44</label><mixed-citation>Loke, M. H. and Barker, R. D.: Practical techniques for 3D resistivity
surveys and data inversion1, Geophys. Prospect., 44, 499–523,
<ext-link xlink:href="http://dx.doi.org/10.1111/j.1365-2478.1996.tb00162.x" ext-link-type="DOI">10.1111/j.1365-2478.1996.tb00162.x</ext-link>, 1996.</mixed-citation></ref>
      <ref id="bib1.bib45"><label>45</label><mixed-citation>Loke, M. H., Chambers, J. E., Rucker, D. F., Kuras, O., and Wilkinson, P. B.:
Recent developments in the direct-current geoelectrical imaging method,
J. Appl. Geophys., 95, 135–156, <ext-link xlink:href="http://dx.doi.org/10.1016/j.jappgeo.2013.02.017" ext-link-type="DOI">10.1016/j.jappgeo.2013.02.017</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib46"><label>46</label><mixed-citation>Luetschg, M., Stoeckli, V., Lehning, M., Haeberli, W., and Ammann, W.:
Temperatures in two boreholes at Flüela Pass, Eastern Swiss Alps: The
effect of snow redistribution on permafrost distribution patterns in high
mountain areas, Permafrost Periglac., 15, 283–297, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.500" ext-link-type="DOI">10.1002/ppp.500</ext-link>,
2004.</mixed-citation></ref>
      <ref id="bib1.bib47"><label>47</label><mixed-citation>Luetschg, M., Lehning, M., and Haeberli, W.: A sensitivity study of factors
influencing warm/thin permafrost in the Swiss Alps, J. Glaciol., 54,
696–704, <ext-link xlink:href="http://dx.doi.org/10.3189/002214308786570881" ext-link-type="DOI">10.3189/002214308786570881</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib48"><label>48</label><mixed-citation>Lugon, R., Delaloye, R., Serrano, E., Reynard, E., Lambiel, C., and
González-Trueba, J. J.: Permafrost and Little Ice Age glacier
relationships, Posets Massif, Central Pyrenees, Spain, Permafrost Periglac.,
15, 207–220, <ext-link xlink:href="http://dx.doi.org/10.1002/ppp.494" ext-link-type="DOI">10.1002/ppp.494</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib49"><label>49</label><mixed-citation>Matsuoka, N., Ikeda, A., and Date, T.: Morphometric analysis of solifluction
lobes and rock glaciers in the Swiss Alps, Permafrost Periglac., 16, 99–113,
<ext-link xlink:href="http://dx.doi.org/10.1002/ppp.517" ext-link-type="DOI">10.1002/ppp.517</ext-link>, 2005.</mixed-citation></ref>
      <ref id="bib1.bib50"><label>50</label><mixed-citation>Maurer, H. and Hauck, C.: Geophysical imaging of alpine rock glaciers,
J. Glaciol., 53, 110–120, <ext-link xlink:href="http://dx.doi.org/10.3189/172756507781833893" ext-link-type="DOI">10.3189/172756507781833893</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib51"><label>51</label><mixed-citation>Monnier, S., Camerlynck, C., Rejiba, F., Kinnard, C., Feuillet, T., and
Dhemaied, A.: Structure and genesis of the Thabor rock glacier (Northern
French Alps) determined from morphological and ground-penetrating radar
surveys, Geomorphology, 134, 269–279, <ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2011.07.004" ext-link-type="DOI">10.1016/j.geomorph.2011.07.004</ext-link>,
2011.</mixed-citation></ref>
      <ref id="bib1.bib52"><label>52</label><mixed-citation>Monnier, S., Camerlynck, C., Rejiba, F., Kinnard, C., and Galibert, P.-Y.:
Evidencing a large body of ice in a rock glacier, Vanoise Massif, Northern
French Alps, Geogr. Ann. A, 95, 109–123, <ext-link xlink:href="http://dx.doi.org/10.1111/geoa.12004" ext-link-type="DOI">10.1111/geoa.12004</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib53"><label>53</label><mixed-citation>Musil, M., Maurer, H., Hollinger, K., and Green, A. G.: Internal structure of
an alpine rock glacier based on crosshole georadar traveltimes and
amplitudes, Geophys. Prospect., 54, 273–285,
<ext-link xlink:href="http://dx.doi.org/10.1111/j.1365-2478.2006.00534.x" ext-link-type="DOI">10.1111/j.1365-2478.2006.00534.x</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib54"><label>54</label><mixed-citation>Otto, J. C. and Sass, O.: Comparing geophysical methods for talus slope
investigations in the Turtmann valley (Swiss Alps), Geomorphology, 76,
257–272, <ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2005.11.008" ext-link-type="DOI">10.1016/j.geomorph.2005.11.008</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib55"><label>55</label><mixed-citation>Otto, J. C., Keuschnig, M., Götz, J., Marbach, M., and Schrott, L.:
Detection Of Mountain Permafrost By Combining High Resolution Surface And
Subsurface Information – An Example From The Glatzbach Catchment, Austrian
Alps, Geogr. Ann. A, 94, 43–57, <ext-link xlink:href="http://dx.doi.org/10.1111/j.1468-0459.2012.00455.x" ext-link-type="DOI">10.1111/j.1468-0459.2012.00455.x</ext-link>,
2012.</mixed-citation></ref>
      <ref id="bib1.bib56"><label>56</label><mixed-citation>Pellet, C., Hilbich, C., Marmy, A., and Hauck, C.: Soil moisture data for the
validation of permafrost models using direct and indirect measurement
approaches at three alpine sites, Front. Earth Sci., 3, 91,
<ext-link xlink:href="http://dx.doi.org/10.3389/feart.2015.00091" ext-link-type="DOI">10.3389/feart.2015.00091</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib57"><label>57</label><mixed-citation>Pogliotti, P., Guglielmin, M., Cremonese, E., Morra di Cella, U., Filippa,
G., Pellet, C., and Hauck, C.: Warming permafrost and active layer
variability at Cime Bianche, Western European Alps, The Cryosphere, 9,
647–661, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-9-647-2015" ext-link-type="DOI">10.5194/tc-9-647-2015</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib58"><label>58</label><mixed-citation>Ribolini, A., Guglielmin, M., Fabre, D., Bodin, X., Marchisio, M., Sartini,
S., Spagnolo, M., and Schoeneich, P.: The internal structure of rock glaciers
and recently deglaciated slopes as revealed by geoelectrical tomography:
Insights on permafrost and recent glacial evolution in the Central and
Western Alps (Italy–France), Quaternary Sci. Rev., 29, 507–521,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.quascirev.2009.10.008" ext-link-type="DOI">10.1016/j.quascirev.2009.10.008</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib59"><label>59</label><mixed-citation>Rödder, T. and Kneisel, C.: Permafrost mapping using quasi-3D resistivity
imaging, Murtèl, Swiss Alps, Near Surf. Geophys., 10, 117–127,
<ext-link xlink:href="http://dx.doi.org/10.3997/1873-0604.2011029" ext-link-type="DOI">10.3997/1873-0604.2011029</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib60"><label>60</label><mixed-citation>Ross, N., Brabham, P. J., Harris, C., and Christiansen, H. H.: Internal
Structure of Open System Pingos, Adventdalen, Svalbard: The Use of
Resistivity Tomography to Assess Ground-ice Conditions, J. Environ. Eng.
Geoph., 12, 113–126, <ext-link xlink:href="http://dx.doi.org/10.2113/JEEG12.1.113" ext-link-type="DOI">10.2113/JEEG12.1.113</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib61"><label>61</label><mixed-citation>
Scapozza, C. and Laigre, L.: The contribution of Electrical Resistivity
Tomography (ERT) in Alpine dynamics geomorphology: case studies from the
Swiss Alps?, Géomorphologie, 20, 27–42, 2014.</mixed-citation></ref>
      <ref id="bib1.bib62"><label>62</label><mixed-citation>Scapozza, C., Lambiel, C., Baron, L., Marescot, L., and Reynard, E.: Internal
structure and permafrost distribution in two alpine periglacial talus slopes,
Valais, Swiss Alps, Geomorphology, 132, 208–221,
<ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2011.05.010" ext-link-type="DOI">10.1016/j.geomorph.2011.05.010</ext-link>, 2011.</mixed-citation></ref>
      <ref id="bib1.bib63"><label>63</label><mixed-citation>Scherler, M., Hauck, C., Hoelzle, M., and Salzmann, N.: Modeled sensitivity
of two alpine permafrost sites to RCM-based climate scenarios, J. Geophys.
Res.-Earth, 118, 780–794, <ext-link xlink:href="http://dx.doi.org/10.1002/jgrf.20069" ext-link-type="DOI">10.1002/jgrf.20069</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib64"><label>64</label><mixed-citation>Schneider, S., Hoelzle, M., and Hauck, C.: Influence of surface and
subsurface heterogeneity on observed borehole temperatures at a mountain
permafrost site in the Upper Engadine, Swiss Alps, The Cryosphere, 6,
517–531, <ext-link xlink:href="http://dx.doi.org/10.5194/tc-6-517-2012" ext-link-type="DOI">10.5194/tc-6-517-2012</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib65"><label>65</label><mixed-citation>Schneider, S., Daengeli, S., Hauck, C., and Hoelzle, M.: A spatial and
temporal analysis of different periglacial materials by using geoelectrical,
seismic and borehole temperature data at Murtèl–Corvatsch, Upper
Engadin, Swiss Alps, Geogr. Helv., 68, 265–280,
<ext-link xlink:href="http://dx.doi.org/10.5194/gh-68-265-2013" ext-link-type="DOI">10.5194/gh-68-265-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib66"><label>66</label><mixed-citation>Schrott, L. and Hoffmann, T.: Refraction Seismics, in: Applied Geophysics in
Periglacial Environments, Cambridge University Press, 57–80, 2008.
 </mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bib67"><label>67</label><mixed-citation>Schrott, L. and Sass, O.: Application of field geophysics in geomorphology:
Advances and limitations exemplified by case studies, Geomorphology, 93,
55–73, <ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2006.12.024" ext-link-type="DOI">10.1016/j.geomorph.2006.12.024</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib68"><label>68</label><mixed-citation>Seppi, R., Zanoner, T., Carton, A., Bondesan, A., Francese, R., Carturan, L.,
Zumiani, M., Giorgi, M., and Ninfo, A.: Current transition from glacial to
periglacial processes in the Dolomites (South-Eastern Alps), Geomorphology,
228, 71–86, <ext-link xlink:href="http://dx.doi.org/10.1016/j.geomorph.2014.08.025" ext-link-type="DOI">10.1016/j.geomorph.2014.08.025</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib69"><label>69</label><mixed-citation>Springman, S. M., Arenson, L. U., Yamamoto, Y., Maurer, H., Kos, A., Buchli,
T., and Derungs, G.: Multidisciplinary Investigations On Three Rock Glaciers
In The Swiss Alps: Legacies And Future Perspectives, Geogr. Ann. A, 94,
215–243, <ext-link xlink:href="http://dx.doi.org/10.1111/j.1468-0459.2012.00464.x" ext-link-type="DOI">10.1111/j.1468-0459.2012.00464.x</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib70"><label>70</label><mixed-citation>Stummer, P., Maurer, H., and Green, A. G.: Experimental design: Electrical
resistivity data sets that provide optimum subsurface information,
Geophysics, 69, 120–139, <ext-link xlink:href="http://dx.doi.org/10.1190/1.1649381" ext-link-type="DOI">10.1190/1.1649381</ext-link>, 2004.</mixed-citation></ref>
      <ref id="bib1.bib71"><label>71</label><mixed-citation>Vonder Mühll, D. S., Hauck, C., and Lehmann, F.: Verification of
geophysical models in Alpine permafrost using borehole information, Ann.
Glaciol., 31, 300–306, <ext-link xlink:href="http://dx.doi.org/10.3189/172756400781820057" ext-link-type="DOI">10.3189/172756400781820057</ext-link>, 2000.</mixed-citation></ref>
      <ref id="bib1.bib72"><label>72</label><mixed-citation>Wilkinson, P. B., Meldrum, P. I., Chambers, J. E., Kuras, O., and Ogilvy,
R. D.: Improved strategies for the automatic selection of optimized sets of
electrical resistivity tomography measurement configurations, Geophys.
J. Int., 167, 1119–1126, <ext-link xlink:href="http://dx.doi.org/10.1111/j.1365-246X.2006.03196.x" ext-link-type="DOI">10.1111/j.1365-246X.2006.03196.x</ext-link>, 2006.</mixed-citation></ref>

  </ref-list><app-group content-type="float"><app><title/>

    </app></app-group></back>
    <!--<article-title-html>Internal structure of two alpine rock glaciers investigated by quasi-3-D electrical resistivity imaging</article-title-html>
<abstract-html><p class="p">Interactions between different formative processes are reflected in the
internal structure of rock glaciers. Therefore, the detection of subsurface
conditions can help to enhance our understanding of landform development. For
an assessment of subsurface conditions, we present an analysis of the spatial
variability of active layer thickness, ground ice content and frost table
topography for two different rock glaciers in the Eastern Swiss Alps by means
of quasi-3-D electrical resistivity imaging (ERI). This approach enables an
extensive mapping of subsurface structures and a spatial overlay between
site-specific surface and subsurface characteristics. At Nair rock glacier,
we discovered a gradual descent of the frost table in a downslope direction
and a constant decrease of ice content which follows the observed surface
topography. This is attributed to ice formation by refreezing meltwater from
an embedded snow bank or from a subsurface ice patch which reshapes the
permafrost layer. The heterogeneous ground ice distribution at Uertsch rock
glacier indicates that multiple processes on different time domains were
involved in the development. Resistivity values which represent frozen
conditions vary within a wide range and indicate a successive formation which
includes several advances, past glacial overrides and creep processes on the
rock glacier surface. In combination with the observed topography, quasi-3-D
ERI enables us to delimit areas of extensive and compressive flow in close
proximity. Excellent data quality was provided by a good coupling of
electrodes to the ground in the pebbly material of the investigated rock
glaciers. Results show the value of the quasi-3-D ERI approach but advise the
application of complementary geophysical methods for interpreting the
results.</p></abstract-html>
<ref-html id="bib1.bib1"><label>1</label><mixed-citation>
Berger, J., Krainer, K., and Mostler, W.: Dynamics of an active rock glacier
(Ötztal Alps, Austria), Quarternary Res., 62, 233–242,
<a href="http://dx.doi.org/10.1016/j.yqres.2004.07.002" target="_blank">doi:10.1016/j.yqres.2004.07.002</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>2</label><mixed-citation>
Boeckli, L., Brenning, A., Gruber, S., and Noetzli, J.: Permafrost
distribution in the European Alps: calculation and evaluation of an index map
and summary statistics, The Cryosphere, 6, 807–820,
<a href="http://dx.doi.org/10.5194/tc-6-807-2012" target="_blank">doi:10.5194/tc-6-807-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>3</label><mixed-citation>
Chambers, J. E., Ogilvy, R. D., Kuras, O., Cripps, J., and Meldrum, P. I.: 3D
electrical imaging of known targets at a controlled environmental test site,
Environ. Geol., 41, 690–704, <a href="http://dx.doi.org/10.1007/s00254-001-0452-4" target="_blank">doi:10.1007/s00254-001-0452-4</a>, 2002.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>4</label><mixed-citation>
Coaz, J. W. F. and Leuzinger, R.: Bevers, Eidg. Stabsbureau, Bern, 1878.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>5</label><mixed-citation>
Coaz, J. W. F., Leuzinger, R., and Held, L.: St. Moritz, Eidg. Stabsbureau
[i.e. Eidg. Landestopographie], Bern, Nachträge 1917, 1925.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>6</label><mixed-citation>
Coaz, J. W. F., Leuzinger, R., and Held, L.: St. Moritz, Eidg.
Landestopographie, Bern, Nachträge 1944, 1946.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>7</label><mixed-citation>
Draebing, D.: Application of refraction seismics in alpine permafrost
studies: A review, Earth-Sci. Rev., 155, 136–152, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>8</label><mixed-citation>
Dusik, J.-M., Leopold, M., Heckmann, T., Haas, F., Hilger, L., Morche, D.,
Neugirg, F., and Becht, M.: Influence of glacier advance on the development
of the multipart Riffeltal rock glacier, Central Austrian Alps, Earth Surf.
Proc. Land., 40, 965–980, <a href="http://dx.doi.org/10.1002/esp.3695" target="_blank">doi:10.1002/esp.3695</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>9</label><mixed-citation>
Etzelmüller, B., Heggem, E. S. F., Sharkhuu, N., Frauenfelder, R.,
Kääb, A., and Goulden, C.: Mountain permafrost distribution modelling
using a multi-criteria approach in the Hövsgöl area, northern
Mongolia, Permafrost Periglac., 17, 91–104, <a href="http://dx.doi.org/10.1002/ppp.554" target="_blank">doi:10.1002/ppp.554</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>10</label><mixed-citation>
Farbrot, H., Etzelmüller, B., Schuler, T. V., Guðmundsson, Á.,
Eiken, T., Humlum, O., and Björnsson, H.: Thermal characteristics and
impact of climate change on mountain permafrost in Iceland, J. Geophys. Res.,
112, F03S90, <a href="http://dx.doi.org/10.1029/2006JF000541" target="_blank">doi:10.1029/2006JF000541</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>11</label><mixed-citation>
Frehner, M., Ling, A. H. M., and Gärtner-Roer, I.: Furrow-and-Ridge
Morphology on Rockglaciers Explained by Gravity-Driven Buckle Folding: A Case
Study From the Murtèl Rockglacier (Switzerland), Permafrost Periglac.,
26, 57–66, <a href="http://dx.doi.org/10.1002/ppp.1831" target="_blank">doi:10.1002/ppp.1831</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>12</label><mixed-citation>
Geometrics: SeisImager/2D<span style="position:relative; bottom:0.5em; " class="text">™</span> Manual, Version
3.3, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>13</label><mixed-citation>
Gharibi, M. and Bentley, L. R.: Resolution of 3-D Electrical Resistivity
Images from Inversions of 2-D Orthogonal Lines, J. Environ. Eng. Geoph., 10,
339–349, <a href="http://dx.doi.org/10.2113/JEEG10.4.339" target="_blank">doi:10.2113/JEEG10.4.339</a>, 2005.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>14</label><mixed-citation>
Haeberli, W. and Vonder Mühll, D. S.: On the characteristics and possible
origins of ice in rock glacier permafrost, Z. Geomorphol., Suppl.-Bd. 104,
43–57, 1996.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>15</label><mixed-citation>
Haeberli, W., Hallet, B., Arenson, L. U., Elconin, R., Humlum, O.,
Kääb, A., Kaufmann, V., Ladanyi, B., Matsuoka, N., Springman, S. M.,
and Vonder Mühll, D. S.: Permafrost creep and rock glacier dynamics,
Permafrost Periglac., 17, 189–214, <a href="http://dx.doi.org/10.1002/ppp.561" target="_blank">doi:10.1002/ppp.561</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>16</label><mixed-citation>
Hanson, S. and Hoelzle, M.: The thermal regime of the active layer at the
Murtèl rock glacier based on data from 2002, Permafrost Periglac., 15,
273–282, <a href="http://dx.doi.org/10.1002/ppp.499" target="_blank">doi:10.1002/ppp.499</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>17</label><mixed-citation>
Harris, C., Arenson, L. U., Christiansen, H. H., Etzelmüller, B.,
Frauenfelder, R., Gruber, S., Haeberli, W., Hauck, C., Hoelzle, M., Humlum,
O., Isaksen, K., Kääb, A., Kern-Lütschg, M. A., Lehning, M.,
Matsuoka, N., Murton, J. B., Nötzli, J., Phillips, M., Ross, N.,
Seppälä, M., Springman, S. M., and Vonder Mühll, D. S.:
Permafrost and climate in Europe: Monitoring and modelling thermal,
geomorphological and geotechnical responses, Earth-Sci. Rev., 92, 117–171,
<a href="http://dx.doi.org/10.1016/j.earscirev.2008.12.002" target="_blank">doi:10.1016/j.earscirev.2008.12.002</a>, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>18</label><mixed-citation>
Harris, S. A. and Pedersen, D. E.: Thermal regimes beneath coarse blocky
materials, Permafrost Periglac., 9, 107–120,
<a href="http://dx.doi.org/10.1002/(SICI)1099-1530(199804/06)9:2&lt;107:AID-PPP277&gt;3.0.CO;2-G" target="_blank">doi:10.1002/(SICI)1099-1530(199804/06)9:2&lt;107:AID-PPP277&gt;3.0.CO;2-G</a>,
1998.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>19</label><mixed-citation>
Hauck, C.: Frozen ground monitoring using DC resistivity tomography, Geophys.
Res. Lett., 29, 12-1–12-4, <a href="http://dx.doi.org/10.1029/2002GL014995" target="_blank">doi:10.1029/2002GL014995</a>, 2002.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>20</label><mixed-citation>
Hauck, C.: New Concepts in Geophysical Surveying and Data Interpretation for
Permafrost Terrain, Permafrost Periglac., 24, 131–137,
<a href="http://dx.doi.org/10.1002/ppp.1774" target="_blank">doi:10.1002/ppp.1774</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>21</label><mixed-citation>
Hauck, C., Böttcher, M., and Maurer, H.: A new model for estimating
subsurface ice content based on combined electrical and seismic data sets,
The Cryosphere, 5, 453–468, <a href="http://dx.doi.org/10.5194/tc-5-453-2011" target="_blank">doi:10.5194/tc-5-453-2011</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>22</label><mixed-citation>
Hausmann, H., Krainer, K., Brückl, E., and Ullrich, C.: Internal
structure, ice content and dynamics of Ölgrube and Kaiserberg rock
glaciers (Ötztal Alps, Austria) de-termined from geophysical surveys,
Austrian Journal of Earth Sciences, 105, 12–31, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib23"><label>23</label><mixed-citation>
Hilbich, C., Marescot, L., Hauck, C., Loke, M. H., and Mäusbacher, R.:
Applicability of electrical resistivity tomography monitoring to coarse
blocky and ice-rich permafrost landforms, Permafrost Periglac., 20, 269–284,
<a href="http://dx.doi.org/10.1002/ppp.652" target="_blank">doi:10.1002/ppp.652</a>, 2009.
</mixed-citation></ref-html>
<ref-html id="bib1.bib24"><label>24</label><mixed-citation>
Hoelzle, M., Wegmann, M., and Krummenacher, B.: Miniature temperature
dataloggers for mapping and monitoring of permafrost in high mountain areas:
First experience from the Swiss Alps, Permafrost Periglac., 10, 113–124,
<a href="http://dx.doi.org/10.1002/(SICI)1099-1530(199904/06)10:2&lt;113:AID-PPP317&gt;3.0.CO;2-A" target="_blank">doi:10.1002/(SICI)1099-1530(199904/06)10:2&lt;113:AID-PPP317&gt;3.0.CO;2-A</a>,
1999.
</mixed-citation></ref-html>
<ref-html id="bib1.bib25"><label>25</label><mixed-citation>
Ikeda, A.: Combination of conventional geophysical methods for sounding the
composition of rock glaciers in the Swiss Alps, Permafrost Periglac., 17,
35–48, <a href="http://dx.doi.org/10.1002/ppp.550" target="_blank">doi:10.1002/ppp.550</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib26"><label>26</label><mixed-citation>
Ikeda, A. and Matsuoka, N.: Pebbly versus bouldery rock glaciers: Morphology,
structure and processes, Geomorphology, 73, 279–296,
<a href="http://dx.doi.org/10.1016/j.geomorph.2005.07.015" target="_blank">doi:10.1016/j.geomorph.2005.07.015</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib27"><label>27</label><mixed-citation>
Ikeda, A., Matsuoka, N., and Kääb, A.: Fast deformation of
perennially frozen debris in a warm rock glacier in the Swiss Alps: An effect
of liquid water, J. Geophys. Res., 113, F01021, <a href="http://dx.doi.org/10.1029/2007JF000859" target="_blank">doi:10.1029/2007JF000859</a>,
2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib28"><label>28</label><mixed-citation>
Isaksen, K., Ødegård, R. S., Eiken, T., and Sollid, J. L.:
Composition, flow and development of two tongue-shaped rock glaciers in the
permafrost of Svalbard, Permafrost Periglac., 11, 241–257,
<a href="http://dx.doi.org/10.1002/1099-1530(200007/09)11:3&lt;241:AID-PPP358&gt;3.0.CO;2-A" target="_blank">doi:10.1002/1099-1530(200007/09)11:3&lt;241:AID-PPP358&gt;3.0.CO;2-A</a>,
2000.
</mixed-citation></ref-html>
<ref-html id="bib1.bib29"><label>29</label><mixed-citation>
Kääb, A. and Weber, M.: Development of transverse ridges on rock
glaciers: Field measurements and laboratory experiments, Permafrost
Periglac., 15, 379–391, <a href="http://dx.doi.org/10.1002/ppp.506" target="_blank">doi:10.1002/ppp.506</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib30"><label>30</label><mixed-citation>
Kääb, A., Frauenfelder, R., and Roer, I.: On the response of
rockglacier creep to surface temperature increase, Global Planet. Change, 56,
172–187, <a href="http://dx.doi.org/10.1016/j.gloplacha.2006.07.005" target="_blank">doi:10.1016/j.gloplacha.2006.07.005</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib31"><label>31</label><mixed-citation>
Kneisel, C., Lehmkuhl, F., Winkler, S., Tressel, E., and Schröder, H.:
Legende für geomorphologische Kartierungen in Hochgebirgen (GMK
Hochgebirge), Geographische Gesellschaft, Trier, Trierer geographische
Studien, 18, 24 pp., 1998.
</mixed-citation></ref-html>
<ref-html id="bib1.bib32"><label>32</label><mixed-citation>
Kneisel, C.: Frozen ground conditions in a subarctic mountain environment,
Northern Sweden, Geomorphology, 118, 80–92,
<a href="http://dx.doi.org/10.1016/j.geomorph.2009.12.010" target="_blank">doi:10.1016/j.geomorph.2009.12.010</a>, 2010a.
</mixed-citation></ref-html>
<ref-html id="bib1.bib33"><label>33</label><mixed-citation>
Kneisel, C.: The nature and dynamics of frozen ground in alpine and subarctic
periglacial environments, Holocene, 20, 423–445,
<a href="http://dx.doi.org/10.1177/0959683609353432" target="_blank">doi:10.1177/0959683609353432</a>, 2010b.
</mixed-citation></ref-html>
<ref-html id="bib1.bib34"><label>34</label><mixed-citation>
Kneisel, C. and Kääb, A.: Mountain permafrost dynamics within a
recently exposed glacier forefield inferred by a combined geomorphological,
geophysical and photogrammetrical approach, Earth Surf. Proc. Land., 32,
1797–1810, <a href="http://dx.doi.org/10.1002/esp.1488" target="_blank">doi:10.1002/esp.1488</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib35"><label>35</label><mixed-citation>
Kneisel, C., Sæmundsson, Þ., and Beylich, A. A.: Reconnaissance
Surveys Of Contemporary Permafrost Environments In Central Iceland Using
Geoelectrical Methods: Implications For Permafrost Degradation And Sediment
Fluxes, Geogr. Ann. A, 89, 41–50, <a href="http://dx.doi.org/10.1111/j.1468-0459.2007.00306.x" target="_blank">doi:10.1111/j.1468-0459.2007.00306.x</a>,
2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib36"><label>36</label><mixed-citation>
Kneisel, C., Hauck, C., Fortier, R., and Moorman, B.: Advances in geophysical
methods for permafrost investigations, Permafrost Periglac., 19, 157–178,
<a href="http://dx.doi.org/10.1002/ppp.616" target="_blank">doi:10.1002/ppp.616</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib37"><label>37</label><mixed-citation>
Kneisel, C., Emmert, A., and Kästl, J.: Application of 3D electrical
resistivity imaging for mapping frozen ground conditions exemplified by three
case studies, Geomorphology, 210, 71–82,
<a href="http://dx.doi.org/10.1016/j.geomorph.2013.12.022" target="_blank">doi:10.1016/j.geomorph.2013.12.022</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib38"><label>38</label><mixed-citation>
Krainer, K., Mussner, L., Behm, M., and Hausmann, H.: Multi-discipliary
investigation of an active rock glacier in the Sella Group (Dolomites;
Northern Italy), Austrian Journal of Earth Sciences, 105, 48–62, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib39"><label>39</label><mixed-citation>
Lambiel, C. and Pieracci, K.: Permafrost distribution in talus slopes located
within the alpine periglacial belt, Swiss Alps, Permafrost Periglac., 19,
293–304, <a href="http://dx.doi.org/10.1002/ppp.624" target="_blank">doi:10.1002/ppp.624</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib40"><label>40</label><mixed-citation>
Langston, G., Bentley, L. R., Hayashi, M., McClymont, A., and Pidlisecky, A.:
Internal structure and hydrological functions of an alpine proglacial
moraine, Hydrol. Process., 2967–2982, <a href="http://dx.doi.org/10.1002/hyp.8144" target="_blank">doi:10.1002/hyp.8144</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib41"><label>41</label><mixed-citation>
Lewkowicz, A. G., Etzelmüller, B., and Smith, S. L.: Characteristics of
Discontinuous Permafrost based on Ground Temperature Measurements and
Electrical Resistivity Tomography, Southern Yukon, Canada, Permafrost
Periglac., 22, 320–342, <a href="http://dx.doi.org/10.1002/ppp.703" target="_blank">doi:10.1002/ppp.703</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib42"><label>42</label><mixed-citation>
Loke, M. H.: Tutorial: 2D and 3D electrical imaging surveys, Geotomo
Software, Malaysia, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib43"><label>43</label><mixed-citation>
Loke, M. H.: Rapid 3-D Resistivity &amp; IP inversion using the least-squares
method (For 3-D surveys using the pole-pole, pole-dipole, dipole-dipole,
rectangular, Wenner, Wenner-Schlumberger and non-conventional arrays) On
land, aquatic, cross-borehole and time-lapse surveys, Geotomo Software,
Malaysia, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib44"><label>44</label><mixed-citation>
Loke, M. H. and Barker, R. D.: Practical techniques for 3D resistivity
surveys and data inversion1, Geophys. Prospect., 44, 499–523,
<a href="http://dx.doi.org/10.1111/j.1365-2478.1996.tb00162.x" target="_blank">doi:10.1111/j.1365-2478.1996.tb00162.x</a>, 1996.
</mixed-citation></ref-html>
<ref-html id="bib1.bib45"><label>45</label><mixed-citation>
Loke, M. H., Chambers, J. E., Rucker, D. F., Kuras, O., and Wilkinson, P. B.:
Recent developments in the direct-current geoelectrical imaging method,
J. Appl. Geophys., 95, 135–156, <a href="http://dx.doi.org/10.1016/j.jappgeo.2013.02.017" target="_blank">doi:10.1016/j.jappgeo.2013.02.017</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib46"><label>46</label><mixed-citation>
Luetschg, M., Stoeckli, V., Lehning, M., Haeberli, W., and Ammann, W.:
Temperatures in two boreholes at Flüela Pass, Eastern Swiss Alps: The
effect of snow redistribution on permafrost distribution patterns in high
mountain areas, Permafrost Periglac., 15, 283–297, <a href="http://dx.doi.org/10.1002/ppp.500" target="_blank">doi:10.1002/ppp.500</a>,
2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib47"><label>47</label><mixed-citation>
Luetschg, M., Lehning, M., and Haeberli, W.: A sensitivity study of factors
influencing warm/thin permafrost in the Swiss Alps, J. Glaciol., 54,
696–704, <a href="http://dx.doi.org/10.3189/002214308786570881" target="_blank">doi:10.3189/002214308786570881</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib48"><label>48</label><mixed-citation>
Lugon, R., Delaloye, R., Serrano, E., Reynard, E., Lambiel, C., and
González-Trueba, J. J.: Permafrost and Little Ice Age glacier
relationships, Posets Massif, Central Pyrenees, Spain, Permafrost Periglac.,
15, 207–220, <a href="http://dx.doi.org/10.1002/ppp.494" target="_blank">doi:10.1002/ppp.494</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib49"><label>49</label><mixed-citation>
Matsuoka, N., Ikeda, A., and Date, T.: Morphometric analysis of solifluction
lobes and rock glaciers in the Swiss Alps, Permafrost Periglac., 16, 99–113,
<a href="http://dx.doi.org/10.1002/ppp.517" target="_blank">doi:10.1002/ppp.517</a>, 2005.
</mixed-citation></ref-html>
<ref-html id="bib1.bib50"><label>50</label><mixed-citation>
Maurer, H. and Hauck, C.: Geophysical imaging of alpine rock glaciers,
J. Glaciol., 53, 110–120, <a href="http://dx.doi.org/10.3189/172756507781833893" target="_blank">doi:10.3189/172756507781833893</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib51"><label>51</label><mixed-citation>
Monnier, S., Camerlynck, C., Rejiba, F., Kinnard, C., Feuillet, T., and
Dhemaied, A.: Structure and genesis of the Thabor rock glacier (Northern
French Alps) determined from morphological and ground-penetrating radar
surveys, Geomorphology, 134, 269–279, <a href="http://dx.doi.org/10.1016/j.geomorph.2011.07.004" target="_blank">doi:10.1016/j.geomorph.2011.07.004</a>,
2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib52"><label>52</label><mixed-citation>
Monnier, S., Camerlynck, C., Rejiba, F., Kinnard, C., and Galibert, P.-Y.:
Evidencing a large body of ice in a rock glacier, Vanoise Massif, Northern
French Alps, Geogr. Ann. A, 95, 109–123, <a href="http://dx.doi.org/10.1111/geoa.12004" target="_blank">doi:10.1111/geoa.12004</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib53"><label>53</label><mixed-citation>
Musil, M., Maurer, H., Hollinger, K., and Green, A. G.: Internal structure of
an alpine rock glacier based on crosshole georadar traveltimes and
amplitudes, Geophys. Prospect., 54, 273–285,
<a href="http://dx.doi.org/10.1111/j.1365-2478.2006.00534.x" target="_blank">doi:10.1111/j.1365-2478.2006.00534.x</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib54"><label>54</label><mixed-citation>
Otto, J. C. and Sass, O.: Comparing geophysical methods for talus slope
investigations in the Turtmann valley (Swiss Alps), Geomorphology, 76,
257–272, <a href="http://dx.doi.org/10.1016/j.geomorph.2005.11.008" target="_blank">doi:10.1016/j.geomorph.2005.11.008</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib55"><label>55</label><mixed-citation>
Otto, J. C., Keuschnig, M., Götz, J., Marbach, M., and Schrott, L.:
Detection Of Mountain Permafrost By Combining High Resolution Surface And
Subsurface Information – An Example From The Glatzbach Catchment, Austrian
Alps, Geogr. Ann. A, 94, 43–57, <a href="http://dx.doi.org/10.1111/j.1468-0459.2012.00455.x" target="_blank">doi:10.1111/j.1468-0459.2012.00455.x</a>,
2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib56"><label>56</label><mixed-citation>
Pellet, C., Hilbich, C., Marmy, A., and Hauck, C.: Soil moisture data for the
validation of permafrost models using direct and indirect measurement
approaches at three alpine sites, Front. Earth Sci., 3, 91,
<a href="http://dx.doi.org/10.3389/feart.2015.00091" target="_blank">doi:10.3389/feart.2015.00091</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib57"><label>57</label><mixed-citation>
Pogliotti, P., Guglielmin, M., Cremonese, E., Morra di Cella, U., Filippa,
G., Pellet, C., and Hauck, C.: Warming permafrost and active layer
variability at Cime Bianche, Western European Alps, The Cryosphere, 9,
647–661, <a href="http://dx.doi.org/10.5194/tc-9-647-2015" target="_blank">doi:10.5194/tc-9-647-2015</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib58"><label>58</label><mixed-citation>
Ribolini, A., Guglielmin, M., Fabre, D., Bodin, X., Marchisio, M., Sartini,
S., Spagnolo, M., and Schoeneich, P.: The internal structure of rock glaciers
and recently deglaciated slopes as revealed by geoelectrical tomography:
Insights on permafrost and recent glacial evolution in the Central and
Western Alps (Italy–France), Quaternary Sci. Rev., 29, 507–521,
<a href="http://dx.doi.org/10.1016/j.quascirev.2009.10.008" target="_blank">doi:10.1016/j.quascirev.2009.10.008</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib59"><label>59</label><mixed-citation>
Rödder, T. and Kneisel, C.: Permafrost mapping using quasi-3D resistivity
imaging, Murtèl, Swiss Alps, Near Surf. Geophys., 10, 117–127,
<a href="http://dx.doi.org/10.3997/1873-0604.2011029" target="_blank">doi:10.3997/1873-0604.2011029</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib60"><label>60</label><mixed-citation>
Ross, N., Brabham, P. J., Harris, C., and Christiansen, H. H.: Internal
Structure of Open System Pingos, Adventdalen, Svalbard: The Use of
Resistivity Tomography to Assess Ground-ice Conditions, J. Environ. Eng.
Geoph., 12, 113–126, <a href="http://dx.doi.org/10.2113/JEEG12.1.113" target="_blank">doi:10.2113/JEEG12.1.113</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib61"><label>61</label><mixed-citation>
Scapozza, C. and Laigre, L.: The contribution of Electrical Resistivity
Tomography (ERT) in Alpine dynamics geomorphology: case studies from the
Swiss Alps?, Géomorphologie, 20, 27–42, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib62"><label>62</label><mixed-citation>
Scapozza, C., Lambiel, C., Baron, L., Marescot, L., and Reynard, E.: Internal
structure and permafrost distribution in two alpine periglacial talus slopes,
Valais, Swiss Alps, Geomorphology, 132, 208–221,
<a href="http://dx.doi.org/10.1016/j.geomorph.2011.05.010" target="_blank">doi:10.1016/j.geomorph.2011.05.010</a>, 2011.
</mixed-citation></ref-html>
<ref-html id="bib1.bib63"><label>63</label><mixed-citation>
Scherler, M., Hauck, C., Hoelzle, M., and Salzmann, N.: Modeled sensitivity
of two alpine permafrost sites to RCM-based climate scenarios, J. Geophys.
Res.-Earth, 118, 780–794, <a href="http://dx.doi.org/10.1002/jgrf.20069" target="_blank">doi:10.1002/jgrf.20069</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib64"><label>64</label><mixed-citation>
Schneider, S., Hoelzle, M., and Hauck, C.: Influence of surface and
subsurface heterogeneity on observed borehole temperatures at a mountain
permafrost site in the Upper Engadine, Swiss Alps, The Cryosphere, 6,
517–531, <a href="http://dx.doi.org/10.5194/tc-6-517-2012" target="_blank">doi:10.5194/tc-6-517-2012</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib65"><label>65</label><mixed-citation>
Schneider, S., Daengeli, S., Hauck, C., and Hoelzle, M.: A spatial and
temporal analysis of different periglacial materials by using geoelectrical,
seismic and borehole temperature data at Murtèl–Corvatsch, Upper
Engadin, Swiss Alps, Geogr. Helv., 68, 265–280,
<a href="http://dx.doi.org/10.5194/gh-68-265-2013" target="_blank">doi:10.5194/gh-68-265-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib66"><label>66</label><mixed-citation>
Schrott, L. and Hoffmann, T.: Refraction Seismics, in: Applied Geophysics in
Periglacial Environments, Cambridge University Press, 57–80, 2008.

</mixed-citation></ref-html>
<ref-html id="bib1.bib67"><label>67</label><mixed-citation>
Schrott, L. and Sass, O.: Application of field geophysics in geomorphology:
Advances and limitations exemplified by case studies, Geomorphology, 93,
55–73, <a href="http://dx.doi.org/10.1016/j.geomorph.2006.12.024" target="_blank">doi:10.1016/j.geomorph.2006.12.024</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib68"><label>68</label><mixed-citation>
Seppi, R., Zanoner, T., Carton, A., Bondesan, A., Francese, R., Carturan, L.,
Zumiani, M., Giorgi, M., and Ninfo, A.: Current transition from glacial to
periglacial processes in the Dolomites (South-Eastern Alps), Geomorphology,
228, 71–86, <a href="http://dx.doi.org/10.1016/j.geomorph.2014.08.025" target="_blank">doi:10.1016/j.geomorph.2014.08.025</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib69"><label>69</label><mixed-citation>
Springman, S. M., Arenson, L. U., Yamamoto, Y., Maurer, H., Kos, A., Buchli,
T., and Derungs, G.: Multidisciplinary Investigations On Three Rock Glaciers
In The Swiss Alps: Legacies And Future Perspectives, Geogr. Ann. A, 94,
215–243, <a href="http://dx.doi.org/10.1111/j.1468-0459.2012.00464.x" target="_blank">doi:10.1111/j.1468-0459.2012.00464.x</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib70"><label>70</label><mixed-citation>
Stummer, P., Maurer, H., and Green, A. G.: Experimental design: Electrical
resistivity data sets that provide optimum subsurface information,
Geophysics, 69, 120–139, <a href="http://dx.doi.org/10.1190/1.1649381" target="_blank">doi:10.1190/1.1649381</a>, 2004.
</mixed-citation></ref-html>
<ref-html id="bib1.bib71"><label>71</label><mixed-citation>
Vonder Mühll, D. S., Hauck, C., and Lehmann, F.: Verification of
geophysical models in Alpine permafrost using borehole information, Ann.
Glaciol., 31, 300–306, <a href="http://dx.doi.org/10.3189/172756400781820057" target="_blank">doi:10.3189/172756400781820057</a>, 2000.
</mixed-citation></ref-html>
<ref-html id="bib1.bib72"><label>72</label><mixed-citation>
Wilkinson, P. B., Meldrum, P. I., Chambers, J. E., Kuras, O., and Ogilvy,
R. D.: Improved strategies for the automatic selection of optimized sets of
electrical resistivity tomography measurement configurations, Geophys.
J. Int., 167, 1119–1126, <a href="http://dx.doi.org/10.1111/j.1365-246X.2006.03196.x" target="_blank">doi:10.1111/j.1365-246X.2006.03196.x</a>, 2006.
</mixed-citation></ref-html>--></article>
